NAME
srec_ti_txt - Texas Instruments ti‐txt (MSP430) file format
DESCRIPTION
The ti‐TXT format is used by the Texas Instruments MSP430 familty programming adapter.
The TI‐TXT hex format supports 16‐bit hexadecimal data. It consists of one or more sections, followed by the end‐of‐file indicator.
Each section consistes of an at (@) sign followed a execution start address (in hexadecimal), and newline, and then data bytes (in hexadecimal). The section address is followed by a newline. There are to be 16 data bytes per line, except for the last line in a section.
The end‐of‐file indicator is the letter q followed by a newline. The end‐of‐file indicator mandatory.
Size Multiplier
In general, binary data will expand in sized by approximately 3.0 times when represented with this format.
EXAMPLE
Here is an example ti‐txt file taken from the reference below:
@F00031 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E321 00 3F 40 E8 FD 1F 83 FE 23 F9 3F@FFFE00 F0q
SEE ALSO
http://www.ti.com/lit/pdf/slau101, section A.2. Note: the portion which says addresses must be even, and the number of data bytes in a section must be even, is wrong.
COPYRIGHT
srec_ti_txt version 1.64
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller
The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_ti_txt -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_ti_txt -VERSion License' command.
MAINTAINER
| Scott Finneran | E‐Mail: | [email protected] |
| Peter Miller | E‐Mail: | [email protected] |