---
name: "zaptel_hardware"
section: "8"
platform: "linux"
package: "zaptel"
version: "1:1.4.11~dfsg-3"
release: "Debian 5.0 (Lenny)"
platforms: ["linux"]
url: "https://new.carta.tech/zaptel_hardware"
---

# zaptel\_hardware(8)

Shows Zaptel hardware devices.

## NAME

zaptel\_hardware - Shows Zaptel hardware devices.

## SYNOPSIS

zaptel\_hardware \[-v\]\[-x\]

## OPTIONS

- \-v

  Verbose ouput - show spans used by each device etc. Currently only  implemented for the Xorcom Astribank.

- \-x

  Show disconnected Astribank unit, if any.

## DESCRIPTION

Show all zaptel hardware devices. Devices are recognized according to lists of PCI and USB IDs in Zaptel::Hardware::PCI.pm and  Zaptel::Hardware::USB.pm . For PCI it is possible to detect by sub-vendor and sub-product ID as well.

The first output column is the connector: a bus specific field that shows where this device is.

The second field shows which driver should handle the device. a "-" sign marks that the device is not yet handled by this driver. A "+" sign means that the device is handled by the driver.

For the Xorcom Astribank (and in the future: for other Zaptel devices) some further information is provided from the driver. Those extra lines always begin with spaces.

Example output:

Without drivers loaded:

```
  usb:001/002        xpp_usb-     e4e4:1152 Astribank-multi FPGA-firmware
  usb:001/003        xpp_usb-     e4e4:1152 Astribank-multi FPGA-firmware
  pci:0000:01:0b.0   wctdm-       e159:0001 Wildcard TDM400P REV H
```

With drivers loaded, without -v:\
   usb:001/002        xpp\_usb+     e4e4:1152 Astribank-multi FPGA-firmware\
   usb:001/003        xpp\_usb+     e4e4:1152 Astribank-multi FPGA-firmware\
   pci:0000:01:0b.0   wctdm+       e159:0001  Wildcard TDM400P REV E/F

With drivers loaded, with -v:\
   usb:001/002        xpp\_usb+     e4e4:1152 Astribank-multi FPGA-firmware\
    LABEL=\[usb:123\] CONNECTOR=usb-0000:00:1d.7-1  \
           XBUS-00/XPD-00: FXS      Span 2 \
           XBUS-00/XPD-10: FXS      Span 3 \
           XBUS-00/XPD-20: FXS      Span 4 \
           XBUS-00/XPD-30: FXS      Span 5 \
   usb:001/003        xpp\_usb+     e4e4:1152 Astribank-multi FPGA-firmware\
    LABEL=\[usb:4567\] CONNECTOR=usb-0000:00:1d.7-4  \
           XBUS-01/XPD-00: FXS      Span 6 XPP-SYNC\
           XBUS-01/XPD-10: FXO      Span 7 \
           XBUS-01/XPD-20: FXO      Span 8 \
           XBUS-01/XPD-30: FXO      Span 9 \
   pci:0000:01:0b.0   wctdm+       e159:0001  Wildcard TDM400P REV E/F