---
name: "nvme-micron-smart-add-log"
section: "1"
platform: "linux"
package: "nvme-cli"
version: "3.2-1"
release: "Arch Linux 2026-11-01"
platforms: ["linux"]
url: "https://new.carta.tech/nvme-micron-smart-add-log"
---

# nvme-micron-smart-add-log(1)

Retrieves NAND statistics (2200 model drives) or Extended SMART information (OCP complaint models) of given micron device

## NAME

nvme-micron-smart-add-log - Retrieves NAND statistics (2200 model drives) or Extended SMART information (OCP complaint models) of given micron device

## SYNOPSIS

```
nvme [<global-options>] micron vs-smart-add-log <device> -f <json|normal>
```

## DESCRIPTION

This command prints NAND information (Total bytes written, Bad block count and Erase failures etc) for the given micron device if its of 2200 model controller. For OCP complaint controllers this command print extended SMART health data along with NAND information (if available)

The \<device\> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

The *-f* option controls the displayed output data format based on the option value. If the option value is *json* (which is enabled by default), output data is printed in JSON format. If option value is *normal* the output is displayed in non-JSON format.

This will only work on Micron devices devices of model numbers 54XX and OCP complaint controllers. Support for new devices may be added subsequently.

## OPTIONS

- \-f \<json\|normal\>

  Controls the format of displayed output.

## GLOBAL OPTIONS

The following options are defined at the top-level nvme command and are available to this subcommand:

- \--dry-run

  Print the command that would be executed, but do not actually execute it.

- \--no-ioctl-probing

  Disable probing for 64-bit IOCTL support.

- \--no-retries

  Disable retry logic on transient errors.

- \-o \<fmt\>, --output-format=\<fmt\>

  Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time.

- \--output-format-version=\<version\>

  Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names. Other versions are rejected.

- \--quiet

  Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level.

- \--set-options=\<key=value\>\[,\<key=value\>...\]

  Set libnvme library options for this invocation. Supported keys are *force-4k*, *mi-probe-enabled*, *test-base-dir* and *test-sysfs-dir*.

- \--timeout=\<ms\>

  Set the timeout for the command in milliseconds. *infinite* or *-1* waits without a time limit (0xffffffff).

- \-v, --verbose

  Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/nvme-cli.conf/5.md). A command-line flag always overrides the file.

## EXAMPLES

• Retrieve NAND/extended SMART data and display in json format

```
# nvme micron vs-nand-stats /dev/nvme0
* Retrieve NAND/extended SMART data and display in non-json format
+
```

\# nvme micron vs-nand-stats /dev/nvme0 -f normal

```
NVME
```

Part of the nvme-user suite