iflibtxrx(9freebsd)

Interface Manipulation Functions

int

isc_txd_encap(void *sc, if_pkt_into_t pi);

void

isc_txd_flush(void *sc, uint16_t qid, uint32_t _pidx_or_credits_);

int

isc_txd_credits_update(void *sc, uint16_t qid, bool clear);

int

isc_rxd_available(void *sc, uint16_t qsid, uint32_t cidx);

void

isc_rxd_refill(void *sc, uint16_t qsid, uint8_t flid, uint32_t pidx, uint64_t *paddrs, caddr_t *vaddrs, uint16_t count);

void

isc_rxd_flush(void *sc, uint16_t qsid, uint8_t flid, uint32_t pidx);

int

isc_rxd_pkt_get(void *sc, if_rxd_info_t ri);

Global Variables

extern struct if_txrx

The if_pkt_info Structure

The fields of struct if_pkt_info are as follows:

ipi_len

(uint32_t) Denotes the size of packet to be sent on the transmit queue.

ipi_segs

(bus_dma_segment_t *) A pointer to the bus_dma_segment of the device independent transfer queue defined in iflib.

ipi_qsidx

Unique index value assigned sequentially to each transmit queue. Used to reference the currently transmitting queue.

ipi_nsegs

(uint16_t) Number of descriptors to be read into the device dependent transfer descriptors.

ipi_ndescs

(uint16_t) Number of descriptors in use. Calculated by subtracting the old pidx value from the new pidx value.

ipi_flags

(uint16_t) Flags defined on a per packet basis.

ipi_pidx

(uint32_t) Value of first pidx sent to the isc_encap function for encapsulation and subsequent transmission.

ipi_new_pidx

(uint32_t) Value set after the termination of the isc_encap function. This value will become the first pidx sent to the isc-encap the next time that the function is called.

The Following Fields Are Used For Offload Handling

ipi_csum_flags

(uint64_t) Flags describing the checksum values, used on a per packet basis.

ipi_tso_segsz

(uint16_t) Size of the TSO Segment Size.

ipi_mflags

(uint16_t) Flags describing the operational parameters of the mbuf.

ipi_vtag

(uint16_t) Contains the VLAN information in the Ethernet Frame.

ipi_etype

(uint16_t) Type of ethernet header protocol as contained by the struct ether_vlan_header.

ipi_ehrdlen

(uint8_t) Length of the Ethernet Header.

ipi_ip_hlen

(uint8_t) Length of the TCP Header

ipi_tcp_hlen

(uint8_t) Length of the TCP Header.

ipi_tcp_hflags

(uint8_t) Flags describing the operational parameters of the TCP Header.

ipi_ipproto

(uint8_t) Specifies the type of IP Protocol in use. Example TCP, UDP, or SCTP.

The if_rxd_info Structure

The fields of struct if_rxd_info are as follows:

iri_qsidx

(uint16_t) Unique index value assigned sequentially to each receive queue. Used to reference the currently receiving queue.

iri_vtag

(uint16_t) Contains the VLAN information in the Ethernet Frame.

iri_len

(uint16_t) Denotes the size of a received packet.

iri_next_offset

(uint16_t) Denotes the offset value for the next packet to be receive. A Null value signifies the end of packet.

iri_cidx

(uint32_t) Denotes the index value of the packet currently being processed in the consumer queue.

iri_flowid

(uint32_t) Value of the RSS hash for the packet.

iri_flags

(uint)
Flags describing the operational parameters of the mbuf contained in the
receive packet.

iri_csum_flags

(uint32_t) Flags describing the checksum value contained in the receive packet.

iri_csum_data

(uint32_t) Checksum data contained in the mbuf(9) packet header.

iri_m

(struct mbuf *) A mbuf for drivers that manage their own receive queues.

iri_ifp

(struct ifnet *) A link back to the interface structure. Utilized by drivers that have multiple interface per softc.

iri_rsstype

(uint8_t) The value of the RSS hash type.

iri_pad

(uint8_t) The length of any padding contained by the received data.

iri_qidx

(uint8_t) Represents the type of queue event. If value >= 0 then it is the freelist id otherwise it is a completion queue event.

Transmit Packet Functions

isc_txd_encap()

Transmit function that sends a packet on an interface. The if_pkt_info data structure contains data information fields describing the packet. This function returns 0 if successful, otherwise an error value is returned.

isc_txd_flush()

Flush function is called immediately after the isc_txd_encap function transmits a packet. It updates the hardware producer index or increments the descriptors used to pidx_or_credits in the queue designated by the qid number. This is often referred to as poking the doorbell register.

isc_txd_credits_update()

Credit function advances the buffer ring and calculates the credits (descriptors) processed. Until the I/O is complete it cleans the range in case of multisegments and updates the count of processed packets. The function returns the number of processed credits.

Receive Packet Functions

isc_rxd_available()

Function calculates the remaining number of descriptors from a position given by idx. The function returns this value.

isc_rxd_refill()

Starting with the physical address paddrs, the function reads a packet into the rx_ring until a value designated by count is reached. vaddrs is typically not needed and is provided for devices that place their own metadata in the packet header.

isc_rxd_flush()

Flush function updates the producer pointer on the free list flid in queue set number qid to pidx to reflect the presence of new buffers.

isc_rxd_pkt_get()

Process a single software descriptor. rxr->rx_base[i] contains a descriptor that describes a received packet. Hardware specific information about the buffer referred to by ri is returned in the data structure if_rxd_info