NAME
ipc - SWUpdate IPC tool
swupdate-ipc sends a specific command to SWUpdate. The following commands are enabled:
AES
send a new aes key to SWUpdate
SETVERSION
sends a range of versions that can be accepted.
GETHAWKBIT
return status of the connection to Hawkbit.
SENDTOHAWKBIT
send data to the Hawkbit Server. A typical use case is acknowledgement for activation by an application or operator after a new software has been installed. The tool can forward the result for the activation to the hawkBit server.
SYSRESTART
send a restart command after a network update
SYNOPSIS
swupdate-ipc <cmd> [option]
Where cmd is one of the listed above.
DESCRIPTION
- aes <key> <ivt>
-
AES key to be used for decryption
- setversion <min> <max> <current>
-
configure the accepted range of versions
- hawkbitcfg
-
configuration for Hawkbit Module
- -h
-
help
- -p
-
allows one to set the polling time (in seconds)
- -e
-
enable suricatta mode
- -d
-
disable suricatta mode
- swupdate-sendtohawkbit <action id> <status> <finished> <execution> <detail 1> <detail 2> ..
-
Send Acknowledge to Hawkbit server after an update if SWUpdate is set to wait for.
- sysrestart
-
Used with SWU handler, allow one to perform a network restart
- -r
-
optionally reboot the target after a successful update
- -w
-
waits for a SWUpdate connection instead of exit with error
- -s <path>
-
path to progress IPC socket
COPYRIGHT
2013-2024, Stefano Babic