---
name: "wanconfig"
section: "8"
platform: "linux"
package: "wanpipe"
version: "2.1.1-2.1"
release: "Debian 3.0 (Woody)"
platforms: ["linux"]
url: "https://new.carta.tech/wanconfig"
---

# wanconfig(8)

(un)load Sangoma wanpipe router configuration

## NAME

wanconfig - (un)load Sangoma wanpipe router configuration

## SYNOPSIS

**wanconfig** \[ **-v** \] **-f** conf\_file\
 **wanconfig** \[ **-v** \] **-d** device\
 **wanconfig** **-?**

## DESCRIPTION

wanconfig should called by the /usr/sbin/wanpipe script to (un)load the firmware and configuration of the Sangoma S508/S514 router card.   You should not need this command for normal usage of the wanpipe router.

This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.

## OPTIONS

- *-?*

  Show usage message.

- *-v*

  Be verbose.

- *-f conf\_file*

  Initialize the router using  **conf\_file** (normally /etc/wanpipe/wanpipe?.conf).

- *-d device*

  Unconfigure  **device** (which is the device name shown by **ifconfig** or /proc/net/wanrouter).

## SEE ALSO

**wanpipe**

## AUTHOR

This manual page was written by tony mancill \<tmancill@debian.org\>, for the Debian GNU/Linux system (but may be used by others).