--- name: "rte_pmd_ixgbe_set_vf_split_drop_en" section: "3" platform: "linux" package: "dpdk-doc" version: "24.11.4-0+deb13u1" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/rte_pmd_ixgbe.h" --- # rte\_pmd\_ixgbe\_set\_vf\_split\_drop\_en(3) Part of [rte\_pmd\_ixgbe.h(3)](/rte_pmd_ixgbe.h/3.md). ## NAME rte\_pmd\_ixgbe.h ## SYNOPSIS `#include `\ `#include `\ `#include `\ ### Data Structures struct **rte\_pmd\_ixgbe\_mb\_event\_param**\ ### Enumerations enum **rte\_pmd\_ixgbe\_mb\_event\_rsp** { **RTE\_PMD\_IXGBE\_MB\_EVENT\_NOOP\_ACK**, **RTE\_PMD\_IXGBE\_MB\_EVENT\_NOOP\_NACK**, **RTE\_PMD\_IXGBE\_MB\_EVENT\_PROCEED**, **RTE\_PMD\_IXGBE\_MB\_EVENT\_MAX** }\ ### Functions int **rte\_pmd\_ixgbe\_ping\_vf** (uint16\_t port, uint16\_t vf)\ int **rte\_pmd\_ixgbe\_set\_vf\_mac\_addr** (uint16\_t port, uint16\_t vf, struct rte\_ether\_addr \*mac\_addr)\ int **rte\_pmd\_ixgbe\_set\_vf\_vlan\_anti\_spoof** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_mac\_anti\_spoof** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_vlan\_insert** (uint16\_t port, uint16\_t vf, uint16\_t vlan\_id)\ int **rte\_pmd\_ixgbe\_set\_tx\_loopback** (uint16\_t port, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_all\_queues\_drop\_en** (uint16\_t port, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_split\_drop\_en** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_vlan\_stripq** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_macsec\_enable** (uint16\_t port, uint8\_t en, uint8\_t rp)\ int **rte\_pmd\_ixgbe\_macsec\_disable** (uint16\_t port)\ int **rte\_pmd\_ixgbe\_macsec\_config\_txsc** (uint16\_t port, uint8\_t \*mac)\ int **rte\_pmd\_ixgbe\_macsec\_config\_rxsc** (uint16\_t port, uint8\_t \*mac, uint16\_t pi)\ int **rte\_pmd\_ixgbe\_macsec\_select\_txsa** (uint16\_t port, uint8\_t idx, uint8\_t an, uint32\_t pn, uint8\_t \*key)\ int **rte\_pmd\_ixgbe\_macsec\_select\_rxsa** (uint16\_t port, uint8\_t idx, uint8\_t an, uint32\_t pn, uint8\_t \*key)\ int **rte\_pmd\_ixgbe\_set\_vf\_rxmode** (uint16\_t port, uint16\_t vf, uint16\_t rx\_mask, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_rx** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_tx** (uint16\_t port, uint16\_t vf, uint8\_t on)\ int **rte\_pmd\_ixgbe\_set\_vf\_vlan\_filter** (uint16\_t port, uint16\_t vlan, uint64\_t vf\_mask, uint8\_t vlan\_on)\ int **rte\_pmd\_ixgbe\_set\_vf\_rate\_limit** (uint16\_t port, uint16\_t vf, uint32\_t tx\_rate, uint64\_t q\_msk)\ int **rte\_pmd\_ixgbe\_set\_tc\_bw\_alloc** (uint16\_t port, uint8\_t tc\_num, uint8\_t \*bw\_weight)\ int **rte\_pmd\_ixgbe\_bypass\_init** (uint16\_t port)\ int **rte\_pmd\_ixgbe\_bypass\_state\_show** (uint16\_t port, uint32\_t \*state)\ int **rte\_pmd\_ixgbe\_bypass\_state\_set** (uint16\_t port, uint32\_t \*new\_state)\ int **rte\_pmd\_ixgbe\_bypass\_event\_show** (uint16\_t port, uint32\_t event, uint32\_t \*state)\ int **rte\_pmd\_ixgbe\_bypass\_event\_store** (uint16\_t port, uint32\_t event, uint32\_t state)\ int **rte\_pmd\_ixgbe\_bypass\_wd\_timeout\_store** (uint16\_t port, uint32\_t timeout)\ int **rte\_pmd\_ixgbe\_bypass\_ver\_show** (uint16\_t port, uint32\_t \*ver)\ int **rte\_pmd\_ixgbe\_bypass\_wd\_timeout\_show** (uint16\_t port, uint32\_t \*wd\_timeout)\ int **rte\_pmd\_ixgbe\_bypass\_wd\_reset** (uint16\_t port)\ int **rte\_pmd\_ixgbe\_mdio\_lock** (uint16\_t port)\ int **rte\_pmd\_ixgbe\_mdio\_unlock** (uint16\_t port)\ int **rte\_pmd\_ixgbe\_mdio\_unlocked\_read** (uint16\_t port, uint32\_t reg\_addr, uint32\_t dev\_type, uint16\_t \*phy\_data)\ int **rte\_pmd\_ixgbe\_mdio\_unlocked\_write** (uint16\_t port, uint32\_t reg\_addr, uint32\_t dev\_type, uint16\_t phy\_data)\ int **rte\_pmd\_ixgbe\_upd\_fctrl\_sbp** (uint16\_t port, int enable)\ \_\_rte\_experimental int **rte\_pmd\_ixgbe\_get\_fdir\_info** (uint16\_t port, struct **rte\_eth\_fdir\_info** \*fdir\_info)\ \_\_rte\_experimental int **rte\_pmd\_ixgbe\_get\_fdir\_stats** (uint16\_t port, struct **rte\_eth\_fdir\_stats** \*fdir\_stats)\ ## Detailed Description ixgbe PMD specific functions. Definition in file **rte\_pmd\_ixgbe.h**. ## Enumeration Type Documentation ### enum rte\_pmd\_ixgbe\_mb\_event\_rsp Response sent back to ixgbe driver from user app after callback **Enumerator** - *RTE\_PMD\_IXGBE\_MB\_EVENT\_NOOP\_ACK* *skip mbox request and ACK* - *RTE\_PMD\_IXGBE\_MB\_EVENT\_NOOP\_NACK* *skip mbox request and NACK* - *RTE\_PMD\_IXGBE\_MB\_EVENT\_PROCEED* *proceed with mbox request* \ - *RTE\_PMD\_IXGBE\_MB\_EVENT\_MAX* *max value of this enum* *Definition at line* **653** *of file* **rte\_pmd\_ixgbe.h***.* ## Function Documentation ### int rte\_pmd\_ixgbe\_ping\_vf (uint16\_t port, uint16\_t vf) *Notify VF when PF link status changes.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if vf invalid.* ### int rte\_pmd\_ixgbe\_set\_vf\_mac\_addr (uint16\_t port, uint16\_t vf, struct rte\_ether\_addr \* mac\_addr) *Set the VF MAC address.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* \ *mac\_addr VF MAC address.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if vf or mac\_addr is invalid.* ### int rte\_pmd\_ixgbe\_set\_vf\_vlan\_anti\_spoof (uint16\_t port, uint16\_t vf, uint8\_t on) *Enable/Disable VF VLAN anti spoofing.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF on which to set VLAN anti spoofing.* \ *on 1 - Enable VFs VLAN anti spoofing. 0 - Disable VFs VLAN anti spoofing.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_mac\_anti\_spoof (uint16\_t port, uint16\_t vf, uint8\_t on) *Enable/Disable VF MAC anti spoofing.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF on which to set MAC anti spoofing.* \ *on 1 - Enable VFs MAC anti spoofing. 0 - Disable VFs MAC anti spoofing.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_vlan\_insert (uint16\_t port, uint16\_t vf, uint16\_t vlan\_id) *Enable/Disable vf vlan insert* **Parameters** *port The port identifier of the Ethernet device.* \ *vf ID specifying VF.* \ *vlan\_id 0 - Disable VF's vlan insert. n - Enable; n is inserted as the vlan id.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_tx\_loopback (uint16\_t port, uint8\_t on) *Enable/Disable tx loopback* **Parameters** *port The port identifier of the Ethernet device.* \ *on 1 - Enable tx loopback. 0 - Disable tx loopback.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_all\_queues\_drop\_en (uint16\_t port, uint8\_t on) *set all queues drop enable bit* **Parameters** *port The port identifier of the Ethernet device.* \ *on 1 - set the queue drop enable bit for all pools. 0 - reset the queue drop enable bit for all pools.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_split\_drop\_en (uint16\_t port, uint16\_t vf, uint8\_t on) *set drop enable bit in the VF split rx control register* **Parameters** *port The port identifier of the Ethernet device.* \ *vf ID specifying VF.* \ *on 1 - set the drop enable bit in the split rx control register. 0 - reset the drop enable bit in the split rx control register.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_vlan\_stripq (uint16\_t port, uint16\_t vf, uint8\_t on) *Enable/Disable vf vlan strip for all queues in a pool* **Parameters** *port The port identifier of the Ethernet device.* \ *vf ID specifying VF.* \ *on 1 - Enable VF's vlan strip on RX queues. 0 - Disable VF's vlan strip on RX queues.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support this feature.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_macsec\_enable (uint16\_t port, uint8\_t en, uint8\_t rp) *Enable MACsec offload.* **Parameters** *port The port identifier of the Ethernet device.* \ *en 1 - Enable encryption (encrypt and add integrity signature). 0 - Disable encryption (only add integrity signature).* \ *rp 1 - Enable replay protection. 0 - Disable replay protection.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* ### int rte\_pmd\_ixgbe\_macsec\_disable (uint16\_t port) *Disable MACsec offload.* **Parameters** *port The port identifier of the Ethernet device.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* ### int rte\_pmd\_ixgbe\_macsec\_config\_txsc (uint16\_t port, uint8\_t \* mac) *Configure Tx SC (Secure Connection).* **Parameters** *port The port identifier of the Ethernet device.* \ *mac The MAC address on the local side.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* ### int rte\_pmd\_ixgbe\_macsec\_config\_rxsc (uint16\_t port, uint8\_t \* mac, uint16\_t pi) *Configure Rx SC (Secure Connection).* **Parameters** *port The port identifier of the Ethernet device.* \ *mac The MAC address on the remote side.* \ *pi The PI (port identifier) on the remote side.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* ### int rte\_pmd\_ixgbe\_macsec\_select\_txsa (uint16\_t port, uint8\_t idx, uint8\_t an, uint32\_t pn, uint8\_t \* key) *Enable Tx SA (Secure Association).* **Parameters** *port The port identifier of the Ethernet device.* \ *idx The SA to be enabled (0 or 1).* \ *an The association number on the local side.* \ *pn The packet number on the local side.* \ *key The key on the local side.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_macsec\_select\_rxsa (uint16\_t port, uint8\_t idx, uint8\_t an, uint32\_t pn, uint8\_t \* key) *Enable Rx SA (Secure Association).* **Parameters** *port The port identifier of the Ethernet device.* \ *idx The SA to be enabled (0 or 1)* \ *an The association number on the remote side.* \ *pn The packet number on the remote side.* \ *key The key on the remote side.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_rxmode (uint16\_t port, uint16\_t vf, uint16\_t rx\_mask, uint8\_t on) *Set RX L2 Filtering mode of a VF of an Ethernet device.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* \ *rx\_mask The RX mode mask, which is one or more of accepting Untagged Packets, packets that match the PFUTA table, Broadcast and Multicast Promiscuous. RTE\_ETH\_VMDQ\_ACCEPT\_UNTAG, RTE\_ETH\_VMDQ\_ACCEPT\_HASH\_UC, RTE\_ETH\_VMDQ\_ACCEPT\_BROADCAST and RTE\_ETH\_VMDQ\_ACCEPT\_MULTICAST will be used in rx\_mode.* \ *on 1 - Enable a VF RX mode. 0 - Disable a VF RX mode.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port\_id invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_rx (uint16\_t port, uint16\_t vf, uint8\_t on) *Enable or disable a VF traffic receive of an Ethernet device.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* \ *on 1 - Enable a VF traffic receive. 0 - Disable a VF traffic receive.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port\_id invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_tx (uint16\_t port, uint16\_t vf, uint8\_t on) *Enable or disable a VF traffic transmit of the Ethernet device.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* \ *on 1 - Enable a VF traffic transmit. 0 - Disable a VF traffic transmit.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port\_id invalid.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_vlan\_filter (uint16\_t port, uint16\_t vlan, uint64\_t vf\_mask, uint8\_t vlan\_on) *Enable/Disable hardware VF VLAN filtering by an Ethernet device of received VLAN packets tagged with a given VLAN Tag Identifier.* **Parameters** *port The port identifier of the Ethernet device.* \ *vlan The VLAN Tag Identifier whose filtering must be enabled or disabled.* \ *vf\_mask Bitmap listing which VFs participate in the VLAN filtering.* \ *vlan\_on 1 - Enable VFs VLAN filtering. 0 - Disable VFs VLAN filtering.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port\_id invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_vf\_rate\_limit (uint16\_t port, uint16\_t vf, uint32\_t tx\_rate, uint64\_t q\_msk) *Set the rate limitation for a vf on an Ethernet device.* **Parameters** *port The port identifier of the Ethernet device.* \ *vf VF id.* \ *tx\_rate The tx rate allocated from the total link speed for this VF id.* \ *q\_msk The queue mask which need to set the rate.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support this feature.* - • *(-ENODEV) if port\_id invalid.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_set\_tc\_bw\_alloc (uint16\_t port, uint8\_t tc\_num, uint8\_t \* bw\_weight) *Set all the TCs' bandwidth weight.* *The bw\_weight means the percentage occupied by the TC. It can be taken as the relative min bandwidth setting.* **Parameters** *port The port identifier of the Ethernet device.* \ *tc\_num Number of TCs.* \ *bw\_weight An array of relative bandwidth weight for all the TCs. The summary of the bw\_weight should be 100.* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-EINVAL) if bad parameter.* - • *(-ENOTSUP) not supported by firmware.* ### int rte\_pmd\_ixgbe\_bypass\_init (uint16\_t port) *Initialize bypass logic. This function needs to be called before executing any other bypass API.* **Parameters** *port The port identifier of the Ethernet device.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_state\_show (uint16\_t port, uint32\_t \* state) *Return bypass state.* **Parameters** *port The port identifier of the Ethernet device.* \ *state The return bypass state.* - • *(1) Normal mode* - • *(2) Bypass mode* - • *(3) Isolate mode* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_state\_set (uint16\_t port, uint32\_t \* new\_state) *Set bypass state* **Parameters** *port The port identifier of the Ethernet device.* \ *new\_state The current bypass state.* - • *(1) Normal mode* - • *(2) Bypass mode* - • *(3) Isolate mode* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_event\_show (uint16\_t port, uint32\_t event, uint32\_t \* state) *Return bypass state when given event occurs.* **Parameters** *port The port identifier of the Ethernet device.* \ *event The bypass event* - • *(1) Main power on (power button is pushed)* - • *(2) Auxiliary power on (power supply is being plugged)* - • *(3) Main power off (system shutdown and power supply is left plugged in)* - • *(4) Auxiliary power off (power supply is being unplugged)* - • *(5) Display or set the watchdog timer* *state The bypass state when given event occurred.* - • *(1) Normal mode* - • *(2) Bypass mode* - • *(3) Isolate mode* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_event\_store (uint16\_t port, uint32\_t event, uint32\_t state) *Set bypass state when given event occurs.* **Parameters** *port The port identifier of the Ethernet device.* \ *event The bypass event* - • *(1) Main power on (power button is pushed)* - • *(2) Auxiliary power on (power supply is being plugged)* - • *(3) Main power off (system shutdown and power supply is left plugged in)* - • *(4) Auxiliary power off (power supply is being unplugged)* - • *(5) Display or set the watchdog timer* *state The assigned state when given event occurs.* - • *(1) Normal mode* - • *(2) Bypass mode* - • *(3) Isolate mode* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_wd\_timeout\_store (uint16\_t port, uint32\_t timeout) *Set bypass watchdog timeout count.* **Parameters** *port The port identifier of the Ethernet device.* \ *timeout The timeout to be set.* - • *(0) 0 seconds (timer is off)* - • *(1) 1.5 seconds* - • *(2) 2 seconds* - • *(3) 3 seconds* - • *(4) 4 seconds* - • *(5) 8 seconds* - • *(6) 16 seconds* - • *(7) 32 seconds* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_ver\_show (uint16\_t port, uint32\_t \* ver) *Get bypass firmware version.* **Parameters** *port The port identifier of the Ethernet device.* \ *ver The firmware version* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_wd\_timeout\_show (uint16\_t port, uint32\_t \* wd\_timeout) *Return bypass watchdog timeout in seconds* **Parameters** *port The port identifier of the Ethernet device.* \ *wd\_timeout The return watchdog timeout. '0' represents timer expired* - • *(0) 0 seconds (timer is off)* - • *(1) 1.5 seconds* - • *(2) 2 seconds* - • *(3) 3 seconds* - • *(4) 4 seconds* - • *(5) 8 seconds* - • *(6) 16 seconds* - • *(7) 32 seconds* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_bypass\_wd\_reset (uint16\_t port) *Reset bypass watchdog timer* **Parameters** *port The port identifier of the Ethernet device.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-EINVAL) if bad parameter.* ### int rte\_pmd\_ixgbe\_mdio\_lock (uint16\_t port) *Acquire swfw semaphore lock for MDIO access* **Parameters** *port The port identifier of the Ethernet device.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port invalid.* - • *(IXGBE\_ERR\_SWFW\_SYNC) If sw/fw semaphore acquisition failed* ### int rte\_pmd\_ixgbe\_mdio\_unlock (uint16\_t port) *Release swfw semaphore lock used for MDIO access* **Parameters** *port The port identifier of the Ethernet device.* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port invalid.* ### int rte\_pmd\_ixgbe\_mdio\_unlocked\_read (uint16\_t port, uint32\_t reg\_addr, uint32\_t dev\_type, uint16\_t \* phy\_data) *Read PHY register using MDIO without MDIO lock The lock must be taken separately before calling this API* **Parameters** *port The port identifier of the Ethernet device.* \ *reg\_addr 32 bit PHY Register* \ *dev\_type Used to define device base address* \ *phy\_data Pointer for reading PHY register data* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port invalid.* - • *(IXGBE\_ERR\_PHY) If PHY read command failed* ### int rte\_pmd\_ixgbe\_mdio\_unlocked\_write (uint16\_t port, uint32\_t reg\_addr, uint32\_t dev\_type, uint16\_t phy\_data) *Write data to PHY register using without MDIO lock The lock must be taken separately before calling this API* **Parameters** *port The port identifier of the Ethernet device.* \ *reg\_addr 32 bit PHY Register* \ *dev\_type Used to define device base address* \ *phy\_data Data to write to PHY register* **Returns** - • *(0) if successful.* - • *(-ENOTSUP) if hardware doesn't support.* - • *(-ENODEV) if port invalid.* - • *(IXGBE\_ERR\_PHY) If PHY read command failed* ### int rte\_pmd\_ixgbe\_upd\_fctrl\_sbp (uint16\_t port, int enable) **Parameters** *port The port identifier of the Ethernet device.* \ *enable 0 to disable and nonzero to enable 'SBP' bit in FCTRL register to receive all packets* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if hardware doesn't support this feature.* ### \_\_rte\_experimental int rte\_pmd\_ixgbe\_get\_fdir\_info (uint16\_t port, struct rte\_eth\_fdir\_info \* fdir\_info) *Get port fdir info* **Parameters** *port The port identifier of the Ethernet device.* \ *fdir\_info The fdir info of the port* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if operation not supported.* ### \_\_rte\_experimental int rte\_pmd\_ixgbe\_get\_fdir\_stats (uint16\_t port, struct rte\_eth\_fdir\_stats \* fdir\_stats) *Get port fdir status* **Parameters** *port The port identifier of the Ethernet device.* \ *fdir\_stats The fdir status of the port* **Returns** - • *(0) if successful.* - • *(-ENODEV) if port invalid.* - • *(-ENOTSUP) if operation not supported.* ## Author *Generated automatically by Doxygen for DPDK from the source code.*