Reference

uplcom(4freebsd)

USB support for Prolific PL-2303/2303X/2303HX serial adapters driver

NAME

uplcom – USB support for Prolific PL-2303/2303X/2303HX serial adapters driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device usb device ucom device uplcom

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

uplcom_load="YES"

DESCRIPTION

The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.

The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

The uplcom driver supports the following devices and adapters:

  • ADLINK ND-6530 USB-Serial Adapter

  • Alcatel One Touch 535/735 Phone

  • Alcor AU9720 USB-RS232 Serial Adapter

  • AlDiga AL-11U Modem

  • Alltronix ACM003U00 Modem

  • Anchor Serial adapter

  • ATEN UC-232A

  • BAFO BF-800 and BF-810

  • Belkin F5U257

  • BenQ S81 Phone

  • Corega CG-USBRS232R Serial Adapter

  • Cressi Edy (Seiko) Diving Computer

  • ELECOM UC-SGT Serial Adapter

  • HAL Corporation Crossam2+USB IR commander

  • Hama USB RS-232 Serial Adapter

  • Hamlet exaggerate XURS232

  • HP LD220 Point-Of-Sale (POS) Display

  • IOGEAR UC-232A

  • I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5

  • iTegno WM1080A GSM/GFPRS Modem

  • iTegno WM2080A CDMA Modem

  • Leadtek 9531 GPS

  • Micromax 610U Modem

  • Microsoft Palm 700WX

  • Mobile Action MA-620 Infrared Adapter

  • Motorola Cables

  • Nokia CA-42 Cable

  • OTI DKU-5 cable

  • Panasonic TY-TP50P6-S flat screen

  • PLX CA-42 Phone Cable

  • PLANEX USB-RS232 URS-03

  • Prolific Generic USB-Serial Adapters

  • Prolific Pharos USB-Serial Adapter

  • RATOC REX-USB60

  • Radio Shack USB Serial Cable

  • Sagem USB-Serial Adapter

  • Samsung I330 Phone Cradle

  • Sandberg USB to Serial Link (model number 133-08)

  • Sanwa KB-USB2 Multimeter cable

  • Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones

  • Sitecom USB-Serial Adapter

  • SMART Technologies USB-Serial Adapter

  • Sony QN3 Phone Cable

  • Sony Ericsson Datapilot

  • Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables

  • SOURCENEXT KeikaiDenwa 8 (with and without charger)

  • Speed Dragon USB-Serial Cable

  • Syntech CPT-8001C Barcode Scanner

  • TDK UHA6400 and UPA9664 USB-PHS Adapters

  • TRENDnet USB to Serial Converter (TU-S9)

  • Tripp-Lite U209-000-R USB-Serial Adapter

  • UIC HCR331 Magnetic Stripe Card Reader

  • UIC MSR206 Magnetic Stripe Card Reader

  • Willcom W-SIM DD PHS terminal.(WS002IN)

  • YC-Cable USB-Serial Adapter

  • Zeagle N2iTion3 Diving Computer

SYSCTL VARIABLES

The following variables are available as both sysctl(8) variables and loader(8) tunables:

hw.usb.uplcom.debug

Debug output level, where 0 is debugging disabled and larger values increase debug message verbosity. Default is 0.

FILES

/dev/ttyU*

for callin ports

/dev/ttyU*.init
/dev/ttyU*.lock

corresponding callin initial-state and lock-state devices

/dev/cuaU*

for callout ports

/dev/cuaU*.init
/dev/cuaU*.lock

corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes ⟨[email protected]⟩ in April 2002.

History