nbd_zero3

Usage

 #include <libnbd.h>
 int nbd_zero (
       struct nbd_handle *h, uint64_t count,
       uint64_t offset, uint32_t flags
     );

Overview

Issue a write zeroes command to the NBD server, which if supported by the server causes a zeroes to be written efficiently starting at "offset" and ending at "offset" + "count" - 1. The call returns when the command has been acknowledged by the server, or there is an error. Note this will generally return an error if nbd_can_zero(3) is false or nbd_is_read_only(3) is true.

Note that not all servers can support a "count" of 4GiB or larger; nbd_get_extended_headers_negotiated(3) indicates which servers will parse a request larger than 32 bits. The NBD protocol does not yet have a way for a client to learn if the server will enforce an even smaller maximum zero size, although a future extension may add a constraint visible in nbd_get_block_size(3). Also, some servers may permit a larger zero request only when the "LIBNBD_CMD_FLAG_FAST_ZERO" is in use.

The "flags" parameter may be 0 for no flags, or may contain "LIBNBD_CMD_FLAG_FUA" meaning that the server should not return until the data has been committed to permanent storage (if that is supported - some servers cannot do this, see nbd_can_fua(3)), "LIBNBD_CMD_FLAG_NO_HOLE" meaning that the server should favor writing actual allocated zeroes over punching a hole, and/or "LIBNBD_CMD_FLAG_FAST_ZERO" meaning that the server must fail quickly if writing zeroes is no faster than a normal write (if that is supported - some servers cannot do this, see nbd_can_fast_zero(3)).

By default, libnbd will reject attempts to use this function with parameters that are likely to result in server failure, such as requesting an unknown command flag. The nbd_set_strict_mode(3) function can be used to alter which scenarios should await a server reply rather than failing fast.

Return value

If the call is successful the function returns 0.

Errors

On error -1 is returned.

Refer to "ERROR HANDLING" in libnbd(3) for how to get further details of the error.

The following parameters must not be NULL: "h". For more information see "Non-NULL parameters" in libnbd(3).

Handle state

nbd_zero can be called when the handle is in the following state:

 ┌─────────────────────────────────────┬─────────────────────────┐
 │ Handle created, before connecting   │ ❌ error                │
 │ Connecting                          │ ❌ error                │
 │ Connecting & handshaking (opt_mode) │ ❌ error                │
 │ Connected to the server             │ ✅ allowed              │
 │ Connection shut down                │ ❌ error                │
 │ Handle dead                         │ ❌ error                │
 └─────────────────────────────────────┴─────────────────────────┘

Version

This function first appeared in libnbd 1.0.

If you need to test if this function is available at compile time check if the following macro is defined:

 #define LIBNBD_HAVE_NBD_ZERO 1