wanconfig8
(un)load sangoma wanpipe router configuration
Usage
wanconfig [-v]
-f
conf_file
wanconfig [-v]
-d
device
wanconfig -?
Overview
wanconfig should called by the /usr/sbin/wanpipe script to (un)load the firmware and configuration of the Sangoma S508/S514 router card. You should not need this command for normal usage of the wanpipe router.
This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.
Options
-
-? -
Show usage message.
-
-v -
Be verbose.
-
-f conf_file -
Initialize the router using
conf_file(normally /etc/wanpipe/wanpipe?.conf).
-
-d device -
Unconfigure
device(which is the device name shown byifconfigor /proc/net/wanrouter).