wmapm1
Dockable apm/battery monitor
Usage
wmapm [-h]
[-display
display]
[-C
CriticalLevel]
[-L
LowLevel]
[-b
BlinkRate]
[-B
BeepVolume]
[-A
T1
T2]
Overview
WMAPM is an APM/Battery Monitor. It is used to visually display and interpret details of APM/Battery status from the system's BIOS via Linux and FreeBSD kernels.
WMAPM is dockable using WindowMaker and AfterStep window-managers; under other window-managers, WMAPM appears as a nicely-sized 64x64 application.
WMAPM provides the following information: battery or AC operation, battery life remaining (both in percentage and bar), time left until battery-depletion (Linux only), charging status, and battery status (high - green, low - yellow, or critical - red) as reported by the the APM BIOS.
Options
-
-h -
Display list of command-line options.
-
-C CriticalPercent -
Set Critical threshold to specified (integer) percent.
-
-L LowPercent -
Set Low threshold to specified (integer) percent.
-
-b BlinkRate -
Set blink rate of red LED to given (float) value.
-
-B BeepVolume -
Make wmapm beep at the specified volume (integer between -100 and 100) when critical level is reached.
- -A Time1 Time2
-
Make wmapm warn all users via wall of Low and Critical status. Time1 and Time2 are times in seconds between updates when in Low and Critical States respectively.
-
-display [display] -
Use the designated X display.
History
- Debian 3.0 (Woody) to Debian 2.2 (Potato): the text shown here
- Debian 2.1 (Slink)
-B since Debian 2.2 (Potato);
-C since Debian 2.2 (Potato);
-L since Debian 2.2 (Potato);
-b since Debian 2.2 (Potato);
-display since Debian 2.2 (Potato).
-d until Debian 2.1 (Slink).