indiserver1
Indi server for telescope control under kstars
Usage
indiserver [-p
port]
[-r
attempts]
[-vv]
driver
[driver ...]
Overview
KStars allows you to configure and control astronomical instruments such as telescopes and focusers via the INDI protocol. indiserver is a server that sits between the KStars user interface and the low-level hardware drivers.
The INDI server is a network server, in that either local or remote clients may connect to it to control astronomical instruments. The INDI server must be running on the machine that is physically connected to the astronomical instruments.
Note that there is no need for you to run the INDI server directly. Using the KStars device manager, you can set up astronomical instruments and start or stop the INDI server all from within KStars.
You may however choose to run the INDI server manually from the command line. In this case you must pass the names of one or more drivers for individual astronomical instruments. The current list of available drivers is:
celestrongps (Celestron GPS)
fliccd (Finger Lakes Instruments CCD)
lx200_16 (LX200 16")
lx200autostar (LX200 Autostar)
lx200classic (LX200 Classic)
lx200generic (LX200 Generic)
lx200gps (LX200 GPS)
temma (Temma Takahashi)
v4ldriver (Video4Linux Generic)
v4lphilips (Philips Webcam)
Much more detailed information can be found in the KStars Handbook, as described below.
KStars is a graphical desktop planetarium for KDE, and forms part of the official KDE edutainment module.
Options
-
-p port -
Specify the port to listen on (defaults to 7624).
-
-r attempts -
Specify the maximum number of restart attempts for each driver (defaults to 2).
-
-vv -
Write more verbose output to stderr.
Examples
To start an INDI server running an LX200 GPS driver and listening to connections on port 8000:
prompt$ indiserver -p 8000 lx200gps
Releases
3 releases since Debian 3.1 (Sarge); the text changed 1 time.