---
name: "tmd710_tncsetup"
section: "1"
platform: "linux"
package: "tmd710-tncsetup"
version: "1.13.1-3"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/tmd710_tncsetup"
---

# tmd710\_tncsetup(1)

tool to configure the TNC on several Kenwood radios

## NAME

tmd710\_tncsetup - tool to configure the TNC on several Kenwood radios

## SYNOPSIS

**tmd710\_tncsetup** \[*options*\]

## DESCRIPTION

This manual page documents briefly the **tmd710-tncsetup** command.

## OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (\`-'). A summary of options is included below. You must supply at least two arguments: the band (0 for Band A, 1 for Band B) and the serial port

- **-B, --band**

  the frequency band to use (0 for Band A or 1 for Band B)

- **-S, --serialport**

  the serial port to use for communication with the operation panel

- **-b, --baudrate**

  sets the HBAUD parameter (TNC speed, 1200 or 9600 baud)

- **-m, --maxframe**

  sets the MAXFRAME parameter (1-7)

- **-p, --paclen**

  sets the PACLEN parameter (0-255)

- **-d, --txdelay**

  sets the TXDELAY parameter (0-120)

- **-s, --software-flow**

  configure the TNC for software flow-control

- **-h, --hardware-flow**

  configure the TNC for hardware flow-control

- **-c, --callsign**

  configure the callsign

- **-i**

  Initialize TNC (default is into Packet KISS mode) 1 : TNC off 2 : Packet command mode only

- **-V, --version**

  display the version\

## AUTHOR

Written by Francois Marier \<va7gpl@fmarier.org\>

Project Homepage: https://github.com/fmarier/tmd710\_tncsetup