morse_sync1
Tool to synchronize the morse simulator
Usage
morse_sync [-h]
[-d]
[-H
host]
[-P
port]
[-t
timeout]
-p
<period>
Overview
morse_sync is a tool which sends a periodic signal to the Morse simulator, allowing to synchronize it to an external clock. It relies on the socket synchronisation protocol of Morse.
Moreover, morse_sync reads command on its input. It accepts the following commands:
quit-
End the
morse_synctool
- set_period <period>
-
Change the period of message sent
Options
-
-d, --debug -
Enable debug information
-
-H, --host <host> -
Configure the host where Morse is running
-
-P, --port <port> -
Configure the port of the synchronisation socket of Morse
-
-p, --period <period> -
Configure the period (in sec) to which the signal is sent to Morse
-
-h, --help -
Displays information regarding the program use.
-
-t, --timeout <timeout> -
Configure time (in sec) during
morse_synctries to connect to the Morse synchronisation socket. It is particularly useful to handle delay in the Morse initialisation. The default value is 10 sec.
History
- Debian 12 (Bookworm): the text shown here
- Debian 10 (Buster)
- Debian 9 (Stretch)