silan1

Usage

Overview

silan - Audiofile Silence Analyzer.

Options

-h, --help

display this help and exit

-b, --bounds

skip silence mid file. print start/end boundaries only.

-B, --fastbounds

same as -b, except the sound-off is detected by decoding backwards from the end. This is much faster but also inacurate.

-f, --format <format>

specify output format (default: 'txt')

-F, --filter <float>

high-pass filter coefficient (default:0.98) disable: 1.0; range 0 < val <= 1.0

-i, --include-initial

display initial state (don't assume initial silence at start).

-o, --output <filename>

write data to file instead of stdout

-p, --progress

show progress info on stderr

-q, --quiet

inhibit error messages

-s, --threshold <float>

RMS signal threshold (default 0.001 ^= -60dB) postfix with 'd' to specify decibels

-t, --holdoff <float>

holdoff time in seconds (default 0.5)

-u, --unit <unit>

specify output unit (default: 'seconds')

-v, --verbose

increase debug-level (can be used multiple times)

-V, --version

print version information and exit

This application reads a single audio file and analyzes it for silent periods. Timestamps/ranges of silence are printed to standard output.

Valid output formats are: txt, JSON, audacity (label file)

Valid output units are: samples, seconds or bytes (audacity format uses seconds regardless).

Sound is detected if the signal level exceeds a given threshold for a duration of at least <holdoff> time. Note that the returned timestamps are corrected for the holdoff-time.

The fast boundary scan can decrease the time it takes to analyze a file at the cost of accuracy. Use --fastbounds with care. Due to low-pass filtering and RMS calculation the results will be different (+- .1 sec), furthermore some codecs are not suitable for backwards decoding or sample-accurate seeking and may skew the timestamp by one second or more. The fast boundary scan mode requires a seekable file and does not work with streams.