Section 9

• g_access · control access to GEOM consumers and their providers
• g_alloc_bio · GEOM bio controlling functions
• g_attach · attach/detach GEOM consumers to/from providers
• g_bio · GEOM bio controlling functions
• g_cancel_event · GEOM events management
• g_clone_bio · GEOM bio controlling functions
• g_consumer · GEOM consumers management
• g_data · read/write data from/to GEOM consumer
• g_destroy_bio · GEOM bio controlling functions
• g_destroy_consumer · GEOM consumers management
• g_destroy_geom · geom management
• g_destroy_provider · GEOM providers management
• g_detach · attach/detach GEOM consumers to/from providers
• g_duplicate_bio · GEOM bio controlling functions
• g_error_provider · GEOM providers management
• g_event · GEOM events management
• g_format_bio · GEOM bio controlling functions
• g_geom · geom management
• g_new_bio · GEOM bio controlling functions
• g_new_consumer · GEOM consumers management
• g_new_geomf · geom management
• g_new_providerf · GEOM providers management
• g_post_event · GEOM events management
• g_print_bio · GEOM bio controlling functions
• g_provider · GEOM providers management
• g_provider_by_name · find GEOM provider with given name
• g_read_data · read/write data from/to GEOM consumer
• g_reset_bio · GEOM bio controlling functions
• g_waitfor_event · GEOM events management
• g_wither_geom · destroy geom and related providers and consumers when you get a chance
• g_write_data · read/write data from/to GEOM consumer
• gadget
• gadget_avoids_skb_reserve · return true iff the hardware would like to avoid skb_reserve to improve performance.
• gadget_is_altset_supported · return true iff the hardware supports altsettings
• gadget_is_dualspeed · return true iff the hardware handles high speed
• gadget_is_otg · return true iff the hardware is OTG-ready
• gadget_is_stall_supported · return true iff the hardware supports stalling
• gadget_is_superspeed · return true if the hardware handles superspeed
• gadget_is_superspeed_plus · return true if the hardware handles superspeed plus
• gadget_is_zlp_supported · return true iff the hardware supports zlp
• gantry · LinuxCNC HAL component for driving multiple joints from a single axis.
• gantrykins · Superseded by the general purpose trivkins kinematics module. To specify a gantry with non-identity kinematics: use trivkins with the kinstype parameter set for KINEMATICS_BOTH. Example: loadrt trivkins coordinates=xyyz kinstypes=BOTH
• gdb_regs_to_pt_regs · Convert GDB regs to ptrace regs.
• gearchange · Select from one two speed ranges
• gen_estimator_active · test if estimator is currently in use
• gen_kill_estimator · remove a rate estimator
• gen_new_estimator · create a new rate estimator
• gen_replace_estimator · replace rate estimator configuration
• generic_detach_inode · remove inode from inode lists
• generic_file_aio_read · generic filesystem read routine
• generic_file_aio_write · write data to a file
• generic_file_read_iter · generic filesystem read routine
• generic_file_splice_read · splice data from file to a pipe
• generic_file_splice_write · splice data from a pipe to a file
• generic_file_splice_write_nolock · generic_file_splice_write without mutexes
• generic_file_write_iter · write data to a file
• generic_make_request · hand a buffer to its device driver for I/O
• generic_osync_inode · flush all dirty data for a given inode to disk
• generic_permission · check for access rights on a Posix-like filesystem
• generic_pipe_buf_confirm · verify contents of the pipe buffer
• generic_pipe_buf_get · get a reference to a struct pipe_buffer
• generic_pipe_buf_map · virtually map a pipe buffer
• generic_pipe_buf_release · put a reference to a struct pipe_buffer
• generic_pipe_buf_steal · attempt to take ownership of a pipe_buffer
• generic_pipe_buf_unmap · unmap a previously mapped pipe buffer
• generic_setlease · sets a lease on an open file
• generic_shutdown_super · common helper for ->kill_sb
• generic_splice_sendpage · splice data from a pipe to a socket
• generic_unplug_device · fire a request queue
• generic_writepages · walk the list of dirty pages of the given address space and writepage all of them.
• genericirq
• genhexkins · kinematics definitions for LinuxCNC For additional information, see the Documents 'Advanced Topics': Kinematics 5-Axis Kinematics Switchable Kinematics
• genphy_aneg_done · return auto-negotiation status
• genphy_config_advert · sanitize and advertise auto-negotiation parameters
• genphy_config_aneg · restart auto-negotiation or write BMCR
• genphy_config_eee_advert · disable unwanted eee mode advertisement
• genphy_read_status · check the link status and update current link state
• genphy_restart_aneg · Enable and Restart Autonegotiation
• genphy_setup_forced · configures/forces speed/duplex from phydev
• genphy_soft_reset · software reset the PHY via BMCR_RESET bit
• genphy_update_link · update link status in phydev
• genserkins · kinematics definitions for LinuxCNC For additional information, see the Documents 'Advanced Topics': Kinematics 5-Axis Kinematics Switchable Kinematics
• gentrivkins · Superseded by the general purpose trivkins kinematics module.
• get_bbt_block · Get the first valid eraseblock suitable to store a BBT
• get_ccwdev_by_busid · obtain device from a bus id
• get_ccwdev_by_dev_id · obtain device from a ccw device id
• get_cyclecount · get the CPU's fast counter register contents
• get_device · increment reference count for device.
• get_driver · increment driver reference count.
• get_futex_key · Get parameters which are the keys for a futex
• get_gendisk · get partitioning information for a given device
• get_locks_status · reports lock usage in /proc/locks
• get_option · Parse integer from an option string
• get_options · Parse a string into a list of integers
• get_pageblock_flags_group · Return the requested group of flags for the pageblock_nr_pages block of pages
• get_pfn_range_for_nid · Return the start and end page frames for a node
• get_pfnblock_flags_mask · Return the requested group of flags for the pageblock_nr_pages block of pages
• get_phy_c45_ids · reads the specified addr for its 802.3-c45 IDs.
• get_phy_device · reads the specified PHY device and returns its phy_device struct
• get_phy_id · reads the specified addr for its ID.
• get_request · get a free request
• get_request_wait · get a free request with retry
• get_sd_load_idx · Obtain the load index for a given sched domain.
• get_state_synchronize_rcu · Snapshot current RCU state
• get_super · get the superblock of a device
• get_super_thawed · get thawed superblock of a device
• get_unaligned · get value from possibly mis-aligned location
• get_user · Get a simple variable from user space.
• get_user_pages · pin user pages in memory
• get_user_pages_fast · pin user pages in memory
• getbintime · get the current time
• getbinuptime · get the time elapsed since boot
• getenv · kernel environment variable functions
• getenv_bool · kernel environment variable functions
• getenv_int · kernel environment variable functions
• getenv_is_false · kernel environment variable functions
• getenv_is_true · kernel environment variable functions
• getenv_long · kernel environment variable functions
• getenv_quad · kernel environment variable functions
• getenv_string · kernel environment variable functions
• getenv_uint · kernel environment variable functions
• getenv_ulong · kernel environment variable functions
• geth_bind_config · add CDC Subset network link to a configuration
• GetIocFacts · Send IOCFacts request to MPT adapter.
• GetIoUnitPage2 · Retrieve BIOS version and boot order information.
• GetLanConfigPages · Fetch LANConfig pages.
• getmicrotime · get the current time
• getmicrouptime · get the time elapsed since boot
• getnanotime · get the current time
• getnanouptime · get the time elapsed since boot
• getnewvnode · get a new vnode
• getnstimeofday · Returns the time of day in a timespec
• getpbuf · functions for managing physical buffers
• GetPortFacts · Send PortFacts request to MPT adapter.
• getsbinuptime · get the time elapsed since boot
• gladevcp · displays Virtual control Panels built with GTK / GLADE
• glob_match · match a text string against a glob-style pattern
• gnet_stats_copy_app · copy application specific statistics into statistics TLV
• gnet_stats_copy_basic · copy basic statistics into statistic TLV
• gnet_stats_copy_queue · copy queue statistics into statistics TLV
• gnet_stats_copy_rate_est · copy rate estimator statistics into statistics TLV
• gnet_stats_finish_copy · finish dumping procedure
• gnet_stats_start_copy · start dumping procedure in compatibility mode
• gnet_stats_start_copy_compat · start dumping procedure in compatibility mode
• gone_in · deprecation notice functions
• gone_in_dev · deprecation notice functions
• grab_cache_page_nowait · returns locked page at given index in given cache
• gray2bin · convert a gray-code input to binary
• groupmember · checks group set for a group ID
• gser_bind_config · add a generic serial function to a configuration
• gsignal · post signal to a process or process group