raidz_test1

Usage

Overview

The purpose of this tool is to run all supported raidz implementation and verify the results of all methods. It also contains a parameter sweep option where all parameters affecting a RAID-Z block are verified (like ashift size, data offset, data size, etc.). The tool also supports a benchmarking mode using the -B option.

Option

-h

Print a help summary.

-a ashift (default: 9)

Ashift value.

-o zio_off_shift (default: 0)

ZIO offset for each raidz block. The offset's value is 2^zio_off_shift.

-d raidz_data_disks (default: 8)

Number of raidz data disks to use. Additional disks will be used for parity.

-s zio_size_shift (default: 19)

Size of data for raidz block. The real size is 2^zio_size_shift.

-r reflow_offset (default: uint max)

Set raidz expansion offset. The expanded raidz map allocation function will produce different map configurations depending on this value.

-S(weep)

Sweep parameter space while verifying the raidz implementations. This option will exhaust all most of valid values for the -aods options. Runtime using this option will be long.

-t(imeout)

Wall time for sweep test in seconds. The actual runtime could be longer.

-B(enchmark)

All implementations are benchmarked using increasing per disk data size. Results are given as throughput per disk, measured in MiB/s.

-e(xpansion)

Use expanded raidz map allocation function.

-v(erbose)

Increase verbosity.

-T(est the test)

Debugging option: fail all tests. This is to check if tests would properly verify bit-exactness.

-D(ebug)

Debugging option: attach gdb(1) when SIGSEGV or SIGABRT are received.