piconfig1
Configure an ottawa pi2 card.
Usage
piconfig [-a]
[-i]
[-v]
interface
[speed
NN]
[clockmode
NN]
[txdelay
NN]
[persist
NN]
[slot
NN]
[squelch
NN]
[irq
NN]
[dma
NN]
Overview
Piconfig allows you to configure certain parameters that govern the way an Ottawa PI2 card operate.
Options
-
-a -
not yet implemented.
-
-i -
not yet implemented.
-
-v -
not yet implemented.
interface-
is the name of the PI network device to be configured.
- dma NN
-
sets the hardware dma channel for the port to NN.
- irq NN
-
sets the hardware irq for the port to NN.
- speed NN
-
sets the data bit clock to NN bits per second.
- clockmode NN
-
sets the clockmode for the port.
0for internally clocked.1for externally clocked.
- txdelay NN
-
sets the transmit delay for the port, in units of 10 mS.
- slot NN
-
sets the slottime timer for the port, in units of 10 mS.
- squelch NN
-
sets the squelch timer for the port, in units of 10 mS.
- persist NN
-
sets the persistence parameters to NN. (0 <- NN <- 255).
Releases
Unchanged in 2 releases since Debian 2.0 (Hamm).