umps3-mkdev1

Usage

Overview

The command-line umps3-mkdev utility is used to create the files that represent disk and flash devices.

DISKS:

Disks in uMPS3 are “direct access” nonvolatile read/write devices. The umps3-mkdev utility allows one to create an empty disk only; this way an OS developer may elect any desired disk data organization.

The created DISKFILE represents the entire disk contents, even

when empty. Hence this file may be very large. It is recommended to create small disks which can be used to represent a little portion of an otherwise very large disk unit.

As with real disks, differing performance statistics result in differing

simulated drive performance. E.g. a faster rotation speed results in less latency delay and a smaller sector data occupancy percentage results in shorter read/write times.

The default values for all these parameters are shown when entering the

umps3-mkdev alone without any parameters.

FLASH DEVICES:

Flash devices in uMPS3 are “random access” nonvolatile read/write devices. A uMPS3 flash device is essentially equivalent to a seek-free one-dimensional disk drive. The umps3-mkdev utility allows one to create both slow flash devices (e.g. USB stick) or fast flash devices (e.g. SSDs). Furthermore, the utility allows one to create both empty flash devices as well as ones preloaded with a specific file.

The created FLASHFILE represents the entire device contents,

even when empty. Hence this file may be very large. It is recommended to create small flash devices which can be used to represent a little portion of an otherwise very large device.

uMPS3 caps the maximum block size for flash devices at 2^24.

This translates to a maximum device size of 64GB.

As with real flash devices, read operations are faster than write

operations. The read speed for uMPS3 flash devices is fixed at 75% of the device write time in microseconds.

The default values for all these parameters are shown when entering the

umps3-mkdev alone without any parameters.

Options

-d

instructs the utility to build a disk file image.

-f

instructs the utility to build a flash device file image.

Files

DISKFILE

is the name of the disk file image to be created.

FLASHFILE

is the name of the flash device file image to be created.

FILE

is the name of the file to be preloaded onto the device beginning with block 0. If one wishes to create an empty flash device but still specify some of the additional parameters, use /dev/null as the FILE argument. To load a flash device with a collection of files, it is recommended to initially create a single .tar file from the collection and then use this single .tar file for this parameter. We recommend the .tar file format due to its simple structure.

Diskoptions

[CYL [HEAD [SECT [RPM [SEEKT [DATAS]]]]]]

CYL:

Number of cylinders: [1..65535], default = 32

HEAD:

Number of heads/surfaces: [1..255], default = 2

SECT:

Number of 4KB sectors/tracks: [1..255], default = 8

RPM:

Disk rotations per minute: [360..10800], default = 3600

SEEKT:

Average cylinder to cylinder seek time in microseconds: [1..10000], default = 100

DATAS:

Sector data occupation %: [10%..90%], default = 80%

Flashoptions

[BLOCKS [WT]]