NAME
teensy_loader_cli - load and run programs onto your Teensy micro controller
SYNOPSIS
teensy_loader_cli --mcu MCU [-w] [-r] [-s] [-n] [-b] [-v] [-h] file.hex
DESCRIPTION
The teensy loader cli is a command-line alternative to the graphical teensy loader which is included with Teensyduino. The cli version is preferred by advanced users who want to automate programming, typically from within a Makefile or similar.
OPTIONS
- --mcu
-
Specify which connected Teensy controller to work with (e.g. TEENSY36). To list supported MCUs, use:
teensy_loader_cli --list-mcus
- -w
-
Wait for device to appear
- -r
-
Use hard reboot if device not online.
This option requires another Teensy to be connected, running the rebootor firmware.
- -s
-
Use soft reboot if device not online (Teensy 3.x only)
- -n
-
No reboot after programming
- -b
-
Boot only, do not program
- -v
-
Verbose output
SEE ALSO
http://www.pjrc.com/teensy/loader_cli.html
AUTHOR
teensy_loader_cli was developed by Paul Stoffregen <[email protected]>
This manual page was written for the Debian project by Michael Stapelberg <[email protected]> (but may be used by others).