NAME
nmrpflash -- firmware flash utility for Netgear devices
USAGE
nmrpflash [OPTION...]
OPTIONS
-i, and -f or -c are mandatory
- -a ipaddr
-
IP address to assign to target device
- -A ipaddr
-
IP address to assign to selected interface
- -B
-
Blind mode (don't wait for response packets)
- -c command
-
Command to run before (or instead of) TFTP upload
- -f firmware
-
Firmware file
- -F filename
-
Remote filename to use during TFTP upload
- -i interface
-
Network interface directly connected to device
- -m mac
-
MAC address of target device (xx:xx:xx:xx:xx:xx)
- -M netmask
-
Subnet mask to assign to target device
- -t timeout
-
Timeout (in milliseconds) for NMRP packets
- -T timeout
-
Time (seconds) to wait after successful TFTP upload
- -p port
-
Port to use for TFTP upload
- -R region
-
Set device region (NA, WW, GR, PR, RU, BZ, IN, KO, JP)
- -v
-
Be verbose
- -V
-
Print version and exit
- -L
-
List network interfaces
- -h
-
Show this screen
EXAMPLES
(run as root)
# nmrpflash -i eth0 -f firmware.bin
When using -c, the environment variables IP, PORT, NETMASK and MAC are set to the device IP address, TFTP port, subnet mask and MAC address, respectively.
COPYRIGHT & LICENSE
nmrpflash Copyright (C) 2016 Joseph C. Lehner
nmrpflash is free software, licensed under the GNU GPLv3. Source code at <https://github.com/jclehner/nmrpflash>
This documentation was created by Damyan Ivanov [email protected] from the "nmrpflash" help text. Licensed under the same terms as the upstream source code.