NAME
snmp_usm – user-based security module for bsnmpd(1)
LIBRARY
(begemotSnmpdModulePath."usm" = /usr/lib/snmp_usm.so)
DESCRIPTION
The snmp_usm module implements SNMPv3 User-Based Security Model MIB as defined in RFC 3414. The module is used to manage the internal list of SNMPv3 USM active users in bsnmpd. The module must be loaded for bsnmpd to receive and process SNMPv3 USM PDUs correctly.
IMPLEMENTATION NOTES
A short description of the objects in the MIB follows.
- usmStats
-
The subtree contains statistics for the User-based Security Model PDU processing. The statistics are reset each time the module is loaded.
- usmUserSpinLock
-
An advisory lock used to coordinate several Command Generator Applications when altering the SNMP USM users.
- usmUserTable
-
The table contains all SNMP USM users configured in bsnmpd. The table contains the following objects
- usmUserEngineID
-
An SNMP engine's administratively-unique identifier. Must be set to the same Engine ID as bsnmpd so that the user will actually be allowed to communicate with the daemon. The column is used as entry key and is not accessible for GET or SET operations.
- usmUserName
-
The USM user name. The second entry key, again not accessible for GET or SET operations.
- usmUserSecurityName
-
The column has the exact same value as the usmUserName column, however is accessible for GET operations.
- usmUserCloneFrom
-
A GET on this column will return an empty OID. SET operations are currently not supported.
- usmUserAuthProtocol
-
The value of this column contains the OID corresponding to the authentication protocol used by the USM user. The following protocols and their OIDs are known to snmp_usm module
- NoAuthProtocol 1.3.6.1.6.3.10.1.1.1
- HMACMD5AuthProtocol 1.3.6.1.6.3.10.1.1.2
- HMACSHAAuthProtocol 1.3.6.1.6.3.10.1.1.3
- usmUserAuthKeyChange, usmUserOwnAuthKeyChange
-
These columns may be used to change the user's authentication key.
- usmUserPrivProtocol
-
The value of this column contains the OID corresponding to the privacy protocol used by the USM user. The following protocols and their OIDs are known to snmp_usm module
- NoPrivProtocol 1.3.6.1.6.3.10.1.2.1
- DESPrivProtoco 1.3.6.1.6.3.10.1.2.2
- AesCfb128Protocol 1.3.6.1.6.3.10.1.2.4
- usmUserPrivKeyChange, usmUserOwnPrivKeyChange
-
These columns may be used to change the user's privacy key.
- usmUserPublic
-
An arbitrary octet string that may be modified to confirm a SET operation on any of the columns was successful.
- usmUserStorageType
-
This column always has either of two values. Entries created via bsnmpd's configuration file always have this column set to readOnly (5) and it is not possible to modify those entries. Entries created by Command Generator Applications always have this column set to volatile(2) and such entries are lost when the module is restarted. A SET operation on this column is not allowed.
- usmUserStatus
-
This column is used to create new USM user entries or delete existing ones from the table.
FILES
- /usr/share/snmp/defs/usm_tree.def
-
The description of the MIB tree implemented by snmp_usm.
SEE ALSO
STANDARDS
IETF RFC 3414
AUTHORS
Shteryana Shopova ⟨[email protected]⟩