--- name: "supervisor" section: "1" platform: "linux" package: "supervisor" version: "4.2.5-3" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/supervisor" --- # supervisor(1) Supervisor Documentation Supervisor is a client/server system that allows its users to monitor and control a number of processes on UNIX-like operating systems. It shares some of the same goals of programs like launchd, daemontools, and runit. Unlike some of these programs, it is not meant to be run as a substitute for init as "process id 1". Instead it is meant to be used to control processes related to a project or a customer, and is meant to start like any other program at boot time. ## NAME supervisor - Supervisor Documentation Supervisor is a client/server system that allows its users to monitor and control a number of processes on UNIX-like operating systems. It shares some of the same goals of programs like launchd, daemontools, and runit. Unlike some of these programs, it is not meant to be run as a substitute for **init** as "process id 1". Instead it is meant to be used to control processes related to a project or a customer, and is meant to start like any other program at boot time. ## NARRATIVE DOCUMENTATION ### Introduction ### Overview Supervisor is a client/server system that allows its users to control a number of processes on UNIX-like operating systems. It was inspired by the following: Convenience It is often inconvenient to need to write **rc.d** scripts for every single process instance. **rc.d** scripts are a great lowest-common-denominator form of process initialization/autostart/management, but they can be painful to write and maintain. Additionally, **rc.d** scripts cannot automatically restart a crashed process and many programs do not restart themselves properly on a crash. Supervisord starts processes as its subprocesses, and can be configured to automatically restart them on a crash. It can also automatically be configured to start processes on its own invocation. Accuracy It's often difficult to get accurate up/down status on processes on UNIX. Pidfiles often lie. Supervisord starts processes as subprocesses, so it always knows the true up/down status of its children and can be queried conveniently for this data. Delegation Users who need to control process state often need only to do that. They don't want or need full-blown shell access to the machine on which the processes are running. Processes which listen on "low" TCP ports often need to be started and restarted as the root user (a UNIX misfeature). It's usually the case that it's perfectly fine to allow "normal" people to stop or restart such a process, but providing them with shell access is often impractical, and providing them with root access or sudo access is often impossible. It's also (rightly) difficult to explain to them why this problem exists. If supervisord is started as root, it is possible to allow "normal" users to control such processes without needing to explain the intricacies of the problem to them. Supervisorctl allows a very limited form of access to the machine, essentially allowing users to see process status and control supervisord-controlled subprocesses by emitting "stop", "start", and "restart" commands from a simple shell or web UI. Process Groups Processes often need to be started and stopped in groups, sometimes even in a "priority order". It's often difficult to explain to people how to do this. Supervisor allows you to assign priorities to processes, and allows user to emit commands via the supervisorctl client like "start all", and "restart all", which starts them in the preassigned priority order. Additionally, processes can be grouped into "process groups" and a set of logically related processes can be stopped and started as a unit. ### Features Simple Supervisor is configured through a simple INI-style config file that’s easy to learn. It provides many per-process options that make your life easier like restarting failed processes and automatic log rotation. Centralized Supervisor provides you with one place to start, stop, and monitor your processes. Processes can be controlled individually or in groups. You can configure Supervisor to provide a local or remote command line and web interface. Efficient Supervisor starts its subprocesses via fork/exec and subprocesses don’t daemonize. The operating system signals Supervisor immediately when a process terminates, unlike some solutions that rely on troublesome PID files and periodic polling to restart failed processes. Extensible Supervisor has a simple event notification protocol that programs written in any language can use to monitor it, and an XML-RPC interface for control. It is also built with extension points that can be leveraged by Python developers. Compatible Supervisor works on just about everything except for Windows. It is tested and supported on Linux, Mac OS X, Solaris, and FreeBSD. It is written entirely in Python, so installation does not require a C compiler. Proven While Supervisor is very actively developed today, it is not new software. Supervisor has been around for years and is already in use on many servers. ### Supervisor Components **supervisord** The server piece of supervisor is named **supervisord**. It is responsible for starting child programs at its own invocation, responding to commands from clients, restarting crashed or exited subprocesseses, logging its subprocess **stdout** and **stderr** output, and generating and handling "events" corresponding to points in subprocess lifetimes. The server process uses a configuration file. This is typically located in **/etc/supervisord.conf**. This configuration file is a "Windows-INI" style config file. It is important to keep this file secure via proper filesystem permissions because it may contain unencrypted usernames and passwords. **supervisorctl** The command-line client piece of the supervisor is named **supervisorctl**. It provides a shell-like interface to the features provided by **supervisord**. From **supervisorctl**, a user can connect to different **supervisord** processes, get status on the subprocesses controlled by, stop and start subprocesses of, and get lists of running processes of a **supervisord**. The command-line client talks to the server across a UNIX domain socket or an internet (TCP) socket. The server can assert that the user of a client should present authentication credentials before it allows him to perform commands. The client process typically uses the same configuration file as the server but any configuration file with a **\[supervisorctl\]** section in it will work. Web Server A (sparse) web user interface with functionality comparable to **supervisorctl** may be accessed via a browser if you start **supervisord** against an internet socket. Visit the server URL (e.g. **http://localhost:9001/**) to view and control process status through the web interface after activating the configuration file's **\[inet\_http\_server\]** section. XML-RPC Interface The same HTTP server which serves the web UI serves up an XML-RPC interface that can be used to interrogate and control supervisor and the programs it runs. See xml\_rpc. ### Platform Requirements Supervisor has been tested and is known to run on Linux (Ubuntu 9.10), Mac OS X (10.4/10.5/10.6), and Solaris (10 for Intel) and FreeBSD 6.1. It will likely work fine on most UNIX systems. Supervisor will *not* run at all under any version of Windows. Supervisor is known to work with Python 2.4 or later but will not work under any version of Python 3. ### Running Supervisor This section makes reference to a **BINDIR** when explaining how to run the **supervisord** and **supervisorctl** commands. This is the "bindir" directory that your Python installation has been configured with. For example, for an installation of Python installed via **./configure** **--prefix=/usr/local/py; make; make install**, **BINDIR** would be **/usr/local/py/bin**. Python interpreters on different platforms use a different **BINDIR**. Look at the output of **setup.py install** if you can't figure out where yours is. ### Adding a Program Before **supervisord** will do anything useful for you, you'll need to add at least one **program** section to its configuration. The **program** section will define a program that is run and managed when you invoke the **supervisord** command. To add a program, you'll need to edit the **supervisord.conf** file. One of the simplest possible programs to run is the UNIX **cat** program. A **program** section that will run **cat** when the **supervisord** process starts up is shown below. ``` [program:foo] command=/bin/cat ``` This stanza may be cut and pasted into the **supervisord.conf** file. This is the simplest possible program configuration, because it only names a command. Program configuration sections have many other configuration options which aren't shown here. See programx\_section for more information. ### Running supervisord To start **supervisord**, run **$BINDIR/supervisord**. The resulting process will daemonize itself and detach from the terminal. It keeps an operations log at **$CWD/supervisor.log** by default. You may start the **supervisord** executable in the foreground by passing the **-n** flag on its command line. This is useful to debug startup problems. **WARNING:** When **supervisord** starts up, it will search for its configuration file in default locations *including the current working* *directory*. If you are security-conscious you will probably want to specify a "-c" argument after the **supervisord** command specifying an absolute path to a configuration file to ensure that someone doesn't trick you into running supervisor from within a directory that contains a rogue **supervisord.conf** file. A warning is emitted when supervisor is started as root without this **-c** argument. To change the set of programs controlled by **supervisord**, edit the **supervisord.conf** file and **kill -HUP** or otherwise restart the **supervisord** process. This file has several example program definitions. The **supervisord** command accepts a number of command-line options. Each of these command line options overrides any equivalent value in the configuration file. ### supervisord Command-Line Options - **-c** *FILE,* **--configuration=***FILE* The path to a **supervisord** configuration file. - **-n, --nodaemon** Run **supervisord** in the foreground. - **-h, --help** Show **supervisord** command help. - **-u** *USER,* **--user=***USER* UNIX username or numeric user id. If **supervisord** is started as the root user, setuid to this user as soon as possible during startup. - **-m** *OCTAL,* **--umask=***OCTAL* Octal number (e.g. 022) representing the umask that should be used by **supervisord** after it starts. - **-d** *PATH,* **--directory=***PATH* When supervisord is run as a daemon, cd to this directory before daemonizing. - **-l** *FILE,* **--logfile=***FILE* Filename path to use as the supervisord activity log. - **-y** *BYTES,* **--logfile\_maxbytes=***BYTES* Max size of the supervisord activity log file before a rotation occurs. The value is suffix-multiplied, e.g "1" is one byte, "1MB" is 1 megabyte, "1GB" is 1 gigabyte. - **-y** *NUM,* **--logfile\_backups=***NUM* Number of backup copies of the supervisord activity log to keep around. Each logfile will be of size **logfile\_maxbytes**. - **-e** *LEVEL,* **--loglevel=***LEVEL* The logging level at which supervisor should write to the activity log. Valid levels are **trace**, **debug**, **info**, **warn**, **error**, and **critical**. - **-j** *FILE,* **--pidfile=***FILE* The filename to which supervisord should write its pid file. - **-i** *STRING,* **--identifier=***STRING* Arbitrary string identifier exposed by various client UIs for this instance of supervisor. - **-q** *PATH,* **--childlogdir=***PATH* A path to a directory (it must already exist) where supervisor will write its **AUTO** -mode child process logs. - **-k, --nocleanup** Prevent **supervisord** from performing cleanup (removal of old **AUTO** process log files) at startup. - **-a** *NUM,* **--minfds=***NUM* The minimum number of file descriptors that must be available to the supervisord process before it will start successfully. - **-t, --strip\_ansi** Strip ANSI escape sequences from all child log process. - **-v, --version** Print the supervisord version number out to stdout and exit. - **--profile\_options=***LIST* Comma-separated options list for profiling. Causes **supervisord** to run under a profiler, and output results based on the options, which is a comma-separated list of the following: **cumulative**, **calls**, **callers**. E.g. **cumulative,callers**. - **--minprocs=***NUM* The minimum number of OS process slots that must be available to the supervisord process before it will start successfully. ### supervisorctl Command-Line Options - **-c, --configuration** Configuration file path (default /etc/supervisord.conf) - **-h, --help** Print usage message and exit - **-i, --interactive** Start an interactive shell after executing commands - **-s,***--serverurl* **URL** URL on which supervisord server is listening (default "*http://localhost:9001*"). - **-u, --username** Username to use for authentication with server - **-p, --password** Password to use for authentication with server - **-r, --history-file** Keep a readline history (if readline is available) *action \[arguments\]* Actions are commands like "tail" or "stop". If -i is specified or no action is specified on the command line, a "shell" interpreting actions typed interactively is started. Use the action "help" to find out about available actions. ### Running supervisorctl To start **supervisorctl**, run **$BINDIR/supervisorctl**. A shell will be presented that will allow you to control the processes that are currently managed by **supervisord**. Type "help" at the prompt to get information about the supported commands. The **supervisorctl** executable may be invoked with "one time" commands when invoked with arguments from a command line. An example: **supervisorctl stop all**. If arguments are present on the command-line, it will prevent the interactive shell from being invoked. Instead, the command will be executed and **supervisorctl** will exit. If **supervisorctl** is invoked in interactive mode against a **supervisord** that requires authentication, you will be asked for authentication credentials. ### Signals The **supervisord** program may be sent signals which cause it to perform certain actions while it's running. You can send any of these signals to the single **supervisord** process id. This process id can be found in the file represented by the **pidfile** parameter in the **\[supervisord\]** section of the configuration file (by default it's **$CWD/supervisord.pid**). ### Signal Handlers **SIGTERM** **supervisord** and all its subprocesses will shut down. This may take several seconds. **SIGINT** **supervisord** and all its subprocesses will shut down. This may take several seconds. **SIGQUIT** **supervisord** and all its subprocesses will shut down. This may take several seconds. **SIGHUP** **supervisord** will stop all processes, reload the configuration from the first config file it finds, and restart all processes. **SIGUSR2** **supervisord** will close and reopen the main activity log and all child log files. ### Runtime Security The developers have done their best to assure that use of a **supervisord** process running as root cannot lead to unintended privilege escalation. But **caveat emptor**. Supervisor is not as paranoid as something like DJ Bernstein's daemontools, inasmuch as **supervisord** allows for arbitrary path specifications in its configuration file to which data may be written. Allowing arbitrary path selections can create vulnerabilities from symlink attacks. Be careful when specifying paths in your configuration. Ensure that the **supervisord** configuration file cannot be read from or written to by unprivileged users and that all files installed by the supervisor package have "sane" file permission protection settings. Additionally, ensure that your **PYTHONPATH** is sane and that all Python standard library files have adequate file permission protections. ### Running supervisord automatically on startup If you are using a distribution-packaged version of Supervisor, it should already be integrated into the service management infrastructure of your distribution. There are user-contributed scripts for various operating systems at: *https://github.com/Supervisor/initscripts* There are some answers at Serverfault in case you get stuck: *How to automatically start supervisord on Linux (Ubuntu)* ### Configuration File The Supervisor configuration file is conventionally named **supervisord.conf**. It is used by both **supervisord** and **supervisorctl**. If either application is started without the **-c** option (the option which is used to tell the application the configuration filename explicitly), the application will look for a file named **supervisord.conf** within the following locations, in the specified order. It will use the first file it finds. - 1\. **$CWD/supervisord.conf** - 2\. **$CWD/etc/supervisord.conf** - 3\. **/etc/supervisord.conf** - 4\. **../etc/supervisord.conf** (Relative to the executable) - 5\. **../supervisord.conf** (Relative to the executable) **NOTE:** Some distributions have packaged Supervisor with their own customizations. These modified versions of Supervisor may load the configuration file from locations other than those described here. Notably, Ubuntu packages have been found that use **/etc/supervisor/supervisord.conf**. ### File Format **supervisord.conf** is a Windows-INI-style (Python ConfigParser) file. It has sections (each denoted by a **\[header\]**) and key / value pairs within the sections. The sections and their allowable values are described below. ### Environment Variables Environment variables that are present in the environment at the time that **supervisord** is started can be used in the configuration file using the Python string expression syntax **%(ENV\_X)s**: ``` [program:example] command=/usr/bin/example --loglevel=%(ENV_LOGLEVEL)s ``` In the example above, the expression **%(ENV\_LOGLEVEL)s** would be expanded to the value of the environment variable **LOGLEVEL**. **NOTE:** In Supervisor 3.2 and later, **%(ENV\_X)s** expressions are supported in all options. In prior versions, some options support them, but most do not. See the documentation for each option below. ### \[unix\_http\_server\] Section Settings The **supervisord.conf** file contains a section named **\[unix\_http\_server\]** under which configuration parameters for an HTTP server that listens on a UNIX domain socket should be inserted. If the configuration file has no **\[unix\_http\_server\]** section, a UNIX domain socket HTTP server will not be started. The allowable configuration values are as follows. ### \[unix\_http\_server\] Section Values **file** A path to a UNIX domain socket (e.g. **/tmp/supervisord.sock**) on which supervisor will listen for HTTP/XML-RPC requests. **supervisorctl** uses XML-RPC to communicate with **supervisord** over this port. This option can include the value **%(here)s**, which expands to the directory in which the **supervisord** configuration file was found. *Default*: None. *Required*: No. *Introduced*: 3.0 **chmod** Change the UNIX permission mode bits of the UNIX domain socket to this value at startup. *Default*: **0700** *Required*: No. *Introduced*: 3.0 **chown** Change the user and group of the socket file to this value. May be a UNIX username (e.g. **chrism**) or a UNIX username and group separated by a colon (e.g. **chrism:wheel**). *Default*: Use the username and group of the user who starts supervisord. *Required*: No. *Introduced*: 3.0 **username** The username required for authentication to this HTTP server. *Default*: No username required. *Required*: No. *Introduced*: 3.0 **password** The password required for authentication to this HTTP server. This can be a cleartext password, or can be specified as a SHA-1 hash if prefixed by the string **{SHA}**. For example, **{SHA}82ab876d1387bfafe46cc1c8a2ef074eae50cb1d** is the SHA-stored version of the password "thepassword". Note that hashed password must be in hex format. *Default*: No password required. *Required*: No. *Introduced*: 3.0 ### \[unix\_http\_server\] Section Example ``` [unix_http_server] file = /tmp/supervisor.sock chmod = 0777 chown= nobody:nogroup username = user password = 123 ``` ### \[inet\_http\_server\] Section Settings The **supervisord.conf** file contains a section named **\[inet\_http\_server\]** under which configuration parameters for an HTTP server that listens on a TCP (internet) socket should be inserted. If the configuration file has no **\[inet\_http\_server\]** section, an inet HTTP server will not be started. The allowable configuration values are as follows. ### \[inet\_http\_server\] Section Values **port** A TCP host:port value or (e.g. **127.0.0.1:9001**) on which supervisor will listen for HTTP/XML-RPC requests. **supervisorctl** will use XML-RPC to communicate with **supervisord** over this port. To listen on all interfaces in the machine, use **:9001** or **\*:9001**. *Default*: No default. *Required*: Yes. *Introduced*: 3.0 **username** The username required for authentication to this HTTP server. *Default*: No username required. *Required*: No. *Introduced*: 3.0 **password** The password required for authentication to this HTTP server. This can be a cleartext password, or can be specified as a SHA-1 hash if prefixed by the string **{SHA}**. For example, **{SHA}82ab876d1387bfafe46cc1c8a2ef074eae50cb1d** is the SHA-stored version of the password "thepassword". Note that hashed password must be in hex format. *Default*: No password required. *Required*: No. *Introduced*: 3.0 ### \[inet\_http\_server\] Section Example ``` [inet_http_server] port = 127.0.0.1:9001 username = user password = 123 ``` ### \[supervisord\] Section Settings The **supervisord.conf** file contains a section named **\[supervisord\]** in which global settings related to the **supervisord** process should be inserted. These are as follows. ### \[supervisord\] Section Values **logfile** The path to the activity log of the supervisord process. This option can include the value **%(here)s**, which expands to the directory in which the supervisord configuration file was found. *Default*: **$CWD/supervisord.log** *Required*: No. *Introduced*: 3.0 **logfile\_maxbytes** The maximum number of bytes that may be consumed by the activity log file before it is rotated (suffix multipliers like "KB", "MB", and "GB" can be used in the value). Set this value to 0 to indicate an unlimited log size. *Default*: 50MB *Required*: No. *Introduced*: 3.0 **logfile\_backups** The number of backups to keep around resulting from activity log file rotation. If set to 0, no backups will be kept. *Default*: 10 *Required*: No. *Introduced*: 3.0 **loglevel** The logging level, dictating what is written to the supervisord activity log. One of **critical**, **error**, **warn**, **info**, **debug**, **trace**, or **blather**. Note that at log level **debug**, the supervisord log file will record the stderr/stdout output of its child processes and extended info info about process state changes, which is useful for debugging a process which isn't starting properly. See also: activity\_log\_levels. *Default*: info *Required*: No. *Introduced*: 3.0 **pidfile** The location in which supervisord keeps its pid file. This option can include the value **%(here)s**, which expands to the directory in which the supervisord configuration file was found. *Default*: **$CWD/supervisord.pid** *Required*: No. *Introduced*: 3.0 **umask** The umask of the supervisord process. *Default*: **022** *Required*: No. *Introduced*: 3.0 **nodaemon** If true, supervisord will start in the foreground instead of daemonizing. *Default*: false *Required*: No. *Introduced*: 3.0 **minfds** The minimum number of file descriptors that must be available before supervisord will start successfully. A call to setrlimit will be made to attempt to raise the soft and hard limits of the supervisord process to satisfy **minfds**. The hard limit may only be raised if supervisord is run as root. supervisord uses file descriptors liberally, and will enter a failure mode when one cannot be obtained from the OS, so it's useful to be able to specify a minimum value to ensure it doesn't run out of them during execution. This option is particularly useful on Solaris, which has a low per-process fd limit by default. *Default*: 1024 *Required*: No. *Introduced*: 3.0 **minprocs** The minimum number of process descriptors that must be available before supervisord will start successfully. A call to setrlimit will be made to attempt to raise the soft and hard limits of the supervisord process to satisfy **minprocs**. The hard limit may only be raised if supervisord is run as root. supervisord will enter a failure mode when the OS runs out of process descriptors, so it's useful to ensure that enough process descriptors are available upon **supervisord** startup. *Default*: 200 *Required*: No. *Introduced*: 3.0 **nocleanup** Prevent supervisord from clearing any existing **AUTO** child log files at startup time. Useful for debugging. *Default*: false *Required*: No. *Introduced*: 3.0 **childlogdir** The directory used for **AUTO** child log files. This option can include the value **%(here)s**, which expands to the directory in which the **supervisord** configuration file was found. *Default*: value of Python's **tempfile.get\_tempdir()** *Required*: No. *Introduced*: 3.0 **user** Instruct **supervisord** to switch users to this UNIX user account before doing any meaningful processing. The user can only be switched if **supervisord** is started as the root user. If **supervisord** can't switch users, it will still continue but will write a log message at the **critical** level saying that it can't drop privileges. *Default*: do not switch users *Required*: No. *Introduced*: 3.0 **directory** When **supervisord** daemonizes, switch to this directory. This option can include the value **%(here)s**, which expands to the directory in which the **supervisord** configuration file was found. *Default*: do not cd *Required*: No. *Introduced*: 3.0 **strip\_ansi** Strip all ANSI escape sequences from child log files. *Default*: false *Required*: No. *Introduced*: 3.0 **environment** A list of key/value pairs in the form **KEY="val",KEY2="val2"** that will be placed in the **supervisord** process' environment (and as a result in all of its child process' environments). This option can include the value **%(here)s**, which expands to the directory in which the supervisord configuration file was found. Values containing non-alphanumeric characters should be quoted (e.g. **KEY="val:123",KEY2="val,456"**). Otherwise, quoting the values is optional but recommended. To escape percent characters, simply use two. (e.g. **URI="/first%%20name"**) **Note** that subprocesses will inherit the environment variables of the shell used to start **supervisord** except for the ones overridden here and within the program's **environment** option. See subprocess\_environment. *Default*: no values *Required*: No. *Introduced*: 3.0 **identifier** The identifier string for this supervisor process, used by the RPC interface. *Default*: supervisor *Required*: No. *Introduced*: 3.0 ### \[supervisord\] Section Example ``` [supervisord] logfile = /tmp/supervisord.log logfile_maxbytes = 50MB logfile_backups=10 loglevel = info pidfile = /tmp/supervisord.pid nodaemon = false minfds = 1024 minprocs = 200 umask = 022 user = chrism identifier = supervisor directory = /tmp nocleanup = true childlogdir = /tmp strip_ansi = false environment = KEY1="value1",KEY2="value2" ``` ### \[supervisorctl\] Section Settings The configuration file may contain settings for the **supervisorctl** interactive shell program. These options are listed below. ### \[supervisorctl\] Section Values **serverurl** The URL that should be used to access the supervisord server, e.g. **http://localhost:9001**. For UNIX domain sockets, use **unix:///absolute/path/to/file.sock**. *Default*: **http://localhost:9001** *Required*: No. *Introduced*: 3.0 **username** The username to pass to the supervisord server for use in authentication. This should be same as **username** from the supervisord server configuration for the port or UNIX domain socket you're attempting to access. *Default*: No username *Required*: No. *Introduced*: 3.0 **password** The password to pass to the supervisord server for use in authentication. This should be the cleartext version of **password** from the supervisord server configuration for the port or UNIX domain socket you're attempting to access. This value cannot be passed as a SHA hash. Unlike other passwords specified in this file, it must be provided in cleartext. *Default*: No password *Required*: No. *Introduced*: 3.0 **prompt** String used as supervisorctl prompt. *Default*: **supervisor** *Required*: No. *Introduced*: 3.0 **history\_file** A path to use as the **readline** persistent history file. If you enable this feature by choosing a path, your supervisorctl commands will be kept in the file, and you can use readline (e.g. arrow-up) to invoke commands you performed in your last supervisorctl session. *Default*: No file *Required*: No. *Introduced*: 3.0a5 ### \[supervisorctl\] Section Example ``` [supervisorctl] serverurl = unix:///tmp/supervisor.sock username = chris password = 123 prompt = mysupervisor ``` ### \[program:x\] Section Settings The configuration file must contain one or more **program** sections in order for supervisord to know which programs it should start and control. The header value is composite value. It is the word "program", followed directly by a colon, then the program name. A header value of **\[program:foo\]** describes a program with the name of "foo". The name is used within client applications that control the processes that are created as a result of this configuration. It is an error to create a **program** section that does not have a name. The name must not include a colon character or a bracket character. The value of the name is used as the value for the **%(program\_name)s** string expression expansion within other values where specified. **NOTE:** A **\[program:x\]** section actually represents a "homogeneous process group" to supervisor (as of 3.0). The members of the group are defined by the combination of the **numprocs** and **process\_name** parameters in the configuration. By default, if numprocs and process\_name are left unchanged from their defaults, the group represented by **\[program:x\]** will be named **x** and will have a single process named **x** in it. This provides a modicum of backwards compatibility with older supervisor releases, which did not treat program sections as homogeneous process group definitions. But for instance, if you have a **\[program:foo\]** section with a **numprocs** of 3 and a **process\_name** expression of **%(program\_name)s\_%(process\_num)02d**, the "foo" group will contain three processes, named **foo\_00**, **foo\_01**, and **foo\_02**. This makes it possible to start a number of very similar processes using a single **\[program:x\]** section. All logfile names, all environment strings, and the command of programs can also contain similar Python string expressions, to pass slightly different parameters to each process. ### \[program:x\] Section Values **command** The command that will be run when this program is started. The command can be either absolute (e.g. **/path/to/programname**) or relative (e.g. **programname**). If it is relative, the supervisord's environment **$PATH** will be searched for the executable. Programs can accept arguments, e.g. **/path/to/program** **foo bar**. The command line can use double quotes to group arguments with spaces in them to pass to the program, e.g. **/path/to/program/name -p "foo bar"**. Note that the value of **command** may include Python string expressions, e.g. **/path/to/programname --port=80%(process\_num)02d** might expand to **/path/to/programname --port=8000** at runtime. String expressions are evaluated against a dictionary containing the keys **group\_name**, **host\_node\_name**, **process\_num**, **program\_name**, **here** (the directory of the supervisord config file), and all supervisord's environment variables prefixed with **ENV\_**. Controlled programs should themselves not be daemons, as supervisord assumes it is responsible for daemonizing its subprocesses (see nondaemonizing\_of\_subprocesses). *Default*: No default. *Required*: Yes. *Introduced*: 3.0 **process\_name** A Python string expression that is used to compose the supervisor process name for this process. You usually don't need to worry about setting this unless you change **numprocs**. The string expression is evaluated against a dictionary that includes **group\_name**, **host\_node\_name**, **process\_num**, **program\_name**, and **here** (the directory of the supervisord config file). *Default*: **%(program\_name)s** *Required*: No. *Introduced*: 3.0 **numprocs** Supervisor will start as many instances of this program as named by numprocs. Note that if numprocs \> 1, the **process\_name** expression must include **%(process\_num)s** (or any other valid Python string expression that includes **process\_num**) within it. *Default*: 1 *Required*: No. *Introduced*: 3.0 **numprocs\_start** An integer offset that is used to compute the number at which **numprocs** starts. *Default*: 0 *Required*: No. *Introduced*: 3.0 **priority** The relative priority of the program in the start and shutdown ordering. Lower priorities indicate programs that start first and shut down last at startup and when aggregate commands are used in various clients (e.g. "start all"/"stop all"). Higher priorities indicate programs that start last and shut down first. *Default*: 999 *Required*: No. *Introduced*: 3.0 **autostart** If true, this program will start automatically when supervisord is started. *Default*: true *Required*: No. *Introduced*: 3.0 **startsecs** The total number of seconds which the program needs to stay running after a startup to consider the start successful (moving the process from the **STARTING** state to the **RUNNING** state). Set to **0** to indicate that the program needn't stay running for any particular amount of time. **NOTE:** Even if a process exits with an "expected" exit code (see **exitcodes**), the start will still be considered a failure if the process exits quicker than **startsecs**. *Default*: 1 *Required*: No. *Introduced*: 3.0 **startretries** The number of serial failure attempts that **supervisord** will allow when attempting to start the program before giving up and putting the process into an **FATAL** state. See process\_states for explanation of the **FATAL** state. *Default*: 3 *Required*: No. *Introduced*: 3.0 **autorestart** Specifies if **supervisord** should automatically restart a process if it exits when it is in the **RUNNING** state. May be one of **false**, **unexpected**, or **true**. If **false**, the process will not be autorestarted. If **unexpected**, the process will be restarted when the program exits with an exit code that is not one of the exit codes associated with this process' configuration (see **exitcodes**). If **true**, the process will be unconditionally restarted when it exits, without regard to its exit code. **NOTE:** **autorestart** controls whether **supervisord** will autorestart a program if it exits after it has successfully started up (the process is in the **RUNNING** state). **supervisord** has a different restart mechanism for when the process is starting up (the process is in the **STARTING** state). Retries during process startup are controlled by **startsecs** and **startretries**. *Default*: unexpected *Required*: No. *Introduced*: 3.0 **exitcodes** The list of "expected" exit codes for this program used with **autorestart**. If the **autorestart** parameter is set to **unexpected**, and the process exits in any other way than as a result of a supervisor stop request, **supervisord** will restart the process if it exits with an exit code that is not defined in this list. *Default*: 0,2 *Required*: No. *Introduced*: 3.0 **stopsignal** The signal used to kill the program when a stop is requested. This can be any of TERM, HUP, INT, QUIT, KILL, USR1, or USR2. *Default*: TERM *Required*: No. *Introduced*: 3.0 **stopwaitsecs** The number of seconds to wait for the OS to return a SIGCHILD to **supervisord** after the program has been sent a stopsignal. If this number of seconds elapses before **supervisord** receives a SIGCHILD from the process, **supervisord** will attempt to kill it with a final SIGKILL. *Default*: 10 *Required*: No. *Introduced*: 3.0 **stopasgroup** If true, the flag causes supervisor to send the stop signal to the whole process group and implies **killasgroup** is true. This is useful for programs, such as Flask in debug mode, that do not propagate stop signals to their children, leaving them orphaned. *Default*: false *Required*: No. *Introduced*: 3.0b1 **killasgroup** If true, when resorting to send SIGKILL to the program to terminate it send it to its whole process group instead, taking care of its children as well, useful e.g with Python programs using **multiprocessing**. *Default*: false *Required*: No. *Introduced*: 3.0a11 **user** Instruct **supervisord** to use this UNIX user account as the account which runs the program. The user can only be switched if **supervisord** is run as the root user. If **supervisord** can't switch to the specified user, the program will not be started. **NOTE:** The user will be changed using **setuid** only. This does not start a login shell and does not change environment variables like **USER** or **HOME**. See subprocess\_environment for details. *Default*: Do not switch users *Required*: No. *Introduced*: 3.0 **redirect\_stderr** If true, cause the process' stderr output to be sent back to **supervisord** on its stdout file descriptor (in UNIX shell terms, this is the equivalent of executing **/the/program 2\>&1**). **NOTE:** Do not set **redirect\_stderr=true** in an **\[eventlistener:x\]** section. Eventlisteners use **stdout** and **stdin** to communicate with **supervisord**. If **stderr** is redirected, output from **stderr** will interfere with the eventlistener protocol. *Default*: false *Required*: No. *Introduced*: 3.0, replaces 2.0's **log\_stdout** and **log\_stderr** **stdout\_logfile** Put process stdout output in this file (and if redirect\_stderr is true, also place stderr output in this file). If **stdout\_logfile** is unset or set to **AUTO**, supervisor will automatically choose a file location. If this is set to **NONE**, supervisord will create no log file. **AUTO** log files and their backups will be deleted when **supervisord** restarts. The **stdout\_logfile** value can contain Python string expressions that will evaluated against a dictionary that contains the keys **group\_name**, **host\_node\_name**, **process\_num**, **program\_name**, and **here** (the directory of the supervisord config file). **NOTE:** It is not possible for two processes to share a single log file (**stdout\_logfile**) when rotation (**stdout\_logfile\_maxbytes**) is enabled. This will result in the file being corrupted. *Default*: **AUTO** *Required*: No. *Introduced*: 3.0, replaces 2.0's **logfile** **stdout\_logfile\_maxbytes** The maximum number of bytes that may be consumed by **stdout\_logfile** before it is rotated (suffix multipliers like "KB", "MB", and "GB" can be used in the value). Set this value to 0 to indicate an unlimited log size. *Default*: 50MB *Required*: No. *Introduced*: 3.0, replaces 2.0's **logfile\_maxbytes** **stdout\_logfile\_backups** The number of **stdout\_logfile** backups to keep around resulting from process stdout log file rotation. If set to 0, no backups will be kept. *Default*: 10 *Required*: No. *Introduced*: 3.0, replaces 2.0's **logfile\_backups** **stdout\_capture\_maxbytes** Max number of bytes written to capture FIFO when process is in "stdout capture mode" (see capture\_mode). Should be an integer (suffix multipliers like "KB", "MB" and "GB" can used in the value). If this value is 0, process capture mode will be off. *Default*: 0 *Required*: No. *Introduced*: 3.0, replaces 2.0's **logfile\_backups** **stdout\_events\_enabled** If true, PROCESS\_LOG\_STDOUT events will be emitted when the process writes to its stdout file descriptor. The events will only be emitted if the file descriptor is not in capture mode at the time the data is received (see capture\_mode). *Default*: 0 *Required*: No. *Introduced*: 3.0a7 **stderr\_logfile** Put process stderr output in this file unless **redirect\_stderr** is true. Accepts the same value types as **stdout\_logfile** and may contain the same Python string expressions. **NOTE:** It is not possible for two processes to share a single log file (**stderr\_logfile**) when rotation (**stderr\_logfile\_maxbytes**) is enabled. This will result in the file being corrupted. *Default*: **AUTO** *Required*: No. *Introduced*: 3.0 **stderr\_logfile\_maxbytes** The maximum number of bytes before logfile rotation for **stderr\_logfile**. Accepts the same value types as **stdout\_logfile\_maxbytes**. *Default*: 50MB *Required*: No. *Introduced*: 3.0 **stderr\_logfile\_backups** The number of backups to keep around resulting from process stderr log file rotation. If set to 0, no backups will be kept. *Default*: 10 *Required*: No. *Introduced*: 3.0 **stderr\_capture\_maxbytes** Max number of bytes written to capture FIFO when process is in "stderr capture mode" (see capture\_mode). Should be an integer (suffix multipliers like "KB", "MB" and "GB" can used in the value). If this value is 0, process capture mode will be off. *Default*: 0 *Required*: No. *Introduced*: 3.0 **stderr\_events\_enabled** If true, PROCESS\_LOG\_STDERR events will be emitted when the process writes to its stderr file descriptor. The events will only be emitted if the file descriptor is not in capture mode at the time the data is received (see capture\_mode). *Default*: false *Required*: No. *Introduced*: 3.0a7 **environment** A list of key/value pairs in the form **KEY="val",KEY2="val2"** that will be placed in the child process' environment. The environment string may contain Python string expressions that will be evaluated against a dictionary containing **group\_name**, **host\_node\_name**, **process\_num**, **program\_name**, and **here** (the directory of the supervisord config file). Values containing non-alphanumeric characters should be quoted (e.g. **KEY="val:123",KEY2="val,456"**). Otherwise, quoting the values is optional but recommended. **Note** that the subprocess will inherit the environment variables of the shell used to start "supervisord" except for the ones overridden here. See subprocess\_environment. *Default*: No extra environment *Required*: No. *Introduced*: 3.0 **directory** A file path representing a directory to which **supervisord** should temporarily chdir before exec'ing the child. *Default*: No chdir (inherit supervisor's) *Required*: No. *Introduced*: 3.0 **umask** An octal number (e.g. 002, 022) representing the umask of the process. *Default*: No special umask (inherit supervisor's) *Required*: No. *Introduced*: 3.0 **serverurl** The URL passed in the environment to the subprocess process as **SUPERVISOR\_SERVER\_URL** (see **supervisor.childutils**) to allow the subprocess to easily communicate with the internal HTTP server. If provided, it should have the same syntax and structure as the **\[supervisorctl\]** section option of the same name. If this is set to AUTO, or is unset, supervisor will automatically construct a server URL, giving preference to a server that listens on UNIX domain sockets over one that listens on an internet socket. *Default*: AUTO *Required*: No. *Introduced*: 3.0 ### \[program:x\] Section Example ``` [program:cat] command=/bin/cat process_name=%(program_name)s numprocs=1 directory=/tmp umask=022 priority=999 autostart=true autorestart=unexpected startsecs=10 startretries=3 exitcodes=0,2 stopsignal=TERM stopwaitsecs=10 stopasgroup=false killasgroup=false user=chrism redirect_stderr=false stdout_logfile=/a/path stdout_logfile_maxbytes=1MB stdout_logfile_backups=10 stdout_capture_maxbytes=1MB stdout_events_enabled=false stderr_logfile=/a/path stderr_logfile_maxbytes=1MB stderr_logfile_backups=10 stderr_capture_maxbytes=1MB stderr_events_enabled=false environment=A="1",B="2" serverurl=AUTO ``` ### \[include\] Section Settings The **supervisord.conf** file may contain a section named **\[include\]**. If the configuration file contains an **\[include\]** section, it must contain a single key named "files". The values in this key specify other configuration files to be included within the configuration. ### \[include\] Section Values **files** A space-separated sequence of file globs. Each file glob may be absolute or relative. If the file glob is relative, it is considered relative to the location of the configuration file which includes it. A "glob" is a file pattern which matches a specified pattern according to the rules used by the Unix shell. No tilde expansion is done, but **\***, **?**, and character ranges expressed with **\[\]** will be correctly matched. Recursive includes from included files are not supported. *Default*: No default (required) *Required*: Yes. *Introduced*: 3.0 ### \[include\] Section Example ``` [include] files = /an/absolute/filename.conf /an/absolute/*.conf foo.conf config??.conf ``` ### \[group:x\] Section Settings It is often useful to group "homogeneous" process groups (aka "programs") together into a "heterogeneous" process group so they can be controlled as a unit from Supervisor's various controller interfaces. To place programs into a group so you can treat them as a unit, define a **\[group:x\]** section in your configuration file. The group header value is a composite. It is the word "group", followed directly by a colon, then the group name. A header value of **\[group:foo\]** describes a group with the name of "foo". The name is used within client applications that control the processes that are created as a result of this configuration. It is an error to create a **group** section that does not have a name. The name must not include a colon character or a bracket character. For a **\[group:x\]**, there must be one or more **\[program:x\]** sections elsewhere in your configuration file, and the group must refer to them by name in the **programs** value. If "homogeneous" process groups (represented by program sections) are placed into a "heterogeneous" group via **\[group:x\]** section's **programs** line, the homogeneous groups that are implied by the program section will not exist at runtime in supervisor. Instead, all processes belonging to each of the homogeneous groups will be placed into the heterogeneous group. For example, given the following group configuration: ``` [group:foo] programs=bar,baz priority=999 ``` Given the above, at supervisord startup, the **bar** and **baz** homogeneous groups will not exist, and the processes that would have been under them will now be moved into the **foo** group. ### \[group:x\] Section Values **programs** A comma-separated list of program names. The programs which are listed become members of the group. *Default*: No default (required) *Required*: Yes. *Introduced*: 3.0 **priority** A priority number analogous to a **\[program:x\]** priority value assigned to the group. *Default*: 999 *Required*: No. *Introduced*: 3.0 ### \[group:x\] Section Example ``` [group:foo] programs=bar,baz priority=999 ``` ### \[fcgi-program:x\] Section Settings Supervisor can manage groups of *FastCGI* processes that all listen on the same socket. Until now, deployment flexibility for FastCGI was limited. To get full process management, you could use mod\_fastcgi under Apache but then you were stuck with Apache's inefficient concurrency model of one process or thread per connection. In addition to requiring more CPU and memory resources, the process/thread per connection model can be quickly saturated by a slow resource, preventing other resources from being served. In order to take advantage of newer event-driven web servers such as lighttpd or nginx which don't include a built-in process manager, you had to use scripts like cgi-fcgi or spawn-fcgi. These can be used in conjunction with a process manager such as supervisord or daemontools but require each FastCGI child process to bind to its own socket. The disadvantages of this are: unnecessarily complicated web server configuration, ungraceful restarts, and reduced fault tolerance. With fewer sockets to configure, web server configurations are much smaller if groups of FastCGI processes can share sockets. Shared sockets allow for graceful restarts because the socket remains bound by the parent process while any of the child processes are being restarted. Finally, shared sockets are more fault tolerant because if a given process fails, other processes can continue to serve inbound connections. With integrated FastCGI spawning support, Supervisor gives you the best of both worlds. You get full-featured process management with groups of FastCGI processes sharing sockets without being tied to a particular web server. It's a clean separation of concerns, allowing the web server and the process manager to each do what they do best. **NOTE:** The socket manager in Supervisor was originally developed to support FastCGI processes but it is not limited to FastCGI. Other protocols may be used as well with no special configuration. Any program that can access an open socket from a file descriptor (e.g. with *socket.fromfd* in Python) can use the socket manager. Supervisor will automatically create the socket, bind, and listen before forking the first child in a group. The socket will be passed to each child on file descriptor number **0** (zero). When the last child in the group exits, Supervisor will close the socket. All the options available to **\[program:x\]** sections are also respected by **fcgi-program** sections. ### \[fcgi-program:x\] Section Values **\[fcgi-program:x\]** sections have a single key which **\[program:x\]** sections do not have. **socket** The FastCGI socket for this program, either TCP or UNIX domain socket. For TCP sockets, use this format: **tcp://localhost:9002**. For UNIX domain sockets, use **unix:///absolute/path/to/file.sock**. String expressions are evaluated against a dictionary containing the keys "program\_name" and "here" (the directory of the supervisord config file). *Default*: No default. *Required*: Yes. *Introduced*: 3.0 **socket\_owner** For UNIX domain sockets, this parameter can be used to specify the user and group for the FastCGI socket. May be a UNIX username (e.g. chrism) or a UNIX username and group separated by a colon (e.g. chrism:wheel). *Default*: Uses the user and group set for the fcgi-program *Required*: No. *Introduced*: 3.0 **socket\_mode** For UNIX domain sockets, this parameter can be used to specify the permission mode. *Default*: 0700 *Required*: No. *Introduced*: 3.0 Consult *\[program:x\] Section Settings* for other allowable keys, delta the above constraints and additions. ### \[fcgi-program:x\] Section Example ``` [fcgi-program:fcgiprogramname] command=/usr/bin/example.fcgi socket=unix:///var/run/supervisor/%(program_name)s.sock socket_owner=chrism socket_mode=0700 process_name=%(program_name)s_%(process_num)02d numprocs=5 directory=/tmp umask=022 priority=999 autostart=true autorestart=unexpected startsecs=1 startretries=3 exitcodes=0,2 stopsignal=QUIT stopasgroup=false killasgroup=false stopwaitsecs=10 user=chrism redirect_stderr=true stdout_logfile=/a/path stdout_logfile_maxbytes=1MB stdout_logfile_backups=10 stdout_events_enabled=false stderr_logfile=/a/path stderr_logfile_maxbytes=1MB stderr_logfile_backups=10 stderr_events_enabled=false environment=A="1",B="2" serverurl=AUTO ``` ### \[eventlistener:x\] Section Settings Supervisor allows specialized homogeneous process groups ("event listener pools") to be defined within the configuration file. These pools contain processes that are meant to receive and respond to event notifications from supervisor's event system. See events for an explanation of how events work and how to implement programs that can be declared as event listeners. Note that all the options available to **\[program:x\]** sections are respected by eventlistener sections *except* for **stdout\_capture\_maxbytes** and **stderr\_capture\_maxbytes** (event listeners cannot emit process communication events, see capture\_mode). ### \[eventlistener:x\] Section Values **\[eventlistener:x\]** sections have a few keys which **\[program:x\]** sections do not have. **buffer\_size** The event listener pool's event queue buffer size. When a listener pool's event buffer is overflowed (as can happen when an event listener pool cannot keep up with all of the events sent to it), the oldest event in the buffer is discarded. **events** A comma-separated list of event type names that this listener is "interested" in receiving notifications for (see event\_types for a list of valid event type names). **result\_handler** A *pkg\_resources entry point string* that resolves to a Python callable. The default value is **supervisor.dispatchers:default\_handler**. Specifying an alternate result handler is a very uncommon thing to need to do, and as a result, how to create one is not documented. Consult *\[program:x\] Section Settings* for other allowable keys, delta the above constraints and additions. ### \[eventlistener:x\] Section Example ``` [eventlistener:theeventlistenername] command=/bin/eventlistener process_name=%(program_name)s_%(process_num)02d numprocs=5 events=PROCESS_STATE buffer_size=10 directory=/tmp umask=022 priority=-1 autostart=true autorestart=unexpected startsecs=1 startretries=3 exitcodes=0,2 stopsignal=QUIT stopwaitsecs=10 stopasgroup=false killasgroup=false user=chrism redirect_stderr=false stdout_logfile=/a/path stdout_logfile_maxbytes=1MB stdout_logfile_backups=10 stdout_events_enabled=false stderr_logfile=/a/path stderr_logfile_maxbytes=1MB stderr_logfile_backups=10 stderr_events_enabled=false environment=A="1",B="2" serverurl=AUTO ``` ### \[rpcinterface:x\] Section Settings Adding **rpcinterface:x** settings in the configuration file is only useful for people who wish to extend supervisor with additional custom behavior. In the sample config file, there is a section which is named **\[rpcinterface:supervisor\]**. By default it looks like the following. ``` [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface ``` The **\[rpcinterface:supervisor\]** section *must* remain in the configuration for the standard setup of supervisor to work properly. If you don't want supervisor to do anything it doesn't already do out of the box, this is all you need to know about this type of section. However, if you wish to add rpc interface namespaces in order to customize supervisor, you may add additional **\[rpcinterface:foo\]** sections, where "foo" represents the namespace of the interface (from the web root), and the value named by **supervisor.rpcinterface\_factory** is a factory callable which should have a function signature that accepts a single positional argument **supervisord** and as many keyword arguments as required to perform configuration. Any extra key/value pairs defined within the **\[rpcinterface:x\]** section will be passed as keyword arguments to the factory. Here's an example of a factory function, created in the **\_\_init\_\_.py** file of the Python package **my.package**. ``` from my.package.rpcinterface import AnotherRPCInterface def make_another_rpcinterface(supervisord, **config): retries = int(config.get('retries', 0)) another_rpc_interface = AnotherRPCInterface(supervisord, retries) return another_rpc_interface ``` And a section in the config file meant to configure it. ``` [rpcinterface:another] supervisor.rpcinterface_factory = my.package:make_another_rpcinterface retries = 1 ``` ### \[rpcinterface:x\] Section Values **supervisor.rpcinterface\_factory** **pkg\_resources** "entry point" dotted name to your RPC interface's factory function. *Default*: N/A *Required*: No. *Introduced*: 3.0 ### \[rpcinterface:x\] Section Example ``` [rpcinterface:another] supervisor.rpcinterface_factory = my.package:make_another_rpcinterface retries = 1 ``` ### Subprocesses **supervisord**'s primary purpose is to create and manage processes based on data in its configuration file. It does this by creating subprocesses. Each subprocess spawned by supervisor is managed for the entirety of its lifetime by supervisord (**supervisord** is the parent process of each process it creates). When a child dies, supervisor is notified of its death via the **SIGCHLD** signal, and it performs the appropriate operation. ### Nondaemonizing of Subprocesses Programs meant to be run under supervisor should not daemonize themselves. Instead, they should run in the foreground. They should not detach from the terminal from which they are started. The easiest way to tell if a program will run in the foreground is to run the command that invokes the program from a shell prompt. If it gives you control of the terminal back, but continues running, it's daemonizing itself and that will almost certainly be the wrong way to run it under supervisor. You want to run a command that essentially requires you to press **Ctrl-C** to get control of the terminal back. If it gives you a shell prompt back after running it without needing to press **Ctrl-C**, it's not useful under supervisor. All programs have options to be run in the foreground but there's no "standard way" to do it; you'll need to read the documentation for each program. Below are configuration file examples that are known to start common programs in "foreground" mode under Supervisor. ### Examples of Program Configurations Here are some "real world" program configuration examples: ### Apache 2.2.6 ``` [program:apache2] command=/path/to/httpd -c "ErrorLog /dev/stdout" -DFOREGROUND redirect_stderr=true ``` ### Two Zope 2.X instances and one ZEO server ``` [program:zeo] command=/path/to/runzeo priority=1 [program:zope1] command=/path/to/instance/home/bin/runzope priority=2 redirect_stderr=true [program:zope2] command=/path/to/another/instance/home/bin/runzope priority=2 redirect_stderr=true ``` ### Postgres 8.X ``` [program:postgres] command=/path/to/postmaster ; we use the "fast" shutdown signal SIGINT stopsignal=INT redirect_stderr=true ``` ### OpenLDAP slapd ``` [program:slapd] command=/path/to/slapd -f /path/to/slapd.conf -h ldap://0.0.0.0:8888 redirect_stderr=true ``` ### Other Examples Other examples of shell scripts that could be used to start services under **supervisord** can be found at *http://thedjbway.b0llix.net/services.html*. These examples are actually for **daemontools** but the premise is the same for supervisor. Another collection of recipes for starting various programs in the foreground is available from *http://smarden.org/runit/runscripts.html*. ### pidproxy Program Some processes (like **mysqld**) ignore signals sent to the actual process which is spawned by **supervisord**. Instead, a "special" thread/process is created by these kinds of programs which is responsible for handling signals. This is problematic because **supervisord** can only kill a process which it creates itself. If a process created by **supervisord** creates its own child processes, **supervisord** cannot kill them. Fortunately, these types of programs typically write a "pidfile" which contains the "special" process' PID, and is meant to be read and used in order to kill the process. As a workaround for this case, a special **pidproxy** program can handle startup of these kinds of processes. The **pidproxy** program is a small shim that starts a process, and upon the receipt of a signal, sends the signal to the pid provided in a pidfile. A sample configuration program entry for a pidproxy-enabled program is provided below. ``` [program:mysql] command=/path/to/pidproxy /path/to/pidfile /path/to/mysqld_safe ``` The **pidproxy** program is put into your configuration's **$BINDIR** when supervisor is installed (it is a "console script"). ### Subprocess Environment Subprocesses will inherit the environment of the shell used to start the **supervisord** program. Several environment variables will be set by **supervisord** itself in the child's environment also, including **SUPERVISOR\_ENABLED** (a flag indicating the process is under supervisor control), **SUPERVISOR\_PROCESS\_NAME** (the config-file-specified process name for this process) and **SUPERVISOR\_GROUP\_NAME** (the config-file-specified process group name for the child process). These environment variables may be overridden within the **\[supervisord\]** section config option named **environment** (applies to all subprocesses) or within the per- **\[program:x\]** section **environment** config option (applies only to the subprocess specified within the **\[program:x\]** section). These "environment" settings are additive. In other words, each subprocess' environment will consist of: The environment variables set within the shell used to start supervisord... ... added-to/overridden-by ... - **... the environment variables set within the environment global** config option ... ... added-to/overridden-by ... - **... supervisor-specific environment variables** (**SUPERVISOR\_ENABLED**, **SUPERVISOR\_PROCESS\_NAME**, **SUPERVISOR\_GROUP\_NAME**) .. ... added-to/overridden-by ... - **... the environment variables set within the per-process** "environment" config option. No shell is executed by **supervisord** when it runs a subprocess, so environment variables such as **USER**, **PATH**, **HOME**, **SHELL**, **LOGNAME**, etc. are not changed from their defaults or otherwise reassigned. This is particularly important to note when you are running a program from a **supervisord** run as root with a **user=** stanza in the configuration. Unlike **cron**, **supervisord** does not attempt to divine and override "fundamental" environment variables like **USER**, **PATH**, **HOME**, and **LOGNAME** when it performs a setuid to the user defined within the **user=** program config option. If you need to set environment variables for a particular program that might otherwise be set by a shell invocation for a particular user, you must do it explicitly within the **environment=** program config option. An example of setting these environment variables is as below. ``` [program:apache2] command=/home/chrism/bin/httpd -c "ErrorLog /dev/stdout" -DFOREGROUND user=chrism environment=HOME="/home/chrism",USER="chrism" ``` ### Process States A process controlled by supervisord will be in one of the below states at any given time. You may see these state names in various user interface elements in clients. **STOPPED** (0) The process has been stopped due to a stop request or has never been started. **STARTING** (10) The process is starting due to a start request. **RUNNING** (20) The process is running. **BACKOFF** (30) The process entered the **STARTING** state but subsequently exited too quickly to move to the **RUNNING** state. **STOPPING** (40) The process is stopping due to a stop request. **EXITED** (100) The process exited from the **RUNNING** state (expectedly or unexpectedly). **FATAL** (200) The process could not be started successfully. **UNKNOWN** (1000) The process is in an unknown state (**supervisord** programming error). Each process run under supervisor progresses through these states as per the following directed graph. \[image: Subprocess State Transition Graph\] \[image\] Subprocess State Transition Graph.UNINDENT A process is in the **STOPPED** state if it has been stopped adminstratively or if it has never been started. When an autorestarting process is in the **BACKOFF** state, it will be automatically restarted by **supervisord**. It will switch between **STARTING** and **BACKOFF** states until it becomes evident that it cannot be started because the number of **startretries** has exceeded the maximum, at which point it will transition to the **FATAL** state. Each start retry will take progressively more time. When a process is in the **EXITED** state, it will automatically restart: - • never if its **autorestart** parameter is set to **false**. - • unconditionally if its **autorestart** parameter is set to **true**. - • conditionally if its **autorestart** parameter is set to **unexpected**. If it exited with an exit code that doesn't match one of the exit codes defined in the **exitcodes** configuration parameter for the process, it will be restarted. A process automatically transitions from **EXITED** to **RUNNING** as a result of being configured to autorestart conditionally or unconditionally. The number of transitions between **RUNNING** and **EXITED** is not limited in any way: it is possible to create a configuration that endlessly restarts an exited process. This is a feature, not a bug. An autorestarted process will never be automatically restarted if it ends up in the **FATAL** state (it must be manually restarted from this state). A process transitions into the **STOPPING** state via an administrative stop request, and will then end up in the **STOPPED** state. A process that cannot be stopped successfully will stay in the **STOPPING** state forever. This situation should never be reached during normal operations as it implies that the process did not respond to a final **SIGKILL** signal sent to it by supervisor, which is "impossible" under UNIX. State transitions which always require user action to invoke are these: **FATAL** -\> **STARTING** **RUNNING** -\> **STOPPING** State transitions which typically, but not always, require user action to invoke are these, with exceptions noted: **STOPPED** -\> **STARTING** (except at supervisord startup if process is configured to autostart) **EXITED** -\> **STARTING** (except if process is configured to autorestart) All other state transitions are managed by supervisord automatically. ### Logging One of the main tasks that **supervisord** performs is logging. **supervisord** logs an activity log detailing what it's doing as it runs. It also logs child process stdout and stderr output to other files if configured to do so. ### Activity Log The activity log is the place where **supervisord** logs messages about its own health, its subprocess' state changes, any messages that result from events, and debug and informational messages. The path to the activity log is configured via the **logfile** parameter in the **\[supervisord\]** section of the configuration file, defaulting to **$CWD/supervisord.log**. Sample activity log traffic is shown in the example below. Some lines have been broken to better fit the screen. ### Sample Activity Log Output ``` 2007-09-08 14:43:22,886 DEBG 127.0.0.1:Medusa (V1.11) started at Sat Sep 8 14:43:22 2007 Hostname: kingfish Port:9001 2007-09-08 14:43:22,961 INFO RPC interface 'supervisor' initialized 2007-09-08 14:43:22,961 CRIT Running without any HTTP authentication checking 2007-09-08 14:43:22,962 INFO supervisord started with pid 27347 2007-09-08 14:43:23,965 INFO spawned: 'listener_00' with pid 27349 2007-09-08 14:43:23,970 INFO spawned: 'eventgen' with pid 27350 2007-09-08 14:43:23,990 INFO spawned: 'grower' with pid 27351 2007-09-08 14:43:24,059 DEBG 'listener_00' stderr output: /Users/chrism/projects/supervisor/supervisor2/dev-sandbox/bin/python: can't open file '/Users/chrism/projects/supervisor/supervisor2/src/supervisor/scripts/osx_eventgen_listener.py': [Errno 2] No such file or directory 2007-09-08 14:43:24,060 DEBG fd 7 closed, stopped monitoring (stdout)> 2007-09-08 14:43:24,060 INFO exited: listener_00 (exit status 2; not expected) 2007-09-08 14:43:24,061 DEBG received SIGCHLD indicating a child quit ``` The activity log "level" is configured in the config file via the **loglevel** parameter in the **\[supervisord\]** ini file section. When **loglevel** is set, messages of the specified priority, plus those with any higher priority are logged to the activity log. For example, if **loglevel** is **error**, messages of **error** and **critical** priority will be logged. However, if loglevel is **warn**, messages of **warn**, **error**, and **critical** will be logged. ### Activity Log Levels The below table describes the logging levels in more detail, ordered in highest priority to lowest. The "Config File Value" is the string provided to the **loglevel** parameter in the **\[supervisord\]** section of configuration file and the "Output Code" is the code that shows up in activity log output lines. | | | | | --- | --- | --- | | Config File Value | Output Code | Description | | critical | CRIT | Messages that indicate a condition that requires immediate user attention, a supervisor state change, or an error in supervisor itself. | | error | ERRO | Messages that indicate a potentially ignorable error condition (e.g. unable to clear a log directory). | | warn | WARN | Messages that indicate an anomalous condition which isn't an error. | | info | INFO | Normal informational output. This is the default log level if none is explicitly configured. | | debug | DEBG | Messages useful for users trying to debug process configuration and communications behavior (process output, listener state changes, event notifications). | | trace | TRAC | Messages useful for developers trying to debug supervisor plugins, and information about HTTP and RPC requests and responses. | | blather | BLAT | Messages useful for developers trying to debug supervisor itself. | ### Activity Log Rotation The activity log is "rotated" by **supervisord** based on the combination of the **logfile\_maxbytes** and the **logfile\_backups** parameters in the **\[supervisord\]** section of the configuration file. When the activity log reaches **logfile\_maxbytes** bytes, the current log file is moved to a backup file and a new activity log file is created. When this happens, if the number of existing backup files is greater than or equal to **logfile\_backups**, the oldest backup file is removed and the backup files are renamed accordingly. If the file being written to is named **supervisord.log**, when it exceeds **logfile\_maxbytes**, it is closed and renamed to **supervisord.log.1**, and if files **supervisord.log.1**, **supervisord.log.2** etc. exist, then they are renamed to **supervisord.log.2**, **supervisord.log.3** etc. respectively. If **logfile\_maxbytes** is 0, the logfile is never rotated (and thus backups are never made). If **logfile\_backups** is 0, no backups will be kept. ### Child Process Logs The stdout of child processes spawned by supervisor, by default, is captured for redisplay to users of **supervisorctl** and other clients. If no specific logfile-related configuration is performed in a **\[program:x\]**, **\[fcgi-program:x\]**, or **\[eventlistener:x\]** section in the configuration file, the following is true: - • **supervisord** will capture the child process' stdout and stderr output into temporary files. Each stream is captured to a separate file. This is known as **AUTO** log mode. - • **AUTO** log files are named automatically and placed in the directory configured as **childlogdir** of the **\[supervisord\]** section of the config file. - • The size of each **AUTO** log file is bounded by the **{streamname}\_logfile\_maxbytes** value of the program section (where {streamname} is "stdout" or "stderr"). When it reaches that number, it is rotated (like the activity log), based on the **{streamname}\_logfile\_backups**. The configuration keys that influence child process logging in **\[program:x\]** and **\[fcgi-program:x\]** sections are these: **redirect\_stderr**, **stdout\_logfile**, **stdout\_logfile\_maxbytes**, **stdout\_logfile\_backups**, **stdout\_capture\_maxbytes**, **stderr\_logfile**, **stderr\_logfile\_maxbytes**, **stderr\_logfile\_backups** and **stderr\_capture\_maxbytes**. One may set **stdout\_logfile** or **stderr\_logfile** to the special string "syslog". In this case, logs will be routed to the syslog service instead of being saved to files. **\[eventlistener:x\]** sections may not specify **redirect\_stderr**, **stdout\_capture\_maxbytes**, or **stderr\_capture\_maxbytes**, but otherwise they accept the same values. The configuration keys that influence child process logging in the **\[supervisord\]** config file section are these: **childlogdir**, and **nocleanup**. ### Capture Mode Capture mode is an advanced feature of Supervisor. You needn't understand capture mode unless you want to take actions based on data parsed from subprocess output. If a **\[program:x\]** section in the configuration file defines a non-zero **stdout\_capture\_maxbytes** or **stderr\_capture\_maxbytes** parameter, each process represented by the program section may emit special tokens on its stdout or stderr stream (respectively) which will effectively cause supervisor to emit a **PROCESS\_COMMUNICATION** event (see events for a description of events). The process communications protocol relies on two tags, one which commands supervisor to enter "capture mode" for the stream and one which commands it to exit. When a process stream enters "capture mode", data sent to the stream will be sent to a separate buffer in memory, the "capture buffer", which is allowed to contain a maximum of **capture\_maxbytes** bytes. During capture mode, when the buffer's length exceeds **capture\_maxbytes** bytes, the earliest data in the buffer is discarded to make room for new data. When a process stream exits capture mode, a **PROCESS\_COMMUNICATION** event subtype is emitted by supervisor, which may be intercepted by event listeners. The tag to begin "capture mode" in a process stream is **\Hello! ``` In this circumstance, **supervisord** will emit a **PROCESS\_COMMUNICATIONS\_STDOUT** event with data in the payload of "Hello!". An example of a script (written in Python) which emits a process communication event is in the **scripts** directory of the supervisor package, named **sample\_commevent.py**. The output of processes specified as "event listeners" (**\[eventlistener:x\]** sections) is not processed this way. Output from these processes cannot enter capture mode. ### Extending Supervisor's XML-RPC API Supervisor can be extended with new XML-RPC APIs. Several third-party plugins already exist that can be wired into your Supervisor configuration. You may additionally write your own. Extensible XML-RPC interfaces is an advanced feature, introduced in version 3.0. You needn't understand it unless you wish to use an existing third-party RPC interface plugin or if you wish to write your own RPC interface plugin. ### Configuring XML-RPC Interface Factories An additional RPC interface is configured into a supervisor installation by adding a **\[rpcinterface:x\]** section in the Supervisor configuration file. In the sample config file, there is a section which is named **\[rpcinterface:supervisor\]**. By default it looks like this: ``` [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface ``` This section *must* remain in the configuration for the standard setup of supervisor to work properly. If you don't want supervisor to do anything it doesn't already do out of the box, this is all you need to know about this type of section. However, if you wish to add additional XML-RPC interface namespaces to a configuration of supervisor, you may add additional **\[rpcinterface:foo\]** sections, where "foo" represents the namespace of the interface (from the web root), and the value named by **supervisor.rpcinterface\_factory** is a factory callable written in Python which should have a function signature that accepts a single positional argument **supervisord** and as many keyword arguments as required to perform configuration. Any key/value pairs defined within the **rpcinterface:foo** section will be passed as keyword arguments to the factory. Here's an example of a factory function, created in the package **my.package**. ``` def make_another_rpcinterface(supervisord, **config): retries = int(config.get('retries', 0)) another_rpc_interface = AnotherRPCInterface(supervisord, retries) return another_rpc_interface ``` And a section in the config file meant to configure it. ``` [rpcinterface:another] supervisor.rpcinterface_factory = my.package:make_another_rpcinterface retries = 1 ``` ### Glossary - **daemontools** A *process control system by D.J. Bernstein*. - **launchd** A *process control system used by Apple* as process 1 under Mac OS X. - **runit** A *process control system*. - **Superlance** A package which provides various event listener implementations that plug into Supervisor which can help monitor process memory usage and crash status: *http://pypi.python.org/pypi/superlance*. - **umask** Abbreviation of *user mask*: sets the file mode creation mask of the current process. See *http://en.wikipedia.org/wiki/Umask*. ## API DOCUMENTATION ### XML-RPC API Documentation To use the XML-RPC interface, connect to supervisor's HTTP port with any XML-RPC client library and run commands against it. An example of doing this using Python's **xmlrpclib** client library is as follows. ``` import xmlrpclib server = xmlrpclib.Server('http://localhost:9001/RPC2') ``` You may call methods against **supervisord** and its subprocesses by using the **supervisor** namespace. An example is provided below. ``` server.supervisor.getState() ``` You can get a list of methods supported by the **supervisord** XML-RPC interface by using the XML-RPC **system.listMethods** API: ``` server.system.listMethods() ``` You can see help on a method by using the **system.methodHelp** API against the method: ``` server.system.methodHelp('supervisor.shutdown') ``` The **supervisord** XML-RPC interface also supports the *XML-RPC multicall API*. You can extend **supervisord** functionality with new XML-RPC API methods by adding new top-level RPC interfaces as necessary. See rpcinterface\_factories. **NOTE:** Any XML-RPC method call may result in a fault response. This includes errors caused by the client such as bad arguments, and any errors that make **supervisord** unable to fulfill the request. Many XML-RPC client programs will raise an exception when a fault response is encountered. ### Status and Control - **class supervisor.rpcinterface.SupervisorNamespaceRPCInterface(supervisord)** - **getAPIVersion()** Return the version of the RPC API used by supervisord @return string version version id This API is versioned separately from Supervisor itself. The API version returned by **getAPIVersion** only changes when the API changes. Its purpose is to help the client identify with which version of the Supervisor API it is communicating. When writing software that communicates with this API, it is highly recommended that you first test the API version for compatibility before making method calls. **NOTE:** The **getAPIVersion** method replaces **getVersion** found in Supervisor versions prior to 3.0a1. It is aliased for compatibility but getVersion() is deprecated and support will be dropped from Supervisor in a future version. - **getSupervisorVersion()** Return the version of the supervisor package in use by supervisord @return string version version id - **getIdentification()** Return identifiying string of supervisord @return string identifier identifying string This method allows the client to identify with which Supervisor instance it is communicating in the case of environments where multiple Supervisors may be running. The identification is a string that must be set in Supervisor’s configuration file. This method simply returns that value back to the client. - **getState()** Return current state of supervisord as a struct @return struct A struct with keys int statecode, string statename This is an internal value maintained by Supervisor that determines what Supervisor believes to be its current operational state. Some method calls can alter the current state of the Supervisor. For example, calling the method supervisor.shutdown() while the station is in the RUNNING state places the Supervisor in the SHUTDOWN state while it is shutting down. The supervisor.getState() method provides a means for the client to check Supervisor's state, both for informational purposes and to ensure that the methods it intends to call will be permitted. The return value is a struct: ``` {'statecode': 1, 'statename': 'RUNNING'} ``` The possible return values are: | | | | | --- | --- | --- | | statecode | statename | Description | | 2 | FATAL | Supervisor has experienced a serious error. | | 1 | RUNNING | Supervisor is working normally. | | 0 | RESTARTING | Supervisor is in the process of restarting. | | -1 | SHUTDOWN | Supervisor is in the process of shutting down. | The **FATAL** state reports unrecoverable errors, such as internal errors inside Supervisor or system runaway conditions. Once set to **FATAL**, the Supervisor can never return to any other state without being restarted. In the **FATAL** state, all future methods except supervisor.shutdown() and supervisor.restart() will automatically fail without being called and the fault **FATAL\_STATE** will be raised. In the **SHUTDOWN** or **RESTARTING** states, all method calls are ignored and their possible return values are undefined. - **getPID()** Return the PID of supervisord @return int PID - **readLog(offset, length)** Read length bytes from the main log starting at offset @param int offset offset to start reading from. @param int length number of bytes to read from the log. @return string result Bytes of log It can either return the entire log, a number of characters from the tail of the log, or a slice of the log specified by the offset and length parameters: | | | | | --- | --- | --- | | Offset | Length | Behavior of **readProcessLog** | | Negative | Not Zero | Bad arguments. This will raise the fault **BAD\_ARGUMENTS**. | | Negative | Zero | This will return the tail of the log, or offset number of characters from the end of the log. For example, if **offset** = -4 and **length** = 0, then the last four characters will be returned from the end of the log. | | Zero or Positive | Negative | Bad arguments. This will raise the fault **BAD\_ARGUMENTS**. | | Zero or Positive | Zero | All characters will be returned from the **offset** specified. | | Zero or Positive | Positive | A number of characters length will be returned from the **offset**. | If the log is empty and the entire log is requested, an empty string is returned. If either offset or length is out of range, the fault **BAD\_ARGUMENTS** will be returned. If the log cannot be read, this method will raise either the **NO\_FILE** error if the file does not exist or the **FAILED** error if any other problem was encountered. **NOTE:** The readLog() method replaces readMainLog() found in Supervisor versions prior to 2.1. It is aliased for compatibility but readMainLog() is deprecated and support will be dropped from Supervisor in a future version. - **clearLog()** Clear the main log. @return boolean result always returns True unless error If the log cannot be cleared because the log file does not exist, the fault **NO\_FILE** will be raised. If the log cannot be cleared for any other reason, the fault **FAILED** will be raised. - **shutdown()** Shut down the supervisor process @return boolean result always returns True unless error This method shuts down the Supervisor daemon. If any processes are running, they are automatically killed without warning. Unlike most other methods, if Supervisor is in the **FATAL** state, this method will still function. - **restart()** Restart the supervisor process @return boolean result always return True unless error This method soft restarts the Supervisor daemon. If any processes are running, they are automatically killed without warning. Note that the actual UNIX process for Supervisor cannot restart; only Supervisor’s main program loop. This has the effect of resetting the internal states of Supervisor. Unlike most other methods, if Supervisor is in the **FATAL** state, this method will still function. ### Process Control - **class supervisor.rpcinterface.SupervisorNamespaceRPCInterface(supervisord)** - **getProcessInfo(name)** Get info about a process named name @param string name The name of the process (or 'group:name') @return struct result A structure containing data about the process The return value is a struct: ``` {'name': 'process name', 'group': 'group name', 'description': 'pid 18806, uptime 0:03:12' 'start': 1200361776, 'stop': 0, 'now': 1200361812, 'state': 1, 'statename': 'RUNNING', 'spawnerr': '', 'exitstatus': 0, 'logfile': '/path/to/stdout-log', # deprecated, b/c only 'stdout_logfile': '/path/to/stdout-log', 'stderr_logfile': '/path/to/stderr-log', 'pid': 1} ``` - **name** Name of the process - **group** Name of the process' group - **description** If process state is running description's value is process\_id and uptime. Example "pid 18806, uptime 0:03:12 ". If process state is stopped description's value is stop time. Example:"Jun 5 03:16 PM ". - **start** UNIX timestamp of when the process was started - **stop** UNIX timestamp of when the process last ended, or 0 if the process has never been stopped. - **now** UNIX timestamp of the current time, which can be used to calculate process up-time. - **state** State code, see process\_states. - **statename** String description of *state*, see process\_states. - **logfile** Deprecated alias for **stdout\_logfile**. This is provided only for compatibility with clients written for Supervisor 2.x and may be removed in the future. Use **stdout\_logfile** instead. - **stdout\_logfile** Absolute path and filename to the STDOUT logfile - **stderr\_logfile** Absolute path and filename to the STDOUT logfile - **spawnerr** Description of error that occurred during spawn, or empty string if none. - **exitstatus** Exit status (errorlevel) of process, or 0 if the process is still running. - **pid** UNIX process ID (PID) of the process, or 0 if the process is not running. - **getAllProcessInfo()** Get info about all processes @return array result An array of process status results Each element contains a struct, and this struct contains the exact same elements as the struct returned by **getProcessInfo**. If the process table is empty, an empty array is returned. - **startProcess(name, wait=True)** Start a process @param string name Process name (or **group:name**, or **group:\***) @param boolean wait Wait for process to be fully started @return boolean result Always true unless error - **startAllProcesses(wait=True)** Start all processes listed in the configuration file @param boolean wait Wait for each process to be fully started @return array result An array of process status info structs - **startProcessGroup(name, wait=True)** Start all processes in the group named 'name' @param string name The group name @param boolean wait Wait for each process to be fully started @return array result An array of process status info structs - **stopProcess(name, wait=True)** Stop a process named by name @param string name The name of the process to stop (or 'group:name') @param boolean wait Wait for the process to be fully stopped @return boolean result Always return True unless error - **stopProcessGroup(name, wait=True)** Stop all processes in the process group named 'name' @param string name The group name @param boolean wait Wait for each process to be fully stopped @return array result An array of process status info structs - **stopAllProcesses(wait=True)** Stop all processes in the process list @param boolean wait Wait for each process to be fully stopped @return array result An array of process status info structs - **sendProcessStdin(name, chars)** Send a string of chars to the stdin of the process name. If non-7-bit data is sent (unicode), it is encoded to utf-8 before being sent to the process' stdin. If chars is not a string or is not unicode, raise INCORRECT\_PARAMETERS. If the process is not running, raise NOT\_RUNNING. If the process' stdin cannot accept input (e.g. it was closed by the child process), raise NO\_FILE. @param string name The process name to send to (or 'group:name') @param string chars The character data to send to the process @return boolean result Always return True unless error - **sendRemoteCommEvent(type, data)** Send an event that will be received by event listener subprocesses subscribing to the RemoteCommunicationEvent. @param string type String for the "type" key in the event header @param string data Data for the event body @return boolean Always return True unless error - **reloadConfig()** Reload configuration @return boolean result always return True unless error - **addProcessGroup(name)** Update the config for a running process from config file. @param string name name of process group to add @return boolean result true if successful - **removeProcessGroup(name)** Remove a stopped process from the active configuration. @param string name name of process group to remove @return boolean result Indicates whether the removal was successful ### Process Logging - **class supervisor.rpcinterface.SupervisorNamespaceRPCInterface(supervisord)** - **readProcessStdoutLog(name, offset, length)** Read length bytes from name's stdout log starting at offset @param string name the name of the process (or 'group:name') @param int offset offset to start reading from. @param int length number of bytes to read from the log. @return string result Bytes of log - **readProcessStderrLog(name, offset, length)** Read length bytes from name's stderr log starting at offset @param string name the name of the process (or 'group:name') @param int offset offset to start reading from. @param int length number of bytes to read from the log. @return string result Bytes of log - **tailProcessStdoutLog(name, offset, length)** Provides a more efficient way to tail the (stdout) log than readProcessStdoutLog(). Use readProcessStdoutLog() to read chunks and tailProcessStdoutLog() to tail. Requests (length) bytes from the (name)'s log, starting at (offset). If the total log size is greater than (offset + length), the overflow flag is set and the (offset) is automatically increased to position the buffer at the end of the log. If less than (length) bytes are available, the maximum number of available bytes will be returned. (offset) returned is always the last offset in the log +1. @param string name the name of the process (or 'group:name') @param int offset offset to start reading from @param int length maximum number of bytes to return @return array result \[string bytes, int offset, bool overflow\] - **tailProcessStderrLog(name, offset, length)** Provides a more efficient way to tail the (stderr) log than readProcessStderrLog(). Use readProcessStderrLog() to read chunks and tailProcessStderrLog() to tail. Requests (length) bytes from the (name)'s log, starting at (offset). If the total log size is greater than (offset + length), the overflow flag is set and the (offset) is automatically increased to position the buffer at the end of the log. If less than (length) bytes are available, the maximum number of available bytes will be returned. (offset) returned is always the last offset in the log +1. @param string name the name of the process (or 'group:name') @param int offset offset to start reading from @param int length maximum number of bytes to return @return array result \[string bytes, int offset, bool overflow\] - **clearProcessLogs(name)** Clear the stdout and stderr logs for the named process and reopen them. @param string name The name of the process (or 'group:name') @return boolean result Always True unless error - **clearAllProcessLogs()** Clear all process log files @return array result An array of process status info structs ### System Methods - **class supervisor.xmlrpc.SystemNamespaceRPCInterface(namespaces)** - **listMethods()** Return an array listing the available method names @return array result An array of method names available (strings). - **methodHelp(name)** Return a string showing the method's documentation @param string name The name of the method. @return string result The documentation for the method name. - **methodSignature(name)** Return an array describing the method signature in the form \[rtype, ptype, ptype...\] where rtype is the return data type of the method, and ptypes are the parameter data types that the method accepts in method argument order. @param string name The name of the method. @return array result The result. - **multicall(calls)** Process an array of calls, and return an array of results. Calls should be structs of the form {'methodName': string, 'params': array}. Each result will either be a single-item array containing the result value, or a struct of the form {'faultCode': int, 'faultString': string}. This is useful when you need to make lots of small calls without lots of round trips. @param array calls An array of call requests @return array result An array of results ## PLUGINS ## INDICES AND TABLES - • genindex - • modindex - • search ## AUTHOR This man page was created by Orestis Ioannou \ using the official documentation. ## COPYRIGHT 2004-2015, Agendaless Consulting and Contributors