NAME
scan - a program to produce channel.conf files.
SYNOPSIS
scan [options]
DESCRIPTION
This manual page documents briefly the scan commands.
scan is a program to produce channels.conf files.
OPTIONS
- -c [initial-tuning-data-file]
-
scan on currently tuned transponder only
- -v
-
verbose (repeat for more)
- -q
-
quiet (repeat for less)
- -a N
-
use DVB /dev/dvb/adapterN/
- -f N
-
use DVB /dev/dvb/adapter?/frontendN
- -d N
-
use DVB /dev/dvb/adapter?/demuxN
- -s N
-
use DiSEqC switch position N (DVB-S only)
- -i N
-
spectral inversion setting (0: off, 1: on, 2: auto [default])
- -n
-
evaluate NIT-other for full network scan (slow!)
- -5
-
multiply all filter timeouts by factor 5 for non-DVB-compliant section repitition rates
- -o fmt
-
output format: 'zap' (default), 'vdr' or 'pids' (default with -c)
- -x N
-
Conditional Access, (default -1)
N=0 gets only FTA channels
N=-1 gets all channels
N=xxx sets ca field in vdr output to :xxx:
- -t N
-
Service select, Combined bitfield parameter. 1 = TV, 2 = Radio, 4 = Other, (default 7)
- -p
-
for vdr output format: dump provider name
- -e N
-
VDR version, default 3 for VDR-1.3.x and newer value 2 sets NIT and TID to zero
Vdr version 1.3.x and up implies -p.
- -l
-
lnb-type (DVB-S Only) (use -l help to print types) or
- -l
-
low[,high[,switch]] in Mhz
- -u
-
UK DVB-T Freeview channel numbering for VDR
- -P
-
do not use ATSC PSIP tables for scanning (but only PAT and PMT) (applies for ATSC only)
- -A N
-
check for ATSC 1=Terrestrial [default], 2=Cable or 3=both
- -U
-
Uniquely name unknown services
This manual page was written by Uwe Bugla <[email protected]>.