---
name: "nvme-lnvm-diag-set-bbtbl"
section: "1"
platform: "linux"
package: "nvme-cli"
version: "1.12-5"
release: "Debian 11 (Bullseye)"
platforms: ["linux"]
url: "https://new.carta.tech/nvme-lnvm-diag-set-bbtbl"
---

# nvme-lnvm-diag-set-bbtbl(1)

Set a block state in the bad block table

## NAME

nvme-lnvm-diag-set-bbtbl - Set a block state in the bad block table

## SYNOPSIS

```
nvme lnvm-diag-set-bbtbl [--namespace-id=<NUM> | -n <NUM>]
                        [--channel-id=<CHID> | -c <CHID>]
                        [--lun-id=<LUNID> | -l <LUNID>]
                        [--plane-id=<PLANEID> | -p <PLANEID>]
                        [--block-id=<BLKID> | -b <BLKID>]
                        [--value=<NUM> | -v <NUM>]
```

## DESCRIPTION

Set the bad block table for a given channel, lun, plane and block with value v.

For each block available, the status byte is read as follows:

0: Good block 1: Bad block 2: Grown bad block 4: Device reserved block 8: Host-side reserved block 16: Media managed reserved block

## OPTIONS

- \--namespace-id=\<NUM\>, -n \<NUM\>

  Namespace id to use

- \--channel-id, -c

  Channel id

- \--lun-id, -l

  LUN id

- \--plane-id, -p

  Plane id

- \--block-id, -b

  Block id

## EXAMPLES

• Set channel 0, lun 0, plane 0, block 10 to bad block value 2 (grown bad) on physical device /dev/nvme0

```
# nvme lnvm-diag-set-bbtbl /dev/nvme0 -c 0 -l 0 -p 0 -b 10 -v 2
```

## NVME

Part of the nvme-user suite