partclone.VMFS_volume_member8

Overview

partclone.[fstype] is a part of Partclone project. Partclone provide utilities to backup used blocks and design for higher compatibility of the file system by using existing library, e.g. e2fslibs is used to read the used block of ext2 partition.

Partclone supported file system include btrfs, ext2, ext3, ext4, reiserfs, reiser4, xfs and jfs for LINUX. Also support some non-linux operation system, ex: NTFS, FAT and EXFAT (for Windows), HFS plus (APPLE MAC OS), UFS2 (FreeBSD), VMFS (VMWare Vsphere) and MINIX (MINIX3).

All partclone utils could be run like partclone.[fstype] is very smiliar fsck or mkfs. For example, for backup/restore hfsplus, just run partclone.hfsp

       File System                 partclone.[fstype]
       btrfs                       partclone.btrfs
       ext2, ext3, ext4            partclone.[ext2 | ext3 | ext4]
       reiserfs 3.5                partclone.reiserfs
       reiser 4                    partclone.reiser4
       xfs                         partclone.xfs
       ufs | ufs2                  partclone.ufs
       jfs                         partclone.jfs
       hfs plusfs                  partclone.[hfs+ | hfsplus]
       vmfs                        partclone.[vmfs | vmfs5]
       ntfs                        partclone.ntfs
       fat12, fat16, fat32         partclone.[fat12 | fat16 | fat32]
       exfat                       partclone.exfat
       minix                       partclone.minix
       f2fs                        partclone.f2fs
       nilfs2                      partclone.nilfs2
       apfs                        partclone.apfs
       others (Not Supported FS)   partclone.imager

Options

The program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.

-s FILE, --source FILE

Source FILE. The FILE could be a image file (made by partclone) or device depend on your action. Normally, backup source is device, restore source is image file.

Receving data from pipe line is supported ONLY for restoring, just ignore -s option or use '-' means receive data from stdin.

-o FILE, --output FILE

Output FILE. The FILE could be a image file (partclone will generate) or device depend on your action. Normally, backup output to image file and restore output to device.

Sending data to pipe line is also supported ONLY for back-up, just ignore -o option or use '-' means send data to stdout.

-O FILE, --overwrite FILE

Overwrite FILE, overwriting if exists.

-W FILE, --restore_raw_file FILE

create special raw file for loop device.

-c, --clone

Save partition to the special image format.

-r, --restore

Restore partition from the special image format.

-b, --dev-to-dev

Local device to device copy on-the-fly, source and output both are device.

-D, --domain

Create GNU Ddrescue domain log file from source device. This is a human readable file in which + marks used block areas and ? marks free areas.

--offset_domain=X

Add X (in bytes) to all positions reported in the domain log file

--restore_raw_file

Creating special raw file for loop device.

-L FILE, --logfile FILE

put special path to record partclone log information. (default /var/log/partclone.log)

-R, --rescue

Continue after disk read errors.

-C, --no_check

Don't check device size and free space.

-N, --ncurses

Using Ncurses Text User Interface.

-I, --ignore_fschk

Ignore filesystem check.

-i, --ignore_crc

Ignore crc check error.

-F, --force

Force progress.

-f sec, --UI-fresh sec

put special second to different interval.

-z size, --buffer_size size

Read/write buffer size (default: 1048576)

-q, --quiet

Disable progress message.

-dlevel, --debug level

Set the debug level [1|2|3]

-x, --compresscmd CMD

Start CMD as an output pipe to compress the cloned image

-aX, --checksum-mode=X

Checksum formula to use to add error detection

where X:

0: No checksum (no slowdown, smallest image)

1: CRC32 (Fast to compute, basic detection)

-kX, --blocks-per-checksum=X

Write one checksum for every X blocks

-w, --skip_write_error

Continue restore while write errors

--write-direct-io

Writing data to TARGET partition without cache

--read-direct-io

Reading data from SOURCE partition without cache

-B, --no_block_detail

Show progress message without block detail

--binary-prefix

Show progress with bit size (default is MB, GB...)

--prog-second

Show progress in seconds (default is minute)

-E, --offset=X

Add offset X (bytes) to OUTPUT

-T, --btfiles

Restore block as file for ClonezillaBT.

-t, --btfiles_torrent

Restore block as file for ClonezillaBT but only generate torrent.

-n, --note NOTE

Display Message Note (128 words).

-h, --help

Show summary of options.

-v, --version

Show version of program.

Files

/var/log/partclone.log

Examples

 clone /dev/hda1 to hda1.img and display debug information.
   partclone.ext3 -c -d -s /dev/hda1 -o hda1.img
 restore /dev/hda1 from hda1.img and display debug information.
   partclone.extfs -r -d -s hda1.img -o /dev/hda1
 restore image from clonezilla (split, gzip,) with stdin source
   cat sda1.ext3-ptcl-img.gz.a* | gunzip -c | partclone.ext3 -d -r -s - -o /dev/sda1

Diagnostics

The following diagnostics may be issued on stderr:

partclone provides some return codes, that can be used in scripts: