--- name: "quvi-get" section: "1" platform: "linux" package: "quvi" version: "0.9.5-0.2+b1" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/quvi-get" --- # quvi-get(1) The vilified media stream extraction tool ## NAME quvi-get - The vilified media stream extraction tool ## SYNOPSIS ``` quvi get [OPTIONS] [ARGS] ``` ## DESCRIPTION This command saves the media stream to a file. ## DEFAULT BEHAVIOUR The command will attempt to determine if any of the [**libquvi-scripts**(7)](/libquvi-scripts/7.md) accept the input URL before exiting with an error. The script type {playlist,media,...} determines how the command will handle the input URL. Playlist URLs The entire playlist of media URLs will be extracted. Media URLs The media will be extracted. ## SUPPORT The support for the media hosts is determined by the current selection of [**libquvi-scripts**(7)](/libquvi-scripts/7.md). ## CONFIGURATION See [**quvirc**(5)](/quvirc/5.md) for more information about the groups and the variables that quvi parses. ## INPUT The command will read stdin by default. The input is expected to *contain* URLs. The command arguments are expected to be either URLs or file paths. If the input is read from either stdin or a file, the contents are read as RFC2483. The input may contain file URIs. ## OPTIONS ### Core - \-o, --check-mode-offline Do not resolve URL redirections before passing the URL to the [**libquvi-scripts**(7)](/libquvi-scripts/7.md) to determine whether the URL is accepted by any of the scripts. config: core.check-mode-offline=\ - \-B, --print-subtitles Query and print the available media subtitles. See also *--print-format*. - \-S, --print-streams Query and print the available media streams. See also *--print-format*. - \-l, --subtitle-language PATTERN\[,PATTERN,...\] Match a subtitle language using a regex PATTERN. The value may be a comma-separated list of regex PATTERNs (left-to-right order) that are matched against the available selection. The value may also contain the reserved keyword *croak* which will cause [**libquvi**(3)](/libquvi/3.md) to exit with an error when reached. **Note**\ The first available subtitle language will be chosen if nothing matched the PATTERN ``` config: core.subtitle-language= ``` - \-s, --stream PATTERN\[,PATTERN,...\] Match a stream using a regex PATTERN. The value may be a comma-separated list of regex PATTERNs (left-to-right order) that are matched against the available selection. The value may contain the following reserved keywords: • *croak* - instructs [**libquvi**(3)](/libquvi/3.md) to exit with an error when reached • *best* - instructs [**libquvi**(3)](/libquvi/3.md) to choose the best quality stream The *best* quality is determined by the [**libquvi-scripts**(7)](/libquvi-scripts/7.md) by comparing the media quality properties, e.g. the video height property, although the actual method may vary depending on the data provided by the media hosting service. **Note**\ The first available stream is selected if nothing matched ``` config: core.stream= ``` \-L, --subtitle-export-format FORMAT (default: srt) Export the subtitle language to the specified FORMAT. The available FORMATs are determined by the current selection of the subtitle export *[libquvi-scripts(7)](/libquvi-scripts/7.md)*. config: core.subtitle-export-format=\ \-b, --verbosity LEVEL (default: verbose) Specify the verbosity level of the command. LEVEL may be: • *debug* - verbose + enable verbose output for libcurl (CURLOPT\_VERBOSE) • *verbose* - default • *quiet* - errors only • *mute* - nothing at all config: core.verbosity=\ ### Exec - \-A, --exec-dump-argv Print the argument array used to execute the child program. config: exec.dump-argv=\ - \-E, --exec-enable-stderr Do not discard child program’s standard error. config: exec.enable-stderr=\ - \-O, --exec-enable-stdout Do not discard child program’s standard output. config: exec.enable-stdout=\ - \-e, --exec COMMAND Execute a child program asynchoronously after parsing the media properties. COMMAND may contain any of the following property sequences. Each occurence will be replaced by the command before the COMMAND is executed: ``` %s Media property: start time (ms) %T Media property: thumbnail URL %d Media property: duration (ms) %u Media stream property: URL %I Media stream property: ID %t Media property: title %i Media property: ID %e File extension[1] %f Path to the saved media file[2] ``` ``` [1]: The file extension is parsed from the HTTP content-type header. quvi-get(1) replaces this sequence with HTTP media streams only. quvi-dump(2) replaces it only when --query-metainfo is used with HTTP media streams. ``` ``` [2]: This sequence is unique to quvi-get(1) ``` This option may be specified multiple times. In the [**quvirc**(5)](/quvirc/5.md) file, specify the commands in a comma-separated list. config: exec.external=\ ### Get - \-w, --overwrite Overwrite the existing file. \-g, --output-regex PATTERN (default: multiple) Apply a regex PATTERN against a media property. The PATTERN will be used to match/replace **all** occurences — this is similar to the *g* modifier of Perl. The option supports the *m//* (match, *m* is optional) operation and the *s///* substitution operation. The syntax is similar to Perl-syntax except that this option expects a leading "property sequence" that specifies the media property to apply the regex PATTERN against. See the section called “Exec” for a complete list of the supported "property sequences". This option may be specified multiple times. Inside the [**quvirc**(5)](/quvirc/5.md) file, specify the PATTERNs in a comma-separated list. Double any backslashes inside the [**quvirc**(5)](/quvirc/5.md) in the PATTERN. The command applies the following PATTERNs by default: ``` %t:/\w|\s/ %t:s/\s\s+/ / %t:s/^\s+// %t:s/\s+$// ``` config: get.output-regex=\ - \-f, --output-file FILE Write the media to the specified FILE. \-n, --output-name FORMAT (default: "%t.%e") Specify the file name FORMAT. This value determines how the saved media files will be named. All occurences of the supported media property sequences will be replaced. See the section called “Exec” for a complete list of the supported "property sequences". config: get.output-name=\ \-i, --output-dir DIR (default: cwd) Write the saved media to the DIR. config: get.output-dir=\ \-r, --resume-from OFFSET (default: 0) Specify the offset from which the transfer should continue. If this value is 0 (default), the command will attempt to resume the transfers automatically. If the value is \>0, the command will attempt to resume the transfer from the specified offset. If the value is \>=0, the command will send an HEAD request to the HTTP server to query the content-{type,length} values. These are used to build the output filename and to determine whether the transfer should be resumed; the content-length value is compared to the local file length to determine whether transfer should resume. Use of a negative value (\<0) will cause the command to disable resuming completely causing the command to *skip* the step that sends the HEAD request to the HTTP server, and start the transfer from the 0 offset, and effectively, *overwriting* the existing file. The content-{type,length} values are parsed from the returned HTTP GET response, instead. Technical: libcurl requires setting CURLOPT\_RESUME\_FROM\_LARGE before ‘curl\_easy\_perform’ is called. The the command has no way of knowing whether the transfer should be resumed if ‘content-length’ is not queried by sending a HTTP HEAD request before the transfer begins. A possible workaround is to specify from which offset the transfer should continue, but this requires that the user determines the value by hand. config: get.resume-from=\ - \-k, --skip-transfer Do not save the media. config: get.skip-transfer=\ \-t, --throttle RATE (default: 0) Do not exceed the transfer RATE (Ki/s). Setting this value to 0 disables the throttle. This setting affects only the saving process of the media stream. config: get.throttle=\ ### HTTP - \-c, --enable-cookies Have libcurl parse the received cookies and use them in the subsequent HTTP requests. config: http.enable-cookies=\ \-u, --user-agent USERAGENT (default: Mozilla/5.0) Identify as USERAGENT to the HTTP server. **Note**\ [**libquvi-scripts**(7)](/libquvi-scripts/7.md) may override this value ``` config: http.user-agent= ``` ## EXAMPLES • Save the stream: ``` $ quvi get MEDIA_URL ``` • Dump the available streams: ``` $ quvi get -S MEDIA_URL ``` • Save the selected stream: ``` $ quvi get -s foo MEDIA_URL ``` • Similar to the above but choose the stream "baz" if "foo" is not available: ``` $ quvi get -s foo,baz,best MEDIA_URL $ quvi get -s foo,baz,croak MEDIA_URL ``` The first will grab whatever is the best quality if neither ("foo" or "baz") stream is available. The use of "croak" keyword will cause the command to exit with an error if neither stream is available. • Dump the available subtitles: ``` $ quvi get -B MEDIA_URL ``` • Do not save the media stream, grab "cc\_en" subtitles only: ``` $ quvi get -k -l cc_en,croak MEDIA_URL ``` Use of "croak" keyword will cause the command to exit with an error if "cc\_en" subtitle was not available. • Watch the entire playlist using *[mplayer(1)](/mplayer/1.md)*: ``` $ quvi get -e "mplayer %f" PLAYLIST_URL ``` ## ENVIRONMENT See [**quvi**(1)](/quvi/1.md) ## EXIT STATUS Either EXIT\_SUCCESS or EXIT\_FAILURE. The actual value depends on the platform, on POSIX systems they are 0 (success) and 1 (failure). ## SEE ALSO [**quvirc**(5)](/quvirc/5.md), [**libquvi**(3)](/libquvi/3.md) ## FURTHER RESOURCES Home http://quvi.sourceforge.net/ Development code git://repo.or.cz/quvi-tool.git gitweb http://repo.or.cz/w/quvi-tool.git ## AUTHORS Toni Gundogdu \ Author. ## REPORTING BUGS Report bugs to the quvi-devel mailing list \ where the development and the maintenance is primarily done. You do not have to be subscribed to the list to send a message there. ## LICENSE quvi is Free Software licensed under the GNU Affero GPLv3+ ## QUVI Part of the *[quvi(1)](/quvi/1.md)* suite