--- name: "qmicli" section: "1" platform: "linux" package: "libqmi" version: "1.38.0-2" release: "Arch Linux 2026-11-01" platforms: ["linux"] url: "https://new.carta.tech/qmicli" --- # qmicli(1) Control QMI devices ## NAME qmicli - Control QMI devices ## DESCRIPTION ### Usage: - qmicli \[OPTION???\] - Control QMI devices ### Help Options: - **-h**, **--help** Show help options - **--help-all** Show all help options - **--help-dms** Show Device Management Service options - **--help-nas** Show Network Access Service options - **--help-wds** Show Wireless Data Service options - **--help-pbm** Show Phonebook Management options - **--help-pdc** Show platform device configurations options - **--help-uim** Show User Identity Module options - **--help-sar** Show Specific Absorption Rate options - **--help-wms** Show Wireless Messaging Service options - **--help-wda** Show Wireless Data Administrative options - **--help-voice** Show Voice Service options - **--help-loc** Show location options - **--help-qos** Show Quality of Service options - **--help-gas** Show General Application Service options - **--help-gms** Show General Modem Service options - **--help-dsd** Show Data System Determination options - **--help-dpm** Show Data Port Mapper Service options - **--help-fox** Show Foxconn Modem Service options - **--help-atr** Show AT Relay Service options - **--help-imsp** Show IP Multimedia Subsystem Presence Service options - **--help-imsa** Show IP Multimedia Subsystem Application Service options - **--help-ims** Show IP Multimedia Subsystem Settings Service options - **--help-link-management** Show link management specific options - **--help-qmiwwan** Show qmi\_wwan driver specific options ### DMS options: - **--dms-get-ids** Get IDs - **--dms-get-capabilities** Get capabilities - **--dms-get-manufacturer** Get manufacturer - **--dms-get-model** Get model - **--dms-get-revision** Get revision - **--dms-get-msisdn** Get MSISDN - **--dms-get-power-state** Get power state - **--dms-uim-set-pin-protection**=*\[*(PIN\|PIN2),(disable\|enable),(current PIN)\] Set PIN protection in the UIM - **--dms-uim-verify-pin**=*\[*(PIN\|PIN2),(current PIN)\] Verify PIN - **--dms-uim-unblock-pin**=*\[*(PIN\|PIN2),(PUK),(new PIN)\] Unblock PIN - **--dms-uim-change-pin**=*\[*(PIN\|PIN2),(old PIN),(new PIN)\] Change PIN - **--dms-uim-get-pin-status** Get PIN status - **--dms-uim-get-iccid** Get ICCID - **--dms-uim-get-imsi** Get IMSI - **--dms-uim-get-state** Get UIM State - **--dms-uim-get-ck-status**=*\[*(pn\|pu\|pp\|pc\|pf)\] Get CK Status - **--dms-uim-set-ck-protection**=*\[*(pn\|pu\|pp\|pc\|pf),(disable),(key)\] Disable CK protection - **--dms-uim-unblock-ck**=*\[*(pn\|pu\|pp\|pc\|pf),(key)\] Unblock CK - **--dms-get-hardware-revision** Get the HW revision - **--dms-get-operating-mode** Get the device operating mode - **--dms-set-operating-mode**=*\[*(Operating mode)\] Set the device operating mode - **--dms-get-time** Get the device time - **--dms-get-prl-version** Get the PRL version - **--dms-get-activation-state** Get the state of the service activation - **--dms-activate-automatic**=*\[Activation* Code\] Request automatic service activation - **--dms-activate-manual**=*\[SPC*,SID,MDN,MIN\] Request manual service activation - **--dms-get-user-lock-state** Get the state of the user lock - **--dms-set-user-lock-state**=*\[*(disable\|enable),(current lock code)\] Set the state of the user lock - **--dms-set-user-lock-code**=*\[*(old lock code),(new lock code)\] Change the user lock code - **--dms-read-user-data** Read user data - **--dms-write-user-data**=*\[*(User data)\] Write user data - **--dms-read-eri-file** Read ERI file - **--dms-restore-factory-defaults**=*\[*(Service Programming Code)\] Restore factory defaults - **--dms-validate-service-programming-code**=*\[*(Service Programming Code)\] Validate the Service Programming Code - **--dms-set-firmware-id** Set firmware id - **--dms-get-band-capabilities** Get band capabilities - **--dms-get-factory-sku** Get factory stock keeping unit - **--dms-list-stored-images** List stored images - **--dms-select-stored-image**=*\[modem*#,pri#\] where # is the index Select stored image - **--dms-delete-stored-image**=*\[modem*#\|pri#\] where # is the index Delete stored image - **--dms-get-firmware-preference** Get firmware preference - **--dms-set-firmware-preference**=*\[*"key=value,..."\] Set firmware preference (required keys: firmware-version, config-version, carrier; optional keys: modem-storage-index, override-download=yes) - **--dms-get-boot-image-download-mode** Get boot image download mode - **--dms-set-boot-image-download-mode**=*\[normal*\|boot-and-recovery\] Set boot image download mode - **--dms-get-software-version** Get software version - **--dms-set-fcc-authentication** Set FCC authentication - **--dms-get-supported-messages** Get supported messages - **--dms-hp-change-device-mode**=*\[fastboot\]* Change device mode (HP specific) - **--dms-swi-get-current-firmware** Get Current Firmware (Sierra Wireless specific) - **--dms-swi-get-usb-composition** Get current and supported USB compositions (Sierra Wireless specific) - **--dms-swi-set-usb-composition**=*\[*#\] Set USB composition (Sierra Wireless specific) - **--dms-foxconn-change-device-mode**=*\[fastboot-ota*\|fastboot-online\] Change device mode (Foxconn specific) - **--dms-foxconn-get-firmware-version**=*\[firmware-mcfg-apps*\|firmware-mcfg\|apps\] Get firmware version (Foxconn specific) - **--dms-foxconn-set-fcc-authentication**=*\[magic\]* Set FCC authentication (Foxconn specific) - **--dms-foxconn-set-fcc-authentication-v2**=*\[magic-string*,magic-number\] Set FCC authentication (Foxconn specific, v2) - **--dms-get-mac-address**=*\[wlan*\|bt\] Get default MAC address - **--dms-reset** Reset the service state - **--dms-noop** Just allocate or release a DMS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### NAS options: - **--nas-get-signal-strength** Get signal strength - **--nas-get-signal-info** Get signal info - **--nas-get-tx-rx-info**=*\[*(Radio Interface)\] Get TX/RX info - **--nas-get-home-network** Get home network - **--nas-get-serving-system** Get serving system - **--nas-get-system-info** Get system info - **--nas-get-technology-preference** Get technology preference - **--nas-get-preferred-networks** Get preferred networks - **--nas-set-preferred-networks**=*\[\[MCCMNC*,access\_tech\],...\] Set preferred networks list - **--nas-get-system-selection-preference** Get system selection preference - **--nas-set-system-selection-preference**=*\[cdma-1x*\|cdma-1xevdo\|gsm\|umts\|lte\|td-scdma\]\[,\[automatic\|manual=MCCMNC\]\] Set system selection preference - **--nas-network-scan**=*\[gsm*\|umts\|lte\|td-scdma\|5gnr\] Scan all networks (no argument) or scan one specific network type - **--nas-incremental-network-scan**=*\[gsm*\|umts\|lte\|td-scdma\|5gnr\] Incrementally scan all networks (no argument) or scan one specific network type - **--nas-get-cell-location-info** Get Cell Location Info - **--nas-force-network-search** Force network search - **--nas-get-operator-name** Get operator name data - **--nas-get-plmn-name**=*\[mccmnc\]* Get plmn name data - **--nas-get-lte-cphy-ca-info** Get LTE Cphy CA Info - **--nas-get-rf-band-info** Get RF Band Info - **--nas-get-network-time** Get Network Time - **--nas-get-drx** Get DRX - **--nas-get-endc-config** Get EN-DC Config - **--nas-get-supported-messages** Get supported messages - **--nas-swi-get-status** Get status ((Sierra Wireless specific) - **--nas-reset** Reset the service state - **--nas-noop** Just allocate or release a NAS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### WDS options: - **--wds-start-network**=*\[*"key=value,..."\] Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP\|CHAP\|BOTH), username, password, autoconnect=yes, ip-type (4\|6)) - **--wds-follow-network** Follow the network status until disconnected. Use with \`--wds-start-network' - **--wds-stop-network**=*\[Packet* data handle\] OR \[disable-autoconnect\] Stop network - **--wds-get-current-settings** Get current settings - **--wds-get-packet-service-status** Get packet service status - **--wds-get-packet-statistics** Get packet statistics - **--wds-get-data-bearer-technology** Get data bearer technology - **--wds-get-current-data-bearer-technology** Get current data bearer technology - **--wds-go-dormant** Make the active data connection go dormant - **--wds-go-active** Make the active data connection go active - **--wds-get-dormancy-status** Get the dormancy status of the active data connection - **--wds-create-profile**=*\[*"(3gpp\|3gpp2)\[,key=value,...\]"\] Create new profile using first available profile index (optional keys: name, apn, pdp-type (IP\|PPP\|IPV6\|IPV4V6), auth (NONE\|PAP\|CHAP\|BOTH), username, password, context-num, no-roaming=yes, disabled=yes) - **--wds-swi-create-profile-indexed**=*\[*"(3gpp\|3gpp2),#\[,key=value,...\]"\] Create new profile at specified profile index \[Sierra Wireless specific\] (optional keys: name, apn, pdp-type (IP\|PPP\|IPV6\|IPV4V6), auth (NONE\|PAP\|CHAP\|BOTH), username, password, context-num, no-roaming=yes, disabled=yes) - **--wds-modify-profile**=*\[*"(3gpp\|3gpp2),#,key=value,..."\] Modify existing profile (optional keys: name, apn, pdp-type (IP\|PPP\|IPV6\|IPV4V6), auth (NONE\|PAP\|CHAP\|BOTH), username, password, context-num, no-roaming=yes, disabled=yes) - **--wds-delete-profile**=*\[*(3gpp\|3gpp2),#\] Delete existing profile - **--wds-get-profile-list**=*\[3gpp*\|3gpp2\] Get profile list - **--wds-get-default-profile-number**=*\[3gpp*\|3gpp2\] Get default profile number - **--wds-set-default-profile-number**=*\[*(3gpp\|3gpp2),#\] Set default profile number - **--wds-get-default-settings**=*\[3gpp*\|3gpp2\] Get default settings - **--wds-get-autoconnect-settings** Get autoconnect settings - **--wds-set-autoconnect-settings**=*\[*(enabled\|disabled\|paused)\[,(roaming-allowed\|home-only)\]\] Set autoconnect settings (roaming settings optional) - **--wds-get-supported-messages** Get supported messages - **--wds-reset** Reset the service state - **--wds-bind-data-port**=*\[a2-mux-rmnet0-7*\|#\] Bind data port to controller device to be used with \`--client-no-release-cid' - **--wds-bind-mux-data-port**=*\[*"key=value,..."\] Bind qmux data port to controller device (allowed keys: mux-id, ep-type (undefined\|hsusb\|pcie\|embedded\|bam-dmux), ep-iface-number) to be used with \`--client-no-release-cid' - **--wds-set-ip-family**=*\[4*\|6\] Set IP family - **--wds-get-channel-rates** Get channel data rates - **--wds-get-lte-attach-parameters** Get LTE attach parameters - **--wds-get-max-lte-attach-pdn-num** Get the maximum number of LTE attach PDN - **--wds-get-lte-attach-pdn-list** Get the list of LTE attach PDN - **--wds-set-lte-attach-pdn-list**=*\[*#,#,...\] Set the list of LTE attach PDN - **--wds-noop** Just allocate or release a WDS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### PBM options: - **--pbm-get-all-capabilities** Get all phonebook capabilities - **--pbm-get-emergency-list** Get list of emergency numbers - **--pbm-noop** Just allocate or release a PBM client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### PDC options: - **--pdc-list-configs**=*\[*(platform\|software)\] List all configs - **--pdc-delete-config**=*\[*(platform\|software),ConfigId\] Delete config - **--pdc-activate-config**=*\[*(platform\|software),ConfigId\] Activate config - **--pdc-deactivate-config**=*\[*(platform\|software),ConfigId\] Deactivate config - **--pdc-load-config**=*\[Path* to config\] Load config to device - **--pdc-monitor-refresh** Watch for refresh indications - **--pdc-noop** Just allocate or release a PDC client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### UIM options: - **--uim-set-pin-protection**=*\[*(PIN1\|PIN2\|UPIN),(disable\|enable),(current PIN)\[,"key=value,..."\]\] Set PIN protection (allowed keys: session-type ((primary\|secondary\|tertiary\|quarternary\|quinary)-gw-provisioning\|card-slot-\[1-5\])) - **--uim-verify-pin**=*\[*(PIN1\|PIN2\|UPIN),(current PIN)\[,"key=value,..."\]\] Verify PIN (allowed keys: session-type ((primary\|secondary\|tertiary\|quarternary\|quinary)-gw-provisioning\|card-slot-\[1-5\])) - **--uim-unblock-pin**=*\[*(PIN1\|PIN2\|UPIN),(PUK),(new PIN)\[,"key=value,..."\]\] Unblock PIN (allowed keys: session-type ((primary\|secondary\|tertiary\|quarternary\|quinary)-gw-provisioning\|card-slot-\[1-5\])) - **--uim-change-pin**=*\[*(PIN1\|PIN2\|UPIN),(old PIN),(new PIN)\[,"key=value,..."\]\] Change PIN (allowed keys: session-type ((primary\|secondary\|tertiary\|quarternary\|quinary)-gw-provisioning\|card-slot-\[1-5\])) - **--uim-read-transparent**=*\[0xNNNN*,0xNNNN,...\] Read a transparent file given the file path - **--uim-get-file-attributes**=*\[0xNNNN*,0xNNNN,...\] Get the attributes of a given file - **--uim-read-record**=*\[*"key=value,..."\] Read a record from given file (allowed keys: record-number, record-length, file (\[0xNNNN-0xNNNN,...\]) - **--uim-get-card-status** Get card status - **--uim-get-supported-messages** Get supported messages - **--uim-sim-power-on**=*\[*(slot number)\] Power on SIM card - **--uim-sim-power-off**=*\[*(slot number)\] Power off SIM card - **--uim-change-provisioning-session**=*\[*"key=value,..."\] Change provisioning session (allowed keys: session-type ((primary\|secondary\|tertiary\|quarternary\|quinary)-gw-provisioning), activate (yes\|no), slot, aid) - **--uim-get-slot-status** Get slot status - **--uim-switch-slot**=*\[*(slot number)\] Switch active physical slot - **--uim-monitor-slot-status** Watch for slot status indications - **--uim-reset** Reset the service state - **--uim-monitor-refresh-file**=*\[0xNNNN*,0xNNNN,...\] Watch for REFRESH events for given file paths - **--uim-monitor-refresh-all** Watch for REFRESH events for any file - **--uim-get-configuration** Get personalization status of the modem - **--uim-depersonalization**=*\[*(feature),(operation),(control key)\[,(slot number)\]\] Deactivates or unblocks personalization feature - **--uim-remote-unlock**=*\[XX*:XX:...\] Updates the SimLock configuration data - **--uim-open-logical-channel**=*\[*(slot number),(aid)\] Open logical channel - **--uim-close-logical-channel**=*\[*(slot number),(channel ID)\] Close logical channel - **--uim-send-apdu**=*\[*(slot number),(channel ID),(apdu)\] Send APDU - **--uim-noop** Just allocate or release a UIM client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### SAR options: - **--sar-rf-get-state** Get RF state - **--sar-rf-set-state**=*\[*(state number)\] Set RF state. - **--sar-noop** Just allocate or release a SAR client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### WMS options: - **--wms-get-supported-messages** Get supported messages - **--wms-get-routes** Get SMS route information - **--wms-set-routes**=*\[*"key=value,..."\] Set SMS route information (keys: type, class, storage, receipt-action) - **--wms-set-cbs-channels**=*\[start-end*,start-end\] Set CBS channels (e.g. 4371-4372,4370,4373-4380 - **--wms-get-cbs-channels** Get CBS channels - **--wms-reset** Reset the service state - **--wms-noop** Just allocate or release a WMS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### WDA options: - **--wda-set-data-format**=*\[*"key=value,..."\] Set data format (allowed keys: link-layer-protocol (802-3\|raw-ip), ul-protocol (disabled\|tlp\|qc-ncm\|mbim\|rndis\|qmap\|qmapv5), dl-protocol (disabled\|tlp\|qc-ncm\|mbim\|rndis\|qmap\|qmapv5), dl-datagram-max-size, dl-max-datagrams, ep-type (undefined\|hsusb\|pcie\|embedded), ep-iface-number, ul-datagram-max-size, ul-max-datagrams) - **--wda-get-data-format**=*\[*"key=value,..."\] Get data format (allowed keys: ep-type (undefined\|hsusb\|pcie\|embedded), ep-iface-number); also allows empty key list - **--wda-get-supported-messages** Get supported messages - **--wda-set-loopback-configuration**=*\[*"key=value,..."\] Set loopback configuration (allowed keys: state (enabled\|disabled), replication-factor); - **--wda-noop** Just allocate or release a WDA client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### VOICE options: - **--voice-get-config** Get Voice service configuration - **--voice-get-supported-messages** Get supported messages - **--voice-noop** Just allocate or release a VOICE client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### LOC options: - **--loc-session-id**=*\[ID\]* Session ID for the LOC session - **--loc-start** Start location gathering - **--loc-stop** Stop location gathering - **--loc-get-position-report** Get position reported by the location module - **--loc-get-gnss-sv-info** Show GNSS space vehicle info - **--loc-timeout**=*\[SECS\]* Maximum time to wait for information in \`--loc-get-position-report' and \`--loc-get-gnss-sv-info' (default 30s) - **--loc-follow-position-report** Follow all position updates reported by the location module indefinitely - **--loc-follow-gnss-sv-info** Follow all GNSS space vehicle info updates reported by the location module indefinitely - **--loc-follow-nmea** Follow all NMEA trace updates reported by the location module indefinitely - **--loc-delete-assistance-data** Delete positioning assistance data - **--loc-get-nmea-types** Get list of enabled NMEA traces - **--loc-set-nmea-types**=*\[type1*\|type2\|type3...\] Set list of enabled NMEA traces - **--loc-get-operation-mode** Get operation mode - **--loc-set-operation-mode**=*\[default*\|msb\|msa\|standalone\|cellid\|wwan\] Set operation mode - **--loc-get-engine-lock** Get engine lock status - **--loc-set-engine-lock**=*\[none*\|mi\|mt\|all\] Set engine lock status - **--loc-inject-position-latitude**=*-90*.0 to 90.0. Positive values indicate northern latitude. Inject latitude into GNSS engine - **--loc-inject-position-longitude**=*-180*.0 to 180.0. Positive values indicate eastern longitude. Inject longitude into GNSS engine - **--loc-inject-time** Inject UTC time into GNSS engine - **--loc-get-predicted-orbits-data-source** Get predicted orbits data source - **--loc-get-predicted-orbits-data-validity** Get predicted orbits data validity information - **--loc-noop** Just allocate or release a LOC client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### QoS options: - **--qos-get-flow-status**=*\[QoS* ID\] Get QoS flow status - **--qos-get-network-status** Gets the network status - **--qos-swi-read-data-stats**=*\[APN* ID\] Read data stats (Sierra Wireless specific) - **--qos-reset** Reset the service state - **--qos-noop** Just allocate or release a QOS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### GAS options: - **--gas-dms-set-usb-composition**=*\[pid\]* Sets the USB composition - **--gas-dms-get-usb-composition** Gets the current USB composition - **--gas-dms-get-firmware-list** Gets the list of stored firmware - **--gas-dms-get-active-firmware** Gets the currently active firmware - **--gas-dms-set-active-firmware**=*\[index\]* Sets the active firmware index - **--gas-dms-get-ethernet-mac-address** Gets the Ethernet PDU MAC address available in the modem - **--gas-dms-set-firmware-auto-sim**=*\[*"key=value,..."\] Sets the automatic carrier switching mode according to the sim (allowed keys: mode (disable\|enable\|enable-one-shot), config-id - **--gas-dms-get-firmware-auto-sim** Gets the automatic carrier switching mode according to the sim - **--gas-noop** Just allocate or release a GAS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### GMS options: - **--gms-test-get-value** Gets test value - **--gms-test-set-value**=*\[mandatory-value\]\[*,\[optional-value\]\] Sets test value - **--gms-noop** Just allocate or release a GMS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### DSD options: - **--dsd-get-apn-info**=*\[*(type)\] Gets the settings associated to a given APN type - **--dsd-set-apn-type**=*\[*(name), (type1\|type2\|type3...)\] Sets the types associated to a given APN name - **--dsd-get-system-status** Gets system status - **--dsd-noop** Just allocate or release a DSD client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### DPM options: - **--dpm-open-port**=*\[*"key=value,..."\] Open port (allowed-keys: ctrl-ep-type, ctrl-ep-iface-number, ctrl-port-name, hw-data-ep-type, hw-data-ep-iface-number, hw-data-rx-id, hw-data-tx-id, sw-data-ep-type, sw-data-ep-iface-number, sw-data-port-name) - **--dpm-close-port** Close port - **--dpm-noop** Just allocate or release a DPM client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### FOX options: - **--fox-get-firmware-version**=*\[firmware-mcfg-apps*\|firmware-mcfg\|apps\] Get firmware version - **--fox-set-fcc-authentication**=*\[magic-string*,magic-number\] Set FCC authentication - **--fox-noop** Just allocate or release a FOX client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### ATR options: - **--atr-send**=*\[AT* command\] Send an AT command and wait for the reply - **--atr-send-only**=*\[AT* command\] Send an AT command without waiting for the reply - **--atr-monitor** Watch for unsolicited indications - **--atr-noop** Just allocate or release an ATR client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### IMSP options: - **--imsp-get-enabler-state** Get IMSP enabler state - **--imsp-noop** Just allocate or release a IMSP client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### IMSA options: - **--imsa-bind**=*\[binding\]* Bind to IMSA (use with **--client-no-release-cid**) - **--imsa-get-ims-registration-status** Get IMS registration status - **--imsa-get-ims-services-status** Get IMS services status - **--imsa-noop** Just allocate or release a IMSA client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### IMS options: - **--ims-bind**=*\[binding\]* Bind to IMS Settings (use with **--client-no-release-cid**) - **--ims-get-ims-services-enabled-setting** Get IMS Services Enabled Setting - **--ims-noop** Just allocate or release a IMS client. Use with \`--client-no-release-cid' and/or \`--client-cid' ### Link management options: - **--link-list**=*\[IFACE\]* List links created from a given interface - **--link-add**=*\[iface=IFACE*,prefix=PREFIX\[,mux-id=N\[,initial-mux-id=M\]\]\[,flags=FLAGS\]\] Create new network interface link - **--link-delete**=*\[link-iface=IFACE\]\[*,\[mux-id=N\]\] Delete a given network interface link - **--link-delete-all**=*\[IFACE\]* Delete all network interface links from the given interface ### qmi\_wwan specific options: - **-w**, **--get-wwan-iface** Get the associated WWAN iface name - **-e**, **--get-expected-data-format** Get the expected data format in the WWAN iface - **-E**, **--set-expected-data-format**=*\[802-3*\|raw-ip\|qmap-pass-through\] Set the expected data format in the WWAN iface ### Application Options: - **-d**, **--device**=*\[PATH*\|URI\] Specify device path or QRTR URI (e.g. qrtr://0) - **--get-service-version-info** Get service version info - **--device-set-instance-id**=*\[Instance* ID\] Set instance ID - **--device-open-version-info** Run version info check when opening device - **--device-open-sync** Run sync operation when opening device - **-p**, **--device-open-proxy** Request to use the 'qmi-proxy' proxy - **--device-open-qmi** Open a cdc-wdm device explicitly in QMI mode - **--device-open-mbim** Open a cdc-wdm device explicitly in MBIM mode - **--device-open-auto** Open a cdc-wdm device in either QMI or MBIM mode (default) - **--device-open-net**=*\[net-802-3*\|net-raw-ip\|net-qos-header\|net-no-qos-header\] Open device with specific link protocol and QoS flags - **--client-cid**=*\[CID\]* Use the given CID, don't allocate a new one - **--client-no-release-cid** Do not release the CID when exiting - **-v**, **--verbose** Run action with verbose logs, including the debug ones - **--verbose-full** Run action with verbose logs, including the debug ones and personal info - **--silent** Run action with no logs; not even the error/warning ones - **-V**, **--version** Print version ## COPYRIGHT Copyright © 2012-2023 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later \\ This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. ## SEE ALSO The full documentation for **qmicli** is maintained as a Texinfo manual. If the **info** and **qmicli** programs are properly installed at your site, the command - **info qmicli** should give you access to the complete manual.