NAME
bse – Broadcom GENET 10/100/1Gb Ethernet device
SYNOPSIS
bse* at acpi? bse* at fdt? brgphy* at mii?
DESCRIPTION
The bse driver provides support for the Broadcom GENET controller found on the Raspberry Pi4.
The bse driver supports several media types, which are selected via the ifconfig(8) command. The supported media types are:
- media autoselect
-
Attempt to autoselect the media type (default)
- media 1000baseT mediaopt full-duplex
-
Use 1000baseT on copper, full duplex
- media 1000baseT mediaopt half-duplex
-
Use 1000baseT on copper, half duplex
- media 100baseTX mediaopt full-duplex
-
Use 100baseTX, full duplex
- media 100baseTX mediaopt half-duplex
-
Use 100baseTX, half duplex
- media 10baseT mediaopt full-duplex
-
Use 10baseT, full duplex
- media 10baseT mediaopt half-duplex
-
Use 10baseT, half duplex
SEE ALSO
arp(4), brgphy(4), ifmedia(4), inet(4), intro(4), netintro(4), hostname.if(5), ifconfig(8)
HISTORY
The bse driver first appeared in OpenBSD 6.7.
AUTHORS
The bse driver was written by Jared D. McNeill for NetBSD and ported to OpenBSD by Mark Kettenis ⟨[email protected]⟩.