NAME
wanconfig - (un)load Sangoma wanpipe router configuration
SYNOPSIS
wanconfig [ -v ] -f conf_file
wanconfig [ -v ] -d device
wanconfig -?
DESCRIPTION
wanconfig should called by the /usr/sbin/wanpipe script to (un)load the firmware and configuration of the Sangoma S508/S514 router card. You should not need this command for normal usage of the wanpipe router.
This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.
OPTIONS
- -?
-
Show usage message.
- -v
-
Be verbose.
- -f conf_file
-
Initialize the router using conf_file (normally /etc/wanpipe/wanpipe?.conf).
- -d device
-
Unconfigure device (which is the device name shown by ifconfig or /proc/net/wanrouter).
SEE ALSO
wanpipe
AUTHOR
This manual page was written by tony mancill <[email protected]>, for the Debian GNU/Linux system (but may be used by others).