dtsec4
Freescale datapath acceleration architecture-based three-speed ethernet controller device driver
Usage
To compile this driver into the kernel, place the following lines in your kernel configuration file:
include "dpaa/config.dpaa" device dpaa device miibus
Overview
The dtsec driver provides support for the DPAA-based gigabit Ethernet controller integrated in some of the Freescale system-on-chip devices.
The dtsec driver supports the following media types:
- autoselect
-
Enable autoselection of the media type and options
- 10baseT/UTP
-
Set 10Mbps operation
- 100baseTX
-
Set 100Mbps operation
- 1000baseT
-
Set 1000baseT operation
The dtsec driver supports the following media options:
- full-duplex
-
Set full duplex operation
The dtsec driver supports two operating modes:
- Regular
-
Normal mode, utilizing the full datapath acceleration, Buffer Manager, and Queue Manager.
- Independent
-
Runs disconnected from the Buffer Manager and Queue Manager.
Hardware
Gigabit Ethernet controllers built into the following Freescale system-on-chip devices are known to work with the dtsec driver:
-
P2041, P3041
-
P5010, P5020
Additionally, the following devices are expected to work, but are untested:
-
P4080, P4040
-
P5040
Releases
9 releases since FreeBSD 14.0-RELEASE; the text changed 1 time.