NAME
snd_mss – Microsoft Sound System ISA PnP/non-PnP bridge device driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device sound device snd_mss
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
snd_mss_load="YES"
Non-PnP cards require the following lines in device.hints(5):
hint.pcm.0.at="isa" hint.pcm.0.irq="10" hint.pcm.0.drq="1" hint.pcm.0.flags="0x0"
DESCRIPTION
The snd_mss bridge driver allows the generic audio driver, sound(4), to attach to the supported audio devices.
HARDWARE
The snd_mss driver supports the following audio devices:
-
AD1845
-
AD1848
-
Aztech 2320
-
CMedia CMI8330
-
Crystal Semiconductor CS4231
-
Crystal Semiconductor CS4232
-
Crystal Semiconductor CS4234
-
Crystal Semiconductor CS4235
-
Crystal Semiconductor CS4236
-
Crystal Semiconductor CS4237
-
ENSONIQ SoundscapeVIVO ENS4081
-
NeoMagic 256AV (non-AC97)
-
OPTi 924
-
OPTi 925
-
OPTi 930
-
OPTi 931
-
OPTi 933
-
Yamaha OPL-SA2
-
Yamaha OPL-SA3
SEE ALSO
HISTORY
The snd_mss device driver first appeared in FreeBSD 2.2.6.
AUTHORS
This manual page was written by Joel Dahl ⟨[email protected]⟩.