picp-isp(1) · carta

Usage

picp ttyname devtype [-h] [-q] [-v] [-s [size]] [{-b | -r | -w | -e}] [pcido]

Overview

This manual page documents briefly the picp command. This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.

picp is a utility which allows you to use the Microchip PICSTART programmer, where you would normally be required to use the Windows software.

picp-isp should be used for programming ICSP devices using the Warp-13 programmer. So far it appears that picp-isp is only required with Warp-13 firmware BluePole version 1.5. Try picp first, and if it fails, then picp-isp.

Options

A summary of options is included below.

-h: Show summary of options.

-s: [size] shows a hash mark status bar of length [size] while erasing/writing

-q: sets quiet mode (excess messages supressed)

-r: initiates a read (Intel Hex record format)

-b: blank checks the requested region or regions

-f: ignores verify errors while writing

-w: writes to the requested region

-e: erases the requested region (flash parts only)

-v: Shows PICSTART Plus version number

`p [filename]`	program memory, optionally reading/writing filename
`c [val]`	configuration bits (val is a numeric word value when writing)
`i [val]`	ID locations
`d [filename]`	data memory, optionally reading/writing filename
`o [val]`	oscillator calibration space
`filename`	optional input or output file (default is stdin/stdout)

Notes

Flags are operated on in order, from left to right. If any operation fails, further execution is aborted. Thus, a part can be blank checked and programmed with a single command, e.g.:

picp /dev/ttyS0 16c505 -bp -wp program.hex

This example will blank check the program memory of a PIC16C505 then write the contents of the file program.hex to the program memory only if the blank check succeeded. The -wc, -wi, and -wo options must be followed by a numeric argument which represents the value. The number may be binary (preceeded by 0b or 0B), hex (preceeded by 0x or 0X), or decimal (anything else).

supported devices:

12C508, 12C508A, 12C509, 12C509A, 12CE518, 12CE519, 12F629, 12C671, 12C672, 12CE673, 12CE674, 12F675, 14000, 16C505, 16C52, 16C54, 16C54A, 16C54B, 16C54C, 16HV540, 16C55, 16C55A, 16C554, 16C558, 16C56, 16C56A, 16C57, 16C57C, 16C58A, 16C58B, 16C61, 16C62, 16C62A, 16C62B, 16C620, 16C620A, 16C621, 16C621A, 16C622, 16C622A, 16CE623, 16CE624, 16CE625, 16F627, 16F628, 16F628A, 16C63, 16C63A, 16F630, 16C64, 16C64A, 16C642, 16F648A, 16C65, 16C65A, 16C65B, 16C66, 16C662, 16C67, 16F676, 16C71, 16C710, 16C711, 16C712, 16C715, 16C716, 16C717, 16C72, 16F72, 16C72A, 16C73, 16F73, 16C73A, 16C73B, 16C74, 16F74, 16C74A, 16C74B, 16C745, 16C76, 16F76, 16C765, 16C77, 16F77, 16C770, 16C771, 16C773, 16C774, 16C781, 16C782, 16F818, 16F819, 16F83, 16C84, 16F84, 16F84A, 16F870, 16F871, 16F872, 16F873, 16F873A, 16F874, 16F874A, 16F876, 16F876A, 16F877, 16F877A, 16C923, 16C924, 16C925, 16C926, 17C42, 17C42A, 17C43, 17C44, 17C752, 17C756, 17C756A, 17C762, 17C766, 18C242, 18F242, 18F248, 18C252, 18F252, 18F258, 18C442, 18F442, 18F448, 18C452, 18F452, 18F458, 18C658, 18C858, rf509AF, rf509AG, 18F6520