---
name: "uaputl"
section: "1"
platform: "linux"
package: "uaputl"
version: "1.12-3"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/uaputl"
---

# uaputl(1)

configure Marvell uAP wireless driver

## NAME

uaputl - configure Marvell uAP wireless driver

## SYNOPSIS

**uaputl** \[*options*\] \<*command*\> \[*parameters*\]

## DESCRIPTION

This manual page documents briefly the **uaputl** command, which is used to configure the device driver for Marvell's  uAP wireless interface.

## OPTIONS

- **-d \<debug\_level\>**

  Enable debugging output, level can be 0, 1, or 2.

- **-h, --help**

  Show summary of options and commands.

- **-i \<interface\>**

  Select interface to configure.

- **-v**

  Show version of program.

## COMMANDS

For more information on the usage of each command use:\
         uaputl.exe \<command\> --help

- **sys\_config**

  Set/get uAP's profile

- **sys\_info**

  Display system info

- **sys\_reset**

  Reset uAP

- **bss\_start**

  Start the BSS

- **bss\_stop**

  Stop the BSS

- **sta\_deauth**

  Deauth client

- **sta\_list**

  Display list of clients

- **sys\_cfg\_ap\_mac\_address**

  Set/get uAP mac address

- **sys\_cfg\_ssid**

  Set/get uAP ssid

- **sys\_cfg\_beacon\_period**

  Set/get uAP beacon period

- **sys\_cfg\_dtim\_period**

  Set/get uAP dtim period

- **sys\_cfg\_channel**

  Set/get uAP radio channel

- **sys\_cfg\_scan\_channels**

  Set/get uAP radio channel list

- **sys\_cfg\_rates**

  Set/get uAP rates

- **sys\_cfg\_rates\_ext**

  Set/get uAP rates (extended)

- **sys\_cfg\_tx\_power**

  Set/get uAP tx power

- **sys\_cfg\_bcast\_ssid\_ctl**

  Set/get uAP broadcast ssid

- **sys\_cfg\_preamble\_ctl**

  Get uAP preamble

- **sys\_cfg\_antenna\_ctl**

  Set/get uAP tx/rx antenna

- **sys\_cfg\_rts\_threshold**

  Set/get uAP rts threshold

- **sys\_cfg\_frag\_threshold**

  Set/get uAP frag threshold

- **sys\_cfg\_radio\_ctl**

  Set/get uAP radio on/off

- **sys\_cfg\_tx\_data\_rate**

  Set/get uAP tx rate

- **sys\_cfg\_mcbc\_data\_rate**

  Set/get uAP MCBC rate

- **sys\_cfg\_rsn\_replay\_prot**

  Set/get RSN replay protection

- **sys\_cfg\_pkt\_fwd\_ctl**

  Set/get uAP packet forwarding

- **sys\_cfg\_sta\_ageout\_timer**

  Set/get station ageout timer

- **sys\_cfg\_auth**

  Set/get uAP authentication mode

- **sys\_cfg\_protocol**

  Set/get uAP security protocol

- **sys\_cfg\_wep\_key**

  Set/get uAP wep key

- **sys\_cfg\_cipher**

  Set/get uAP WPA/WPA cipher

- **sys\_cfg\_wpa\_passphrase**

  Set/get uAP WPA or WPA2 passphrase

- **sys\_cfg\_group\_rekey\_timer**

  Set/get uAP group re-key time

- **sys\_cfg\_max\_sta\_num**

  Set/get uAP max station number

- **sys\_cfg\_retry\_limit**

  Set/get uAP retry limit number

- **sys\_cfg\_custom\_ie**

  Set/get custom IE configuration

- **sta\_filter\_table**

  Set/get uAP mac filter

- **regrdwr**

  Read/Write register command

- **memaccess**

  Read/Write to a memory address command

- **rdeeprom**

  Read EEPROM

- **cfg\_data**

  Get/Set configuration file from/to firmware

- **sys\_debug**

  Set/Get debug parameter

- **sys\_cfg\_80211d**

  Set/Get 802.11D info

- **uap\_stats**

  Get uAP stats

- **powermode**

  Set/get uAP power mode

- **coex\_config**

  Set/get uAP BT coex configuration

## SEE ALSO

[**uapevent**(1)](/uapevent/1.md).\

This manual page was written by Bdale Garbee \<bdale@gag.com\>, for the Debian project (and may be used by others).