Section 9

• spi_sync_transfer · synchronous SPI data transfer
• spi_unregister_driver · reverse effect of spi_register_driver
• spi_unregister_master · unregister SPI master controller
• spi_w8r16 · SPI synchronous 8 bit write followed by 16 bit read
• spi_w8r16be · SPI synchronous 8 bit write followed by 16 bit big-endian read
• spi_w8r8 · SPI synchronous 8 bit write followed by 8 bit read
• spi_write · SPI synchronous write
• spi_write_then_read · SPI synchronous write followed by read
• spindle · Control a spindle with different acceleration and deceleration and optional gear change scaling
• spindle_monitor · spindle at-speed and underspeed detection
• spl · manipulate interrupt priorities
• spl0 · manipulate interrupt priorities
• splbio · manipulate interrupt priorities
• splclock · manipulate interrupt priorities
• splhigh · manipulate interrupt priorities
• splice_direct_to_actor · splices data directly between two non-pipes
• splice_from_pipe · splice data from a pipe to a file
• splice_from_pipe_begin · start splicing from pipe
• splice_from_pipe_end · finish splicing from pipe
• splice_from_pipe_feed · feed available data from a pipe to a file
• splice_from_pipe_next · wait for some data to splice from
• splice_to_pipe · fill passed data into a pipe
• splimp · manipulate interrupt priorities
• splnet · manipulate interrupt priorities
• splsoftclock · manipulate interrupt priorities
• splsofttty · manipulate interrupt priorities
• splstatclock · manipulate interrupt priorities
• spltty · manipulate interrupt priorities
• splvm · manipulate interrupt priorities
• splx · manipulate interrupt priorities
• sppp_attach · attach synchronous PPP/HDLC to a device
• sppp_close · close down a synchronous PPP or Cisco HDLC link
• sppp_detach · release PPP resources from a device
• sppp_do_ioctl · Ioctl handler for ppp/hdlc
• sppp_open · open a synchronous PPP or Cisco HDLC link
• sppp_reopen · notify of physical link loss
• sprintf · Format a string and place it in a buffer
• sq_flush_range · Flush (prefetch) a specific SQ range
• sq_remap · Map a physical address through the Store Queues
• sq_unmap · Unmap a Store Queue allocation
• srandom · supply pseudo-random numbers
• srcu_barrier · Wait until all in-flight call_srcu callbacks complete.
• srcu_batches_completed · return batches completed.
• srp_attach_transport · instantiate SRP transport template
• srp_reconnect_rport · reconnect to an SRP target port
• srp_release_transport · release SRP transport template instance
• srp_remove_host · tear down a Scsi_Host's SRP data structures
• srp_rport_add · add a SRP remote port to the device hierarchy
• srp_rport_del · remove a SRP remote port
• srp_rport_get · increment rport reference count
• srp_rport_put · decrement rport reference count
• srp_start_tl_fail_timers · start the transport layer failure timers
• srp_stop_rport_timers · stop the transport layer recovery timers
• srp_tmo_valid · check timeout combination validity
• sscanf · Unformat a buffer into a list of arguments
• sserial · Smart Serial LinuxCNC HAL driver for the Mesa Electronics HostMot2 Smart-Serial remote cards
• stack · kernel thread stack tracing routines
• stack_copy · kernel thread stack tracing routines
• stack_create · kernel thread stack tracing routines
• stack_destroy · kernel thread stack tracing routines
• stack_print · kernel thread stack tracing routines
• stack_print_ddb · kernel thread stack tracing routines
• stack_print_short · kernel thread stack tracing routines
• stack_print_short_ddb · kernel thread stack tracing routines
• stack_put · kernel thread stack tracing routines
• stack_save · kernel thread stack tracing routines
• stack_sbuf_print · kernel thread stack tracing routines
• stack_sbuf_print_ddb · kernel thread stack tracing routines
• stack_zero · kernel thread stack tracing routines
• starget_for_each_device · helper to walk all devices of a target
• stepgen · software step pulse generation
• steptest · Used by Stepconf to allow testing of acceleration and velocity values for an axis.
• store · store data to user-space
• strcat · Append one NUL-terminated string to another
• strchr · Find the first occurrence of a character in a string
• strchrnul · Find and return a character in a string, or end of string
• strcmp · Compare two strings
• strcpy · Copy a NUL terminated string
• strcspn · Calculate the length of the initial substring of s which does not contain letters in reject
• streamer · stream file data into HAL in real time
• strict_strtol · convert a string to a long strictly
• strict_strtoll · convert a string to a long long strictly
• strict_strtoul · convert a string to an unsigned long strictly
• strict_strtoull · convert a string to an unsigned long long strictly
• strim · Removes leading and trailing whitespace from s.
• strlcat · Append a length-limited, C-string to another
• strlcpy · Copy a C-string into a sized buffer
• strlen · Find the length of a string
• strlen_user · Get the size of a string in user space.
• strncasecmp · Case insensitive, length-limited string comparison
• strncat · Append a length-limited, C-string to another
• strnchr · Find a character in a length limited string
• strncmp · Compare two length-limited strings
• strncpy · Copy a length-limited, C-string
• strncpy_from_user · Copy a NUL terminated string from userspace.
• strnicmp · Case insensitive, length-limited string comparison
• strnlen · Find the length of a length-limited string
• strnlen_user · Get the size of a string in user space.
• strnstr · Find the first substring in a length-limited string
• strpbrk · Find the first occurrence of a set of characters
• strrchr · Find the last occurrence of a character in a string
• strreplace · Replace all occurrences of character in string.
• strscpy · string safe^W truncate copy
• strsep · Split a string into tokens
• strspn · Calculate the length of the initial substring of s which only contain letters in accept
• strstr · Find the first substring in a NUL terminated string
• strstrip · Removes leading and trailing whitespace from s.
• strtobool · convert common user inputs into boolean values
• struct_ablkcipher_alg · asynchronous block cipher definition
• struct_aead_alg · AEAD cipher definition
• struct_aead_request · AEAD request
• struct_ahash_alg · asynchronous message digest definition
• struct_akcipher_alg · generic public key algorithm
• struct_akcipher_request · public key request
• struct_beacon_parameters · beacon parameters
• struct_blkcipher_alg · synchronous block cipher definition
• struct_bss_parameters · BSS parameters
• struct_bus_type · The bus type of the device
• struct_ccw1 · channel command word
• struct_ccw_dev_id · unique identifier for ccw devices
• struct_ccw_device · channel attached device
• struct_ccw_driver · device driver for channel attached devices
• struct_ccwgroup_device · ccw group device
• struct_ccwgroup_driver · driver for ccw group devices
• struct_cfg80211_ap_settings · AP configuration
• struct_cfg80211_assoc_request · (Re)Association request data
• struct_cfg80211_auth_request · Authentication request data
• struct_cfg80211_beacon_data · beacon data
• struct_cfg80211_bss · BSS description
• struct_cfg80211_connect_params · Connection parameters
• struct_cfg80211_crypto_settings · Crypto settings
• struct_cfg80211_deauth_request · Deauthentication request data
• struct_cfg80211_disassoc_request · Disassociation request data
• struct_cfg80211_ibss_params · IBSS parameters
• struct_cfg80211_ops · backend description for wireless configuration
• struct_cfg80211_pmksa · PMK Security Association
• struct_cfg80211_scan_request · scan request description
• struct_cfg80211_ssid · SSID description
• struct_cipher_alg · single-block symmetric ciphers definition
• struct_ciw · command information word (CIW) layout
• struct_class · device classes
• struct_clk_notifier · associate a clk with a notifier
• struct_clk_notifier_data · rate data to pass to the notifier callback
• struct_cmbdata · channel measurement block data for user space
• struct_cputime · snaphsot of system and user cputime
• struct_crypto_alg · definition of a cryptograpic cipher algorithm
• struct_debug_obj · representaion of an tracked object
• struct_debug_obj_descr · object type specific debug description structure
• struct_device · The basic device structure
• struct_device_driver · The basic device driver structure
• struct_drm_dp_aux · DisplayPort AUX channel
• struct_drm_dp_aux_msg · DisplayPort AUX channel transaction
• struct_drm_fb_helper_funcs · driver callbacks for the fbdev emulation library
• struct_drm_flip_work · flip work queue
• struct_drm_rect · two dimensional rectangle
• struct_erw · extended report word
• struct_erw_eadm · EADM Subchannel extended report word
• struct_esw0 · Format 0 Extended Status Word (ESW)
• struct_esw1 · Format 1 Extended Status Word (ESW)
• struct_esw2 · Format 2 Extended Status Word (ESW)
• struct_esw3 · Format 3 Extended Status Word (ESW)
• struct_esw_eadm · EADM Subchannel Extended Status Word (ESW)
• struct_export_operations · for nfsd to communicate with file systems
• struct_ff_condition_effect · defines a spring or friction force-feedback effect
• struct_ff_constant_effect · defines parameters of a constant force-feedback effect
• struct_ff_device · force-feedback part of an input device
• struct_ff_effect · defines force feedback effect
• struct_ff_envelope · generic force-feedback effect envelope
• struct_ff_periodic_effect · defines parameters of a periodic force-feedback effect
• struct_ff_ramp_effect · defines parameters of a ramp force-feedback effect
• struct_ff_replay · defines scheduling of the force-feedback effect
• struct_ff_rumble_effect · defines parameters of a periodic force-feedback effect
• struct_ff_trigger · defines what triggers the force-feedback effect
• struct_futex_q · The hashed futex queue entry, one per waiting task
• struct_gnet_estimator · rate estimator configuration
• struct_gnet_stats_basic · byte/packet throughput statistics
• struct_gnet_stats_queue · queuing statistics
• struct_gnet_stats_rate_est · rate estimator
• struct_gnet_stats_rate_est64 · rate estimator
• struct_handle_s · this is the concrete type associated with handle_t.
• struct_hash_alg_common · define properties of message digest
• struct_hrtimer · the basic hrtimer structure
• struct_hrtimer_base · the timer base for a specific clock
• struct_hrtimer_clock_base · the timer base for a specific clock
• struct_hrtimer_sleeper · simple sleeper structure
• struct_hsi_board_info · HSI client board info
• struct_hsi_channel · channel resource used by the hsi clients
• struct_hsi_client · HSI client attached to an HSI port
• struct_hsi_client_driver · Driver associated to an HSI client
• struct_hsi_config · Configuration for RX/TX HSI modules
• struct_hsi_controller · HSI controller device
• struct_hsi_msg · HSI message descriptor
• struct_hsi_port · HSI port device
• struct_i2c_algo_dp_aux_data · driver interface structure for i2c over dp aux algorithm
• struct_i2c_algorithm · represent I2C transfer method
• struct_i2c_board_info · template for device creation
• struct_i2c_bus_recovery_info · I2C bus recovery information
• struct_i2c_client · represent an I2C slave device
• struct_i2c_driver · represent an I2C device driver
• struct_i2c_msg · an I2C transaction segment beginning with START
• struct_ieee80211_channel · channel definition
• struct_ieee80211_conf · configuration of the device
• struct_ieee80211_hw · hardware information and state
• struct_ieee80211_if_conf · configuration of an interface
• struct_ieee80211_if_init_conf · initial configuration of an interface
• struct_ieee80211_iface_combination · possible interface combination
• struct_ieee80211_iface_limit · limit on certain interface types
• struct_ieee80211_key_conf · key information
• struct_ieee80211_ops · callbacks from mac80211 to the driver
• struct_ieee80211_radiotap_iterator · tracks walk thru present radiotap args
• struct_ieee80211_rate · bitrate definition
• struct_ieee80211_rx_status · receive status
• struct_ieee80211_sta · station table entry
• struct_ieee80211_sta_ht_cap · STA's HT capabilities
• struct_ieee80211_supported_band · frequency band definition
• struct_ieee80211_tpt_blink · throughput blink description
• struct_ieee80211_tx_info · skb transmit information
• struct_ieee80211_tx_queue_params · transmit queue configuration
• struct_ieee80211_tx_queue_stats · transmit queue statistics
• struct_ieee80211_tx_queue_stats_data · transmit queue statistics
• struct_ieee80211_tx_rate · rate selection/status
• struct_ieee80211_tx_rate_control · rate control information for/from RC algo
• struct_ieee80211_tx_status · transmit status
• struct_ieee80211_txq_params · TX queue parameters
• struct_ieee80211_vif · per-interface data
• struct_iio_buffer · general buffer structure
• struct_iio_buffer_setup_ops · buffer setup related callbacks
• struct_iio_chan_spec · specification of a single channel
• struct_iio_dev · industrial I/O device
• struct_iio_trigger · industrial I/O trigger device
• struct_iio_trigger_ops · operations structure for an iio_trigger.
• struct_input_absinfo · used by EVIOCGABS/EVIOCSABS ioctls
• struct_input_dev · represents an input device
• struct_input_handle · links input device with an input handler
• struct_input_handler · implements one of interfaces for input devices
• struct_input_keymap_entry · used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
• struct_input_mt · state of tracked contacts
• struct_input_mt_pos · contact position
• struct_input_mt_slot · represents the state of an input MT slot
• struct_input_polled_dev · simple polled input device
• struct_input_value · input value representation
• struct_irb · interruption response block
• struct_irq_affinity_notify · context for notification of IRQ affinity changes
• struct_irq_chip · hardware interrupt chip descriptor
• struct_irq_chip_generic · Generic irq chip data structure
• struct_irq_chip_regs · register offsets for struct irq_gci
• struct_irq_chip_type · Generic interrupt chip instance for a flow type
• struct_irq_common_data · per irq data shared by all irqchips
• struct_irq_data · per irq chip data passed down to chip functions
• struct_irq_desc · interrupt descriptor
• struct_irqaction · per interrupt action descriptor
• struct_jbd2_inode · The jbd_inode type is the structure linking inodes in ordered mode present in a transaction so that we can sync them during commit.
• struct_jbd2_journal_handle · The handle_s type is the concrete type associated with handle_t.
• struct_journal_s · The journal_s type is the concrete type associated with journal_t.
• struct_key_entry · keymap entry for use in sparse keymap
• struct_key_params · key information
• struct_kgdb_arch · Describe architecture specific values.
• struct_kgdb_io · Describe the interface for an I/O driver to talk with KGDB.
• struct_matrix_keymap_data · keymap for matrix keyboards
• struct_matrix_keypad_platform_data · platform-dependent keypad data
• struct_mpath_info · mesh path information
• struct_nand_bbt_descr · bad block table descriptor
• struct_nand_buffers · buffer structure for read/write
• struct_nand_chip · NAND Private Flash Chip Data
• struct_nand_data_interface · NAND interface timing
• struct_nand_ecc_ctrl · Control structure for ECC
• struct_nand_flash_dev · NAND Flash Device ID Structure
• struct_nand_hw_control · Control structure for hardware controller (e.g ECC generator) shared among independent devices
• struct_nand_manufacturers · NAND Flash Manufacturer ID Structure
• struct_nand_sdr_timings · SDR NAND chip timings
• struct_net_device · The DEVICE structure. Actually, this whole structure is a big mistake. It mixes I/O data with strictly “high-level” data, and it has to know about almost every data structure used in the INET module.
• struct_pipe_buffer · a linux kernel pipe buffer
• struct_pipe_inode_info · a linux kernel pipe
• struct_platform_nand_chip · chip level device structure
• struct_platform_nand_ctrl · controller level device structure
• struct_platform_nand_data · container structure for platform-specific data
• struct_pre_voltage_change_data · Data sent with PRE_VOLTAGE_CHANGE event
• struct_rate_info · bitrate information
• struct_regulation_constraints · regulator operating constraints.
• struct_regulator_bulk_data · Data used for bulk regulator operations.
• struct_regulator_config · Dynamic regulator descriptor
• struct_regulator_consumer_supply · supply -> device mapping
• struct_regulator_desc · Static regulator descriptor
• struct_regulator_init_data · regulator platform initialisation data.
• struct_regulator_linear_range · specify linear voltage ranges
• struct_regulator_ops · regulator operations.
• struct_regulator_state · regulator state during low power system states
• struct_rio_dbell · RIO doorbell event
• struct_rio_dev · RIO device info
• struct_rio_device_id · RIO device identifier
• struct_rio_driver · RIO driver info
• struct_rio_mport · RIO master port info
• struct_rio_mport_attr · RIO mport device attributes
• struct_rio_msg · RIO message event
• struct_rio_net · RIO network info
• struct_rio_ops · Low-level RIO configuration space operations
• struct_rio_route_ops · Per-switch route operations
• struct_rio_scan · RIO enumeration and discovery operations
• struct_rio_scan_node · list node to register RapidIO enumeration and discovery methods with RapidIO core.
• struct_rio_switch · RIO switch info
• struct_rio_switch_ops · Per-switch operations
• struct_rng_alg · random number generator definition
• struct_rs_control · rs control structure
• struct_scsw · subchannel status word
• struct_shash_alg · synchronous message digest definition
• struct_sk_buff · socket buffer
• struct_skb_mstamp · multi resolution time stamps
• struct_skb_shared_hwtstamps · hardware time stamps
• struct_skb_shared_tx · instructions for time stamping of outgoing packets
• struct_snd_compr
• struct_snd_compr_avail · avail descriptor
• struct_snd_compr_caps · caps descriptor
• struct_snd_compr_codec_caps · query capability of codec
• struct_snd_compr_metadata · compressed stream metadata
• struct_snd_compr_ops
• struct_snd_compr_params · compressed stream params
• struct_snd_compr_runtime
• struct_snd_compr_stream
• struct_snd_compr_tstamp · timestamp descriptor
• struct_snd_compressed_buffer · compressed buffer
• struct_snd_dmaengine_dai_dma_data · DAI DMA configuration data
• struct_snd_dmaengine_pcm_config · Configuration data for dmaengine based PCM
• struct_snd_enc_flac
• struct_snd_enc_real
• struct_snd_enc_vorbis
• struct_snd_soc_jack_gpio · Describes a gpio pin for jack detection
• struct_snd_soc_jack_pin · Describes a pin to update based on jack detection
• struct_snd_soc_jack_zone · Describes voltage zones of jack detection
• struct_sock · network layer representation of sockets
• struct_sock_common · minimal network layer representation of sockets
• struct_socket · general BSD socket
• struct_spi_board_info · board-specific template for a SPI device
• struct_spi_device · Master side proxy for an SPI slave device
• struct_spi_driver · Host side “protocol” driver
• struct_spi_master · interface to SPI master controller
• struct_spi_message · one multi-segment SPI transaction
• struct_spi_transfer · a read/write buffer pair
• struct_sta_ampdu_mlme · STA aggregation information.
• struct_sta_info · STA information
• struct_station_info · station information
• struct_station_parameters · station parameters
• struct_sublog · subchannel logout area
• struct_subsys_interface · interfaces to device functions
• struct_survey_info · channel survey response
• struct_task_cputime · collected CPU time counts
• struct_thread_group_cputimer · thread group interval timer counts
• struct_tid_ampdu_rx · TID aggregation information (Rx).
• struct_tid_ampdu_tx · TID aggregation information (Tx).
• struct_uio_info · UIO device capabilities
• struct_uio_mem · description of a UIO memory region
• struct_uio_port · description of a UIO port region
• struct_urb · USB Request Block
• struct_usb_class_driver · identifies a USB driver that wants to use the USB major number
• struct_usb_composite_dev · represents one composite usb gadget
• struct_usb_composite_driver · groups configurations into a gadget
• struct_usb_configuration · represents one gadget configuration
• struct_usb_ctrlrequest · SETUP data for a USB device control request
• struct_usb_device · kernel's representation of a USB device
• struct_usb_device_driver · identifies USB device driver to usbcore
• struct_usb_driver · identifies USB interface driver to usbcore
• struct_usb_ep · device side representation of USB endpoint
• struct_usb_ep_caps · endpoint capabilities description
• struct_usb_function · describes one function of a configuration
• struct_usb_gadget · represents a usb slave device
• struct_usb_gadget_driver · driver for usb 'slave' devices
• struct_usb_gadget_strings · a set of USB strings in a given language
• struct_usb_host_config · representation of a device's configuration
• struct_usb_host_endpoint · host-side endpoint descriptor and queue
• struct_usb_host_ss_ep_comp · Valid for SuperSpeed devices only
• struct_usb_interface · what usb device drivers talk to
• struct_usb_interface_cache · long-term representation of a device interface
• struct_usb_os_desc · describes OS descriptors associated with one interface
• struct_usb_os_desc_ext_prop · describes one “Extended Property”
• struct_usb_os_desc_table · describes OS descriptors associated with one interface of a usb_function
• struct_usb_request · describes one i/o request
• struct_usb_sg_request · support for scatter/gather I/O
• struct_usb_string · wraps a C string and its USB id
• struct_usbdrv_wrap · wrapper for driver-model structure
• struct_vif_params · describes virtual interface parameters
• struct_w1_async_cmd · execute callback from the w1_process kthread
• struct_w1_bus_master · operations available on a bus master
• struct_w1_family · reference counted family structure.
• struct_w1_family_ops · operations for a family type
• struct_w1_master · one per bus master
• struct_w1_netlink_cmd · holds the command and data
• struct_w1_netlink_msg · holds w1 message type, id, and result
• struct_w1_reg_num · broken out slave device id
• struct_w1_slave · holds a single slave device on the bus
• struct_wimax_dev · Generic WiMAX device
• struct_wiphy · wireless hardware description
• struct_wireless_dev · wireless device state
• style · kernel source file style guide
• style.lua · FreeBSD lua file style guide
• submit_bio · submit a bio to the block device layer for I/O
• submit_bio_wait · submit a bio, and wait until it completes
• subsys_create_file · export sysfs attribute file.
• subsys_dev_iter_exit · finish iteration
• subsys_dev_iter_init · initialize subsys device iterator
• subsys_dev_iter_next · iterate to the next device
• subsys_find_device_by_id · find a device with a specific enumeration number
• subsys_system_register · register a subsystem at /sys/devices/system/
• subsys_virtual_register · register a subsystem at /sys/devices/virtual/
• subsystem_register · register a subsystem.
• subyte · store data to user-space
• suibyte · store data to user-space
• suiword · store data to user-space
• sulong · store data to user-space
• sum2 · Sum of two inputs (each with a gain) and an offset
• superhyway_add_device · Add a SuperHyway module
• superhyway_register_driver · Register a new SuperHyway driver
• superhyway_unregister_driver · Unregister a SuperHyway driver
• superio · Super I/O bus interface
• superio_dev_disable · Super I/O bus interface
• superio_dev_enable · Super I/O bus interface
• superio_dev_enabled · Super I/O bus interface
• superio_devid · Super I/O bus interface
• superio_find_dev · Super I/O bus interface
• superio_get_dma · Super I/O bus interface
• superio_get_iobase · Super I/O bus interface
• superio_get_irq · Super I/O bus interface
• superio_get_ldn · Super I/O bus interface
• superio_get_type · Super I/O bus interface
• superio_read · Super I/O bus interface
• superio_revid · Super I/O bus interface
• superio_vendor · Super I/O bus interface
• superio_write · Super I/O bus interface
• supply · set output pins with values from parameters (obsolete)
• suptr · store data to user-space
• suser · check if credentials have superuser privilege
• suser_cred · check if credentials have superuser privilege
• suswintr · store data to user-space
• susword · store data to user-space
• suulong · store data to user-space
• suword · store data to user-space
• suword16 · store data to user-space
• suword32 · store data to user-space
• suword64 · store data to user-space
• svc_find_xprt · find an RPC transport instance
• svc_makesock · Make a socket for nfsd and lockd
• svc_print_addr · Format rq_addr field for printing
• svc_reserve · change the space reserved for the reply to a request.
• svc_xprt_names · format a buffer with a list of transport names
• swap_buf_le16 · swap halves of 16-bit words in place
• swi · register and schedule software interrupt handlers
• swi_add · register and schedule software interrupt handlers
• swi_remove · register and schedule software interrupt handlers
• swi_sched · register and schedule software interrupt handlers
• sx · kernel shared/exclusive lock
• sx_assert · kernel shared/exclusive lock
• sx_destroy · kernel shared/exclusive lock
• sx_downgrade · kernel shared/exclusive lock
• sx_init · kernel shared/exclusive lock
• sx_init_flags · kernel shared/exclusive lock
• sx_sleep · kernel shared/exclusive lock
• sx_slock · kernel shared/exclusive lock
• sx_slock_sig · kernel shared/exclusive lock
• sx_sunlock · kernel shared/exclusive lock
• SX_SYSINIT · kernel shared/exclusive lock
• SX_SYSINIT_FLAGS · kernel shared/exclusive lock
• sx_try_slock · kernel shared/exclusive lock
• sx_try_upgrade · kernel shared/exclusive lock
• sx_try_xlock · kernel shared/exclusive lock
• sx_unlock · kernel shared/exclusive lock
• sx_xholder · kernel shared/exclusive lock
• sx_xlock · kernel shared/exclusive lock
• sx_xlock_sig · kernel shared/exclusive lock
• sx_xlocked · kernel shared/exclusive lock
• sx_xunlock · kernel shared/exclusive lock
• sync_inode · write an inode and its pages to disk.
• sync_inode_metadata · write an inode to disk
• sync_inodes_sb · sync sb inode pages
• sync_mapping_buffers · write out & wait upon a mapping's “associated” buffers
• sync_page_range · write and wait on all pages in the passed range
• sync_page_range_nolock · write & wait on all pages in the passed range without locking
• synchronize_hardirq · wait for pending hard IRQ handlers (on other CPUs)
• synchronize_irq · wait for pending IRQ handlers (on other CPUs)
• synchronize_net · Synchronize with packet receive processing
• synchronize_rcu · wait until a grace period has elapsed.
• synchronize_rcu_bh · wait until an rcu_bh grace period has elapsed.
• synchronize_rcu_expedited · Brute-force RCU grace period
• synchronize_sched · wait until an rcu-sched grace period has elapsed.
• synchronize_sched_expedited · Brute-force RCU-sched grace period
• synchronize_srcu · wait for prior SRCU read-side critical-section completion
• synchronize_srcu_expedited · Brute-force SRCU grace period
• sys_acct · enable/disable process accounting
• sys_flock · flock system call.
• sys_get_robust_list · Get the robust-futex list head of a task
• sys_kill · send a signal to a process
• sys_restart_syscall · restart a system call
• sys_rt_sigaction · alter an action taken by a process
• sys_rt_sigpending · examine a pending signal that has been raised while blocked
• sys_rt_sigprocmask · change the list of currently blocked signals
• sys_rt_sigqueueinfo · send signal information to a signal
• sys_rt_sigsuspend · replace the signal mask for a value with the unewset value until a signal is received
• sys_rt_sigtimedwait · synchronously wait for queued signals specified in uthese
• sys_set_robust_list · Set the robust-futex list head of a task
• sys_sigpending · examine pending signals
• sys_sigprocmask · examine and change blocked signals
• sys_tgkill · send signal to one specific thread
• sys_tkill · send signal to one specific task