---
name: "nvme-solidigm-clear-pcie-correctable-errors"
section: "1"
platform: "linux"
package: "nvme-cli"
version: "3.2-1"
release: "Arch Linux 2026-11-01"
platforms: ["linux"]
url: "https://new.carta.tech/nvme-solidigm-clear-pcie-correctable-errors"
---

# nvme-solidigm-clear-pcie-correctable-errors(1)

Clear PCIe Correctable Error Counters

## NAME

nvme-solidigm-clear-pcie-correctable-errors - Clear PCIe Correctable Error Counters

## SYNOPSIS

```
nvme [<global-options>] solidigm clear-pcie-correctable-errors <device>
                        [--no-uuid | -n]
```

## DESCRIPTION

This command is a redirect to the OCP plugin’s clear PCIe correctable error counters command. For detailed usage and options, please refer to the documentation for *nvme* \[\<global-options\>\] ocp clear-pcie-correctable-error-counters.

The \<device\> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0) or block device (ex: /dev/nvme0n1).

## OPTIONS

- \-n, --no-uuid

  Do not try to automatically detect UUID index for this command (required for old OCP 1.0 support). This option is necessary for devices that do not support OCP 2.0 or NVMe 1.4.

## GLOBAL OPTIONS

The following options are defined at the top-level nvme command and are available to this subcommand:

- \--dry-run

  Print the command that would be executed, but do not actually execute it.

- \--no-ioctl-probing

  Disable probing for 64-bit IOCTL support.

- \--no-retries

  Disable retry logic on transient errors.

- \-o \<fmt\>, --output-format=\<fmt\>

  Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time.

- \--output-format-version=\<version\>

  Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names. Other versions are rejected.

- \--quiet

  Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level.

- \--set-options=\<key=value\>\[,\<key=value\>...\]

  Set libnvme library options for this invocation. Supported keys are *force-4k*, *mi-probe-enabled*, *test-base-dir* and *test-sysfs-dir*.

- \--timeout=\<ms\>

  Set the timeout for the command in milliseconds. *infinite* or *-1* waits without a time limit (0xffffffff).

- \-v, --verbose

  Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/nvme-cli.conf/5.md). A command-line flag always overrides the file.

## EXAMPLES

• Clear PCIe Correctable Error Counters for the device:

```
# nvme solidigm clear-pcie-correctable-errors /dev/nvme0
```

• Clear PCIe Correctable Error Counters for an OCP 1.0 device:

```
# nvme solidigm clear-pcie-correctable-errors /dev/nvme0 --no-uuid
```

## SEE ALSO

[nvme-ocp-clear-pcie-correctable-error-counters(1)](/nvme-ocp-clear-pcie-correctable-error-counters/1.md)

## NVME

Part of the nvme-cli suite.