NAME
tmd710_tncsetup - tool to configure the TNC on several Kenwood radios
SYNOPSIS
tmd710_tncsetup [options]
DESCRIPTION
This manual page documents briefly the tmd710-tncsetup command.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. You must supply at least two arguments: the band (0 for Band A, 1 for Band B) and the serial port
- -B, --band
-
the frequency band to use (0 for Band A or 1 for Band B)
- -S, --serialport
-
the serial port to use for communication with the operation panel
- -b, --baudrate
-
sets the HBAUD parameter (TNC speed, 1200 or 9600 baud)
- -m, --maxframe
-
sets the MAXFRAME parameter (1-7)
- -p, --paclen
-
sets the PACLEN parameter (0-255)
- -d, --txdelay
-
sets the TXDELAY parameter (0-120)
- -s, --software-flow
-
configure the TNC for software flow-control
- -h, --hardware-flow
-
configure the TNC for hardware flow-control
- -c, --callsign
-
configure the callsign
- -i
-
Initialize TNC (default is into Packet KISS mode) 1 : TNC off 2 : Packet command mode only
- -V, --version
-
display the version
AUTHOR
Written by Francois Marier <[email protected]>
Project Homepage: https://github.com/fmarier/tmd710_tncsetup