---
name: "xirc2ps_cs"
section: "4"
platform: "linux"
package: "pcmcia-cs"
version: "3.2.8-9"
release: "Debian 4.0 (Etch)"
platforms: ["linux"]
url: "https://new.carta.tech/xirc2ps_cs"
---

# xirc2ps\_cs(4)

Xircom CE2ps (and newer) device driver

## NAME

xirc2ps\_cs - Xircom CE2ps (and newer) device driver

## SYNOPSIS

**insmod xirc2ps\_cs.o** \[**pc\_debug=** *n*\] \[**full\_duplex=** *n*\] \[**irq\_list=** *i,j,...*\] \[**if\_port=** *n*\] \[**lockup\_hack=** *n*\]

## DESCRIPTION

**xirc2ps\_cs** is the low-level Card Services driver for the Xircom 16-bit PCMCIA ethernet adapters.  When this driver is attached to a card, it allocates the next available ethernet device.

## PARAMETERS

- **pc\_debug=***n*

  Selects the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.  A non-zero value enables debugging.

- **if\_port=***n*

  Selects the transceiver type, for some CE3B-100 cards that lack the ability to autonegotiate.  For such cards, a value of 1 selects 10baseT, and 4 selects 100baseT.

- **full\_duplex=***n*

  Selects full duplex mode.  The default is 0 (half duplex).

- **irq\_list=***i,j,...*

  Specifies the set of interrupts that may be allocated by this driver.

- **lockup\_hack=***n*

  Enables a hack to avoid lockups on some cards.	Use this only if you really have lockup problems with your card.

## SEE ALSO

[cardmgr(8)](/cardmgr/8.md), [pcmcia(5)](/pcmcia/5.md).

## BUGS

Please report to \<xircom-bugs@isil.d.shuttle.de\>

## AUTHOR

Werner Koch \<werner.koch@guug.de\>