--- name: "run0" section: "1" platform: "linux" package: "systemd" version: "262.1-1" release: "Arch Linux 2026-11-01" platforms: ["linux"] url: "https://new.carta.tech/run0" --- # run0(1) Elevate privileges ## NAME run0 - Elevate privileges ## SYNOPSIS **run0** \[OPTIONS...\] \[COMMAND...\] ## DESCRIPTION **run0** may be used to temporarily and interactively acquire elevated or different privileges. It serves a similar purpose as [**sudo**(8)](/sudo/8.md), but operates differently in a couple of key areas: • No execution or security context credentials are inherited from the caller into the invoked commands, as they are invoked from a fresh, isolated service forked off by the service manager. • Authentication takes place via **polkit**\[1\], thus isolating the authentication prompt from the terminal (if possible). • An independent pseudo-tty is allocated for the invoked command, detaching its lifecycle and isolating it for security. • No SetUID/SetGID file access bit functionality is used for the implementation. Altogether this should provide a safer and more robust alternative to the **sudo** mechanism, in particular in OS environments where SetUID/SetGID support is not available (for example by setting the *NoNewPrivileges=* variable in [**systemd-system.conf**(5)](/systemd-system.conf/5.md)). Any session invoked via **run0** will run through the "systemd-run0" PAM stack. Note that **run0** is implemented as an alternative multi-call invocation of [**systemd-run**(1)](/systemd-run/1.md). That is, **run0** is a symbolic link to **systemd-run** executable file, and it behaves as **run0** if it is invoked through the symbolic link, otherwise behaves as **systemd-run**. Note that TTY isolation as provided by the default value of the **--pty** option is a core feature of **run0**. Redirecting terminals must therefore be done with care, avoiding giving such control to untrusted programs. ## OPTIONS The following options are understood: **--unit=** Use this unit name instead of an automatically generated one. Added in version 256. **--property=** Sets a property of the service unit that is created. This option takes an assignment in the same format as [**systemctl**(1)](/systemctl/1.md)'s **set-property** command. Added in version 256. **--description=** Provide a description for the service unit that is invoked. If not specified, the command itself will be used as a description. See *Description=* in [**systemd.unit**(5)](/systemd.unit/5.md). Added in version 256. **--slice=** Make the new .service unit part of the specified slice, instead of user.slice. This option conflicts with **--lightweight=** and **--area=**, and implies "XDG\_SESSION\_CLASS=none", to keep the new process within the specified slice instead of a new session scope. Added in version 256. - **--slice-inherit** Make the new .service unit part of the slice the **run0** itself has been invoked in. This option may be combined with **--slice=**, in which case the slice specified via **--slice=** is placed within the slice the **run0** command is invoked in. Also conflicts with **--lightweight=** and **--area=** and implies "XDG\_SESSION\_CLASS=none", similar to **--slice=**. Example: consider **run0** being invoked in the slice foo.slice, and the **--slice=** argument is bar. The unit will then be placed under foo-bar.slice. Added in version 256. **--user=**, **-u**, **--group=**, **-g** Switches to the specified user/group. If not specified defaults to "root", unless **--area=** or **--empower** are used (see below), in which case this defaults to the invoking user. Added in version 256. **--nice=** Runs the invoked session with the specified nice level. Added in version 256. **--chdir=**, **-D** Runs the invoked session with the specified working directory. If not specified defaults to the client's current working directory if switching to the root user, or the target user's home directory otherwise. Added in version 256. - **-k**, **--reset-timestamp** Revokes temporary polkit authorization for this terminal, if present. Added in version 262. - **-K**, **--remove-timestamp** Revokes all temporary polkit authorizations for this user session. Added in version 262. - **-v**, **--validate** Request authorization from polkit. Can be used to create a temporary authorization without running a command. Added in version 262. - **--via-shell** Invokes the target user's login shell and runs the specified command (if any) via it. Added in version 258. - **-i** Shortcut for **--via-shell --chdir='~'**. Added in version 258. - **--setenv=***NAME***\[=***VALUE***\]** Runs the invoked session with the specified environment variable set. This parameter may be used more than once to set multiple variables. When "=" and *VALUE* are omitted, the value of the variable with the same name in the invoking environment will be used. Added in version 256. - **--background=***COLOR* Change the terminal background color to the specified ANSI color as long as the session lasts. If not specified, the background will be tinted in a reddish tone when operating as root, and in a yellowish tone when operating under another UID, as reminder of the changed privileges. The color specified should be an ANSI X3.64 SGR background color, i.e. strings such as "40", "41", ..., "47", "48;2;...", "48;5;...". See **ANSI Escape Code (Wikipedia)**\[2\] for details. Set to an empty string to disable. Example: "--background=44" for a blue background. Added in version 256. - **--pty**, **--pty-late**, **--pipe** Request allocation of a pseudo TTY for the **run0** session (in case of **--pty** or **--pty-late**), or request passing the caller's STDIO file descriptors directly through (in case of **--pipe**). **--pty-late** is very similar to **--pty** but begins the TTY processing only once unit startup is complete, leaving input to any passwords/polkit agents until that time. If neither switch is specified, or if both **--pipe** and one of **--pty**/**--pty-late** are specified, the mode will be picked automatically: if standard input, standard output, and standard error output are all connected to a TTY then a pseudo TTY is allocated (in **--pty-late** mode unless **--no-ask-password** is specified in which case **--pty** is selected), otherwise the relevant file descriptors are passed through directly. As mentioned above, TTY isolation as implemented by the default value of this option is crucial for security, so care must be taken when overriding it. **--pty** and **--pipe** were added in v257. **--pty-late** was added in v258. - **--shell-prompt-prefix=***STRING* Set a shell prompt prefix string. This ultimately controls the *$SHELL\_PROMPT\_PREFIX* environment variable for the invoked program, which is typically imported into the shell prompt. By default – if emojis are supported –, a superhero emoji is shown (🦸). This default may also be changed (or turned off) by passing the *$SYSTEMD\_RUN\_SHELL\_PROMPT\_PREFIX* environment variable to *run0*, see below. Set to an empty string to disable shell prompt prefixing. Added in version 257. - **--lightweight=***BOOLEAN* Controls whether to activate the per-user service manager for the target user. By default (unset or set to **auto**), if the target user is "root" or a system user the per-user service manager is not activated as effect of the **run0** invocation, otherwise it is. This ultimately controls the *$XDG\_SESSION\_CLASS* environment variable [**pam\_systemd**(8)](/pam_systemd/8.md) respects. Added in version 258. - **--area=***AREA* Controls the "area" of the target account to log into. Areas are secondary home directories within the primary home directory of the target user, i.e. logging into area "foobar" of an account translates to *$HOME* being set to ~/Areas/foobar on login. If this option is used, the default user to transition to changes from root to the calling user's (but **--user=** takes precedence, see above). Or in other words, just specifying an area without a user is a mechanism to create a new session of the calling user, just with a different area. This ultimately controls the *$XDG\_AREA* environment variable [**pam\_systemd**(8)](/pam_systemd/8.md) respects. For details on the area concept see [**pam\_systemd\_home**(8)](/pam_systemd_home/8.md). Added in version 258. - **--empower** If specified, run0 will elevate the privileges of the selected user (using **--user=**) or the current user if no user is explicitly selected. Currently this means we give the invoked process all available capabilities and add the "empower" group as a supplemental group (for which all polkit actions are allowed by default), but other privileges may be granted in the future as well when using this option. Note that other (unprivileged) processes of the selected user will have privileges over the invoked process. Consider not using this option in an environment where there might be malicious processes running as the selected user. Added in version 259. - **--same-root-dir** Execute the **run0** session in the same root directory that the **run0** command is executed in. Added in version 259. **--machine=** Execute operation in a local container. Specify a container name to connect to. Added in version 256. - **-n**, **--non-interactive** Equivalent to **--no-ask-password**. Added in version 262. - **--no-ask-password** Do not query the user for authentication for privileged operations. - **-h**, **--help** Print a short help text and exit. - **-V**, **--version** Print a short version string and exit. - **--no-pager** Do not pipe output into a pager. This currently only applies to **--help**. (The pager is not started during normal operation.) Added in version 262. All command line arguments after the first non-option argument become part of the command line of the launched process. If no command line is specified an interactive shell is invoked. The shell to invoke may be controlled through **--via-shell** - when specified the target user's shell is used - or **--setenv=SHELL=...**. By default, the *originating user's* shell is executed if operating locally, or /bin/sh when operating with **--machine=**. Note that unlike **sudo**, **run0** always spawns shells with login shell semantics, regardless of **-i**. ## EXIT STATUS On success, 0 is returned. If **run0** failed to start the session or the specified command fails, a non-zero return value will be returned. ## ENVIRONMENT VARIABLES As with **systemd-run**, the session will inherit the system environment from the service manager. In addition, the following environment variables will be set: *$TERM* Copied from the *$TERM* of the caller. Can be overridden with **--setenv=** Added in version 256. *$SUDO\_USER* Set to the username of the originating user. Added in version 256. *$SUDO\_UID* Set to the numeric UNIX user id of the originating user. Added in version 256. *$SUDO\_GID* Set to the primary numeric UNIX group id of the originating session. Added in version 256. *$SHELL\_PROMPT\_PREFIX* By default, set to the superhero emoji (if supported), but may be overridden with the *$SYSTEMD\_RUN\_SHELL\_PROMPT\_PREFIX* environment variable (see below), or the **--shell-prompt-prefix=** switch (see above). Added in version 257. The following variables may be passed to **run0**: *$SYSTEMD\_RUN\_SHELL\_PROMPT\_PREFIX* If set, overrides the default shell prompt prefix that **run0** sets for the invoked shell (the superhero emoji). Set to an empty string to disable shell prompt prefixing. Added in version 257. ## SEE ALSO [**systemd**(1)](/systemd/1.md), [**systemd-run**(1)](/systemd-run/1.md), [**sudo**(8)](/sudo/8.md), [**machinectl**(1)](/machinectl/1.md), [**pam\_systemd**(8)](/pam_systemd/8.md) ## NOTES - 1\. polkit https://www.freedesktop.org/wiki/Software/polkit - 2\. ANSI Escape Code (Wikipedia) https://en.wikipedia.org/wiki/ANSI\_escape\_code#SGR\_(Select\_Graphic\_Rendition)\_parameters