teensy_loader_cli1

Load and run programs onto your teensy micro controller

Usage

teensy_loader_cli --mcu MCU [-w] [-r] [-s] [-n] [-b] [-v] [-h] file.hex

Overview

The teensy loader cli is a command-line alternative to the graphical teensy loader which is included with Teensyduino. The cli version is preferred by advanced users who want to automate programming, typically from within a Makefile or similar.

Options

--mcu: Specify which connected Teensy controller to work with (e.g. TEENSY36). To list supported MCUs, use:

teensy_loader_cli --list-mcus

-w: Wait for device to appear

-r

Use hard reboot if device not online.

This option requires another Teensy to be connected, running the rebootor firmware.

-s: Use soft reboot if device not online (Teensy 3.x only)

-n: No reboot after programming

-b: Boot only, do not program

-v: Verbose output

Releases

Unchanged in 4 releases since Debian 10 (Buster).

10–13