bio(4)

NAME

bio – block I/O ioctl tunnel pseudo-device

SYNOPSIS

pseudo-device bio [count]

DESCRIPTION

The bio driver provides userland applications ioctl(2) access to devices otherwise not found as /dev nodes. The /dev/bio device node operates by delegating ioctl calls to a requested device driver. Only drivers which have registered with the bio device can be accessed via this interface.

If count is given in the specification, and is greater than 0, a maximum of one bio device is created.

The following device drivers register with bio for volume management:

ami(4): American Megatrends Inc. MegaRAID PATA/SATA/SCSI RAID controller
arc(4): Areca Technology Corporation SAS/SATA RAID controller
cac(4): Compaq Smart Array 2/3/4 SCSI RAID controller
ciss(4): Compaq Smart Array SAS/SATA/SCSI RAID controller
gdt(4): ICP-Vortex and Intel GDT SATA/SCSI RAID controller
ips(4): IBM SATA/SCSI ServeRAID controller
mfi(4): LSI Logic & Dell MegaRAID SAS RAID controller
mfii(4): LSI Logic MegaRAID SAS Fusion RAID controller
mpi(4): LSI Logic Fusion-MPT Message Passing Interface
mpii(4): LSI Logic Fusion-MPT Message Passing Interface II
nvme(4): NVMe storage controllers
softraid(4): Software RAID

The following device drivers register with bio to provide enclosure management:

ses(4): SCSI Enclosure Services

The following ioctl calls apply to the bio device:

BIOCLOCATE struct bio_locate *

Locate a named device and give back a cookie to the application for subsequent ioctl calls. The cookie is used to tunnel further ioctls to the right device.

BIOCINQ struct bioc_inq *

Retrieve number of volumes and physical disks for a specific device.

BIOCDISK struct bioc_disk *

Retrieve detailed information for the specified physical disk. Information returned can include status, size, channel, target, lun, vendor name, serial number and processor device (ses).

BIOCVOL struct bioc_vol *

Retrieve detailed information for the specified volume. Information returned can include status, size, RAID level, number of disks, device name association (sd?) and vendor name.

BIOCALARM struct bioc_alarm *

Control the alarm beeper on the device. Supported states are: disable alarm, enable alarm, silence alarm, status and test alarm.

Note: These options might not be supported on all hardware.

BIOCBLINK struct bioc_blink *

Blink an LED of the specified physical disk. Supported blink states are: blink LED, unblink LED and blink alarm LED.

Note: This option is only supported if the disk is governed by ses(4) and the hardware supports hardware blinking.

BIOCSETSTATE struct bioc_setstate *

Alter the state of specified physical disk. Supported states are: create hot-spare, online disk and offline disk.

The following ioctl calls apply to the bio device only when talking to a softraid(4) device:

BIOCCREATERAID struct bioc_createraid *: Create a new volume or assemble an existing volume. The volume will be attached as a system disk, if this capability is supported by the volume discipline.
BIOCDELETERAID struct bioc_deleteraid *: Remove system disk (if present) and disassemble the softraid(4) volume.
BIOCDISCIPLINE struct bioc_discipline *: Dispatch a discipline specific ioctl.
BIOCINSTALLBOOT struct bioc_installboot *: Install a boot loader.

FILES

/dev/bio: ioctl tunnel device

HISTORY

The bio driver first appeared in OpenBSD 3.2.

AUTHORS

The bio driver was written by Niklas Hallqvist ⟨[email protected]⟩. The API was written by Marco Peereboom ⟨[email protected]⟩.