carta

slic3r-prusa(1)

slic3r-prusa1

Slice 3d models into g-code for 3d-printing

Usage

slic3r [OPTIONS] [file.stl] [file2.stl] ...

Overview

Slic3r is a STL-to-GCODE translator for RepRap 3D printers written by Alessandro Ranellucci <[email protected]> - http://slic3r.org/

Options

Common options:

--help: Output usage screen and exit

--version: Output the version of Slic3r and exit

--save <file>: Save configuration to the specified file

--load <file>: Load configuration from the specified file. It can be used more than once to load options from multiple files.

-o, --output <file>: File to output gcode to (by default, the file will be saved into the same directory as the input file using the --output-filename-format to generate the filename.) If a directory is specified for this option, the output will be saved under that directory, and the filename will be generated by --output-filename-format.

Non-slicing actions (no G-code will be generated):

--repair: Repair given STL files and save them as <name>_fixed.obj

--cut <z>: Cut given input files at given Z (relative) and export them as <name>_upper.stl and <name>_lower.stl

--split: Split the shells contained in given STL file into several STL files

--info: Output information about the supplied file(s) and exit

-j, --threads <num> Number of threads to use (1+, default: 2)

GUI options:

--no-plater: Disable the plater tab

--gui-mode: Overrides the configured mode (simple/expert)

--autosave <file>: Automatically export current configuration to the specified file

Output options:

--output-filename-format: Output file name format; all config options enclosed in brackets will be replaced by their values, as well as [input_filename_base] and [input_filename] (default: [input_filename_base].gcode)

--post-process: Generated G-code will be processed with the supplied script; call this more than once to process through multiple scripts.

--export-svg: Export a SVG file containing slices instead of G-code.

-m, --merge: If multiple files are supplied, they will be composed into a single print rather than processed individually.

Printer options:

--nozzle-diameter: Diameter of nozzle in mm (default: 0.5)

--print-center: Coordinates in mm of the point to center the print around (default: 100,100)

--z-offset: Additional height in mm to add to vertical coordinates (+/-, default: 0)

--gcode-flavor: The type of G-code to generate (reprap/teacup/makerware/sailfish/mach3/no-extrusion, default: reprap)

--use-relative-e-distances Enable this to get relative E values (default: no)

--use-firmware-retraction: Enable firmware-controlled retraction using G10/G11 (default: no)

--use-volumetric-e: Express E in cubic millimeters and prepend M200 (default: no)

--gcode-arcs: Use G2/G3 commands for native arcs (experimental, not supported by all firmwares)

--gcode-comments: Make G-code verbose by adding comments (default: no)

--vibration-limit: Limit the frequency of moves on X and Y axes (Hz, set zero to disable; default: 0)

--pressure-advance: Adjust pressure using the experimental advance algorithm (K constant, set zero to disable; default: 0)

Filament options:

--filament-diameter: Diameter in mm of your raw filament (default: 3)

--extrusion-multiplier: Change this to alter the amount of plastic extruded. There should be very little need to change this value, which is only useful to compensate for filament packing (default: 1)

--temperature: Extrusion temperature in degree Celsius, set 0 to disable (default: 200)

--first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,: set 0 to disable (default: same as --temperature)

--bed-temperature: Heated bed temperature in degree Celsius, set 0 to disable (default: 0)

--first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,: set 0 to disable (default: same as --bed-temperature)

Speed options:

--travel-speed: Speed of non-print moves in mm/s (default: 130)

--perimeter-speed: Speed of print moves for perimeters in mm/s (default: 30)

--small-perimeter-speed: Speed of print moves for small perimeters in mm/s or % over perimeter speed (default: 30)

--external-perimeter-speed: Speed of print moves for the external perimeter in mm/s or % over perimeter speed (default: 70%)

--infill-speed: Speed of print moves in mm/s (default: 60)

--solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed: (default: 60)

--top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed: (default: 50)

--support-material-speed: Speed of support material print moves in mm/s (default: 60)

--support-material-interface-speed: Speed of support material interface print moves in mm/s or % over support material speed (default: 100%)

--bridge-speed: Speed of bridge print moves in mm/s (default: 60)

--gap-fill-speed: Speed of gap fill print moves in mm/s (default: 20)

--first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute: value or as a percentage over normal speeds (default: 30%)

Acceleration options:

--perimeter-acceleration: Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero to disable; default: 0)

--infill-acceleration: Overrides firmware's default acceleration for infill. (mm/s^2, set zero to disable; default: 0)

--bridge-acceleration: Overrides firmware's default acceleration for bridges. (mm/s^2, set zero to disable; default: 0)

--first-layer-acceleration: Overrides firmware's default acceleration for first layer. (mm/s^2, set zero to disable; default: 0)

--default-acceleration: Acceleration will be reset to this value after the specific settings above have been applied. (mm/s^2, set zero to disable; default: 130)

Accuracy options:

--layer-height: Layer height in mm (default: 0.4)

--first-layer-height Layer height for first layer (mm or %, default: 0.35)

--infill-every-layers: Infill every N layers (default: 1)

--solid-infill-every-layers: Force a solid layer every N layers (default: 0)

Print options:

--perimeters: Number of perimeters/horizontal skins (range: 0+, default: 3)

--top-solid-layers: Number of solid layers to do for top surfaces (range: 0+, default: 3)

--bottom-solid-layers: Number of solid layers to do for bottom surfaces (range: 0+, default: 3)

--solid-layers: Shortcut for setting the two options above at once

--fill-density: Infill density (range: 0%-100%, default: 40%)

--fill-angle: Infill angle in degrees (range: 0-90, default: 45)

--fill-pattern: Pattern to use to fill non-solid layers (default: honeycomb)

--external-fill-pattern Pattern to use to fill solid layers (default: rectilinear)

--start-gcode: Load initial G-code from the supplied file. This will overwrite the default command (home all axes [G28]).

--end-gcode: Load final G-code from the supplied file. This will overwrite the default commands (turn off temperature [M104 S0], home X axis [G28 X], disable motors [M84]).

--layer-gcode: Load layer-change G-code from the supplied file (default: nothing).

--toolchange-gcode: Load tool-change G-code from the supplied file (default: nothing).

--seam-position: Position of loop starting points (random/nearest/aligned, default: aligned).

--external-perimeters-first Reverse perimeter order. (default: no)

--spiral-vase: Experimental option to raise Z gradually when printing single-walled vases (default: no)

--only-retract-when-crossing-perimeters: Disable retraction when travelling between infill paths inside the same island. (default: no)

--solid-infill-below-area: Force solid infill when a region has a smaller area than this threshold (mm^2, default: 70)

--infill-only-where-needed: Only infill under ceilings (default: no)

--infill-first: Make infill before perimeters (default: no)

: Quality options (slower slicing):

--extra-perimeters: Add more perimeters when needed (default: yes)

--avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no)

--thin-walls: Detect single-width walls (default: yes)

--overhangs: Experimental option to use bridge flow, speed and fan for overhangs (default: yes)

Support material options:

--support-material: Generate support material for overhangs

--support-material-threshold: Overhang threshold angle (range: 0-90, set 0 for automatic detection, default: 0)

--support-material-pattern: Pattern to use for support material (default: pillars)

--support-material-spacing: Spacing between pattern lines (mm, default: 2.5)

--support-material-angle: Support material angle in degrees (range: 0-90, default: 0)

--support-material-interface-layers: Number of perpendicular layers between support material and object (0+, default: 3)

--support-material-interface-spacing: Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: 0)

--raft-layers: Number of layers to raise the printed objects by (range: 0+, default: 0)

--support-material-enforce-layers: Enforce support material on the specified number of layers from bottom, regardless of --support-material and threshold (0+, default: 0)

--dont-support-bridges: Experimental option for preventing support material from being generated under bridged areas (default: yes)

Retraction options:

--retract-length: Length of retraction in mm when pausing extrusion (default: 1)

--retract-speed: Speed for retraction in mm/s (default: 30)

--retract-restart-extra: Additional amount of filament in mm to push after compensating retraction (default: 0)

--retract-before-travel: Only retract before travel moves of this length in mm (default: 2)

--retract-lift: Lift Z by the given distance in mm when retracting (default: 0)

--retract-layer-change: Enforce a retraction before each Z move (default: yes)

--wipe: Wipe the nozzle while doing a retraction (default: no)

: Retraction options for multi-extruder setups:

--retract-length-toolchange: Length of retraction in mm when disabling tool (default: 1)

--retract-restart-extra-toolchnage: Additional amount of filament in mm to push after switching tool (default: 0)

Cooling options:

--cooling: Enable fan and cooling control

--min-fan-speed: Minimum fan speed (default: 35%)

--max-fan-speed: Maximum fan speed (default: 100%)

--bridge-fan-speed: Fan speed to use when bridging (default: 100%)

--fan-below-layer-time Enable fan if layer print time is below this approximate number: of seconds (default: 60)

--slowdown-below-layer-time Slow down if layer print time is below this approximate number: of seconds (default: 30)

--min-print-speed: Minimum print speed (mm/s, default: 10)

--disable-fan-first-layers Disable fan for the first N layers (default: 1)

--fan-always-on: Keep fan always on at min fan speed, even for layers that don't need cooling

Skirt options:

--skirts: Number of skirts to draw (0+, default: 1)

--skirt-distance: Distance in mm between innermost skirt and object (default: 6)

--skirt-height: Height of skirts to draw (expressed in layers, 0+, default: 1)

--min-skirt-length: Generate no less than the number of loops required to consume this length of filament on the first layer, for each extruder (mm, 0+, default: 0)

--brim-width: Width of the brim that will get added to each object to help adhesion (mm, default: 0)

Transform options:

--scale: Factor for scaling input object (default: 1)

--rotate: Rotation angle in degrees (0-360, default: 0)

--duplicate: Number of items with auto-arrange (1+, default: 1)

--duplicate-grid: Number of items with grid arrangement (default: 1,1)

--duplicate-distance: Distance in mm between copies (default: 0)

--xy-size-compensation: Grow/shrink objects by the configured absolute distance (mm, default: 0)

Sequential printing options:

--complete-objects: When printing multiple objects and/or copies, complete each one before starting the next one; watch out for extruder collisions (default: no)

--extruder-clearance-radius Radius in mm above which extruder won't collide with anything: (default: 20)

--extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from: extruder tip and carriage bottom (default: 20)

Miscellaneous options:

--notes: Notes to be added as comments to the output file

--resolution: Minimum detail resolution (mm, set zero for full resolution, default: 0)

: Flow options (advanced):

--extrusion-width: Set extrusion width manually; it accepts either an absolute value in mm (like 0.65) or a percentage over layer height (like 200%)

--first-layer-extrusion-width: Set a different extrusion width for first layer

--perimeter-extrusion-width: Set a different extrusion width for perimeters

--external-perimeter-extrusion-width: Set a different extrusion width for external perimeters

--infill-extrusion-width: Set a different extrusion width for infill

--solid-infill-extrusion-width: Set a different extrusion width for solid infill

--top-infill-extrusion-width: Set a different extrusion width for top infill

--support-material-extrusion-width: Set a different extrusion width for support material

--bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)

Multiple extruder options:

--extruder-offset: Offset of each extruder, if firmware doesn't handle the displacement (can be specified multiple times, default: 0x0)

--perimeter-extruder: Extruder to use for perimeters (1+, default: 1)

--infill-extruder: Extruder to use for infill (1+, default: 1)

--solid-infill-extruder: Extruder to use for infill (1+, default: 1)

--support-material-extruder: Extruder to use for support material (1+, default: 1)

--support-material-interface-extruder: Extruder to use for support material interface (1+, default: 1)

--ooze-prevention: Drop temperature and park extruders outside a full skirt for automatic wiping (default: no)

--standby-temperature-delta: Temperature difference to be applied when an extruder is not active and --ooze-prevention is enabled (default: -5)

$ slic3r-prusa

Pick options to build a command. 122 options jk move x pick y copy / filter [] section