---
name: "qmi-network"
section: "1"
platform: "linux"
package: "libqmi"
version: "1.38.0-2"
release: "Arch Linux 2026-11-01"
platforms: ["linux"]
url: "https://new.carta.tech/qmi-network"
---

# qmi-network(1)

Simple network management of QMI devices

## NAME

qmi-network - Simple network management of QMI devices

## SYNOPSIS

**qmi-network** \[*OPTIONS*\] \[*DEVICE*\] \[*COMMAND*\]

## DESCRIPTION

Simple network management of QMI devices

### Commands:

- start

  Start network connection

- stop

  Stop network connection

- status

  Query network connection status

## OPTIONS

- **--profile**=*\[PATH\]*

  Use the profile in the specified path

- **--help**

  Show help options

- **--version**

  Show version

Notes:

-

  1\) \[DEVICE\] is given as the full path to the cdc-wdm character device, e.g.:

-

  */dev/cdc-wdm0*

-

  2\) The qmi-network script requires a profile to work. Unless explicitly specified with \`--profile', the file is assumed to be available in the following path:

-

  */etc/qmi-network.conf*

-

  3\) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called 'internet'):

-

  APN=internet

-

  4\) Optional APN user/password strings may be given in the following way:

-

  APN\_USER=user APN\_PASS=password

-

  5\) Optional IP\_TYPE strings may be given in the following way:

-

  IP\_TYPE=\[4\|6\]

-

  6\) If you want to instruct the qmi-network script to use the qmi-proxy setup, you can do so by configuring the following line in the profile:

-

  PROXY=yes

-

  7\) To instruct the qmi-network script to use an already existing Profile ID, or to create a new one on the fly, use the following configuration in the profile:

- PROFILE=number

  \# to use the profile-id number

- PROFILE=auto

  \# to create a temporary profile on the fly

-

  8\) Once the qmi-network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.

## COPYRIGHT

Copyright © 2013-2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later \<http://gnu.org/licenses/gpl-2.0.html\>\
 This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

## SEE ALSO

The full documentation for **qmi-network** is maintained as a Texinfo manual.  If the **info** and **qmi-network** programs are properly installed at your site, the command

-

  **info qmi-network**

should give you access to the complete manual.