--- name: "svmap" section: "1" platform: "linux" package: "sipvicious" version: "0.3.3-2" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/svmap" --- # svmap(1) scanner that searches for SIP devices on a given network ## NAME svmap.py - scanner that searches for SIP devices on a given network ## SYNOPSIS **svmap.py** \[*options*\] *host1 host2 hostrange* ## DESCRIPTION Scans for SIP devices on a given network examples: svmap.py 10.0.0.1-10.0.0.255 172.16.131.1 sipvicious.org/22 10.0.1.1/241.1.1.1-20 1.1.2-20.\* 4.1.\*.\* svmap.py **-s** session1 **--randomize** 10.0.0.1/8 svmap.py **--resume** session1 **-v** svmap.py **-p5060-5062** 10.0.0.3-20 **-m** INVITE ## OPTIONS - **--version** show program's version number and exit - **-h**, **--help** show this help message and exit - **-v**, **--verbose** Increase verbosity - **-q**, **--quiet** Quiet mode - **-p** PORT, **--port**=*PORT* Destination port or port ranges of the SIP device - eg **-p5060**,5061,8000-8100 - **-P** PORT, **--localport**=*PORT* Source port for our packets - **-x** IP, **--externalip**=*IP* IP Address to use as the external ip. Specify this if you have multiple interfaces or if you are behind NAT - **-b** BINDINGIP, **--bindingip**=*BINDINGIP* By default we bind to all interfaces. This option overrides that and binds to the specified ip address - **-t** SELECTTIME, **--timeout**=*SELECTTIME* This option allows you to trottle the speed at which packets are sent. Change this if you're losing packets. For example try 0.5. - **-R**, **--reportback** Send the author an exception traceback. Currently sends the command line parameters and the traceback - **-A**, **--autogetip** Automatically get the current IP address. This is useful when you are not getting any responses back due to SIPVicious not resolving your local IP. - **-s** NAME, **--save**=*NAME* save the session. Has the benefit of allowing you to resume a previous scan and allows you to export scans - **--resume**=*NAME* resume a previous scan - **-c**, **--enablecompact** enable compact mode. Makes packets smaller but possibly less compatible - **--randomscan** Scan random IP addresses - **-i** scan1, **--input**=*scan1* Scan IPs which were found in a previous scan. Pass the session name as the argument - **-I** scan1, **--inputtext**=*scan1* Scan IPs from a text file - use the same syntax as command line but with new lines instead of commas. Pass the file name as the argument - **-m** METHOD, **--method**=*METHOD* Specify the request method - by default this is OPTIONS. - **-d**, **--debug** Print SIP messages received - **--first**=*FIRST* Only send the first given number of messages (i.e. usually used to scan only X IPs) - **-e** EXTENSION, **--extension**=*EXTENSION* Specify an extension - by default this is not set - **--randomize** Randomize scanning instead of scanning consecutive ip addresses - **--srv** Scan the SRV records for SIP on the destination domain name.The targets have to be domain names - example.org domain1.com - **--fromname**=*FROMNAME* Specify a name for the from header in requests - **-6**, **--ipv6** Scan an IPv6 address - SIPvicious SIP scanner searches for SIP devices on a given network. Copyright (C) 2021 Sandro Gauci \ - This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. - This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License along with this program. If not, see \. ## SEE ALSO The full documentation for **svmap.py** can be found on GitHub at \.