marouter1

Configuration Options:

-c, --configuration-file FILE

Loads the named config on startup

-C, --save-configuration FILE

Saves current configuration into FILE

--save-configuration.relative

Enforce relative paths when saving the configuration

--save-template FILE

Saves a configuration template (empty) into FILE

--save-schema FILE

Saves the configuration schema into FILE

--save-commented

Adds comments to saved template, configuration, or schema

Input Options:

-n, --net-file FILE

Use FILE as SUMO-network to route on

-a, --additional-files FILE

Read additional network data (districts, bus stops) from FILE(s)

-r, --route-files FILE

Read sumo routes, alternatives, flows, and trips from FILE(s)

--phemlight-path FILE

Determines where to load PHEMlight definitions from

--phemlight-year INT

Enable fleet age modelling with the given reference year in PHEMlight5

--phemlight-temperature FLOAT

Set ambient temperature to correct NOx emissions in PHEMlight5

-w, --weight-files FILE

Read network weights from FILE(s)

--lane-weight-files FILE

Read lane-based network weights from FILE(s)

-x, --weight-attribute STR

Name of the xml attribute which gives the edge weight

--junction-taz

Initialize a TAZ for every junction to use attributes toJunction and fromJunction

-m, --od-matrix-files FILE

Loads O/D-files from FILE(s)

--od-amitran-files FILE

Loads O/D-matrix in Amitran format from FILE(s)

-z, --tazrelation-files FILE

Loads O/D-matrix in tazRelation format from FILE(s)

--tazrelation-attribute STR

Define data attribute for loading counts (default 'count')

--weight-adaption FLOAT

The travel time influence of prior intervals

--taz-param STR[]

Parameter key(s) defining source (and sink) taz

--ignore-taz

Ignore attributes 'fromTaz' and 'toTaz'

Output Options:

-o, --output-file FILE

Write generated routes to FILE

--vtype-output FILE

Write used vehicle types into separate FILE

--keep-vtype-distributions

Keep vTypeDistribution ids when writing vehicles and their types

--emissions.volumetric-fuel

Return fuel consumption values in (legacy) unit l instead of mg

--named-routes

Write vehicles that reference routes by their id

--write-license

Include license info into every output file

--output-prefix STR

Prefix which is applied to all output files. The special string 'TIME' is replaced by the current time.

--precision INT

Defines the number of digits after the comma for floating point output

--precision.geo INT

Defines the number of digits after the comma for lon,lat output

-H, --human-readable-time

Write time values as hour:minute:second or day:hour:minute:second rather than seconds

--ignore-vehicle-type

Does not save vtype information

--netload-output FILE

Writes edge loads and final costs into FILE

--all-pairs-output FILE

Writes complete distance matrix into FILE

--exit-times

Write exit times (weights) for each edge

Processing Options:

--max-alternatives INT

Prune the number of alternatives to INT

--with-taz

Use origin and destination zones (districts) for in- and output

--routing-threads INT

The number of parallel execution threads used for routing

--routing-algorithm STR

Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']

--restriction-params STR[]

Comma separated list of param keys to compare for additional restrictions

--weights.interpolate

Interpolate edge weights at interval boundaries

--weights.expand

Expand the end of the last loaded weight interval to infinity

--weights.minor-penalty FLOAT

Apply the given time penalty when computing routing costs for minor-link internal lanes

--aggregation-interval TIME

Defines the time interval when aggregating single vehicle input; Defaults to one hour

--capacities.default

Ignore edge priorities when calculating capacities and restraints

--weights.priority-factor FLOAT

Consider edge priorities in addition to travel times, weighted by factor

--bulk-routing.vtypes

Aggregate routing queries with the same origin for different vehicle types

--weight-period TIME

Aggregation period for the given weight files; triggers rebuilding of Contraction Hierarchy

-s, --scale FLOAT

Scales the loaded flows by FLOAT

--vtype STR

Defines the name of the vehicle type to use

--prefix STR

Defines the prefix for vehicle flow names

--timeline STR[]

Uses STR[] as a timeline definition

--timeline.day-in-hours

Uses STR as a 24h-timeline definition

--additive-traffic

Keep traffic flows of all time slots in the net

--assignment-method STR

Choose a assignment method: incremental, UE or SUE

--tolerance FLOAT

Use FLOAT as tolerance when checking for SUE stability

--left-turn-penalty FLOAT

Use left-turn penalty FLOAT to calculate link travel time when searching routes

--paths INT

Use INTEGER as the number of paths needed to be searched for each OD pair at each iteration

--paths.penalty FLOAT

Penalize existing routes with FLOAT to find secondary routes

--upperbound FLOAT

Use FLOAT as the upper bound to determine auxiliary link cost

--lowerbound FLOAT

Use FLOAT as the lower bound to determine auxiliary link cost

-i, --max-iterations INT

maximal number of iterations for new route searching in incremental and stochastic user assignment

--max-inner-iterations INT

maximal number of inner iterations for user equilibrium calculation in the stochastic user assignment

--route-choice-method STR

Choose a route choice method: gawron, logit, or lohse

--gawron.beta FLOAT

Use FLOAT as Gawron's beta

--gawron.a FLOAT

Use FLOAT as Gawron's a

--keep-all-routes

Save routes with near zero probability

--skip-new-routes

Only reuse routes from input, do not calculate new ones

--logit.beta FLOAT

Use FLOAT as (c-)logit's beta for the commonality factor

--logit.gamma FLOAT

Use FLOAT as (c-)logit's gamma for the commonality factor

--logit.theta FLOAT

Use FLOAT as (c-)logit's theta

Defaults Options:

--flow-output.departlane STR

Assigns a default depart lane

--flow-output.departpos STR

Assigns a default depart position

--flow-output.departspeed STR

Assigns a default depart speed

--flow-output.arrivallane STR

Assigns a default arrival lane

--flow-output.arrivalpos STR

Assigns a default arrival position

--flow-output.arrivalspeed STR

Assigns a default arrival speed

Time Options:

-b, --begin TIME

Defines the begin time; Previous trips will be discarded

-e, --end TIME

Defines the end time; Later trips will be discarded; Defaults to the maximum time that SUMO can represent

Report Options:

-v, --verbose

Switches to verbose output

--print-options

Prints option values before processing

-?, --help

Prints this screen or selected topics

-V, --version

Prints the current version

-X, --xml-validation STR

Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")

--xml-validation.net STR

Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always")

--xml-validation.routes STR

Set schema validation scheme of SUMO route inputs ("never", "local", "auto" or "always")

-W, --no-warnings

Disables output of warnings

--aggregate-warnings INT

Aggregate warnings of the same type whenever more than INT occur

-l, --log FILE

Writes all messages to FILE (implies verbose)

--message-log FILE

Writes all non-error messages to FILE (implies verbose)

--error-log FILE

Writes all warnings and errors to FILE

--language STR

Language to use in messages

--ignore-errors

Continue if a route could not be build

--stats-period INT

Defines how often statistics shall be printed

--no-step-log

Disable console output of route parsing step

Random Number Options:

--random

Initialises the random number generator with the current system time

--seed INT

Initialises the random number generator with the given value