dlt-control1

Send control messages to dlt daemon

Usage

dlt-control [-v] [-h] [-S] [-R] [-y] [-b baudrate] [-e ecuid] [-a id] [-c id] [-s id] [-m message] [-x message] [-t milliseconds] [-l level] [-r tracestatus] [-d loglevel] [-f tracestatus] [-i enable] [-o] [-g] [-j] [-u] [-p port] hostname/serial_device_name

Overview

Send control messages to DLT Daemon. This is useful when there is no client (e.g. DLT Viewer) available. It supports several control messages including: - Setting log level/trace level - Setting default log level/default trace level - Enable timing packets - Store configuration - Reset to factory default - Get logging information

Note Use -u option instead of hostname/serial_device_name if Unix Socket is used. See example for detail.

Options

-v: Verbose mode

-h: Usage

-S: Send message with serial header (Default: Without serial header)

-R: Enable resync serial header

-y: Serial device mode

-b: Serial device baudrate (Default: 115200)

-e: Set ECU ID (Default: RECV)

-a: Control message application id

-c: Control message context id

-s: Control message injection service id

-m: Control message injection in ASCII

-x: Control message injection in Hex e.g. `ad 01 24 ef'

-t: Timeout to terminate application (Default:1000)

-l

: Set the log level (0=off - 6=verbose, default= -1) supported options: -l level -a apid -c ctid -l level -a abc* (set level for all ctxts of apps name starts with abc) -l level -a apid (set level for all ctxts of this app) -l level -c xyz* (set level for all ctxts whose name starts with xyz) -l level -c ctid (set level for the particular ctxt) -l level (set level for all the registered contexts)

-r: Set the trace status (0=off - 1=on, default=255) supported options: -r tracestatus -a apid -c ctid -r tracestatus -a abc* (set status for all ctxts of apps name starts with abc) -r tracestatus -a apid (set status for all ctxts of this app) -r tracestatus -c xyz* (set status for all ctxts whose name starts with xyz) -r tracestatus -c ctid (set status for the particular ctxt) -r tracestatus (set status for all the registered contexts)

-d: Set the default log level (0=off - 5=verbose)

-f: Set the default trace status (0=off - 1=on)

-i: Enable timing packets (0=off - 1=on)

-o: Store configuration

-g: Reset to factory default

-j: Get log info

-u: unix port

-p: Port for TCP communication (Default: 3490).

Examples

Change log level of application “APP1” to DEBUG with unix port dlt-control -a APP1 -l 5 -u

Change log level of application “APP1” and context “CON1” to ERROR dlt-control -a APP1 -c CON1 -l 2 localhost

Get logging information of current running applications with unix port (IPC: Unix Socket) dlt-control -j -u

Get logging information of current running applications (IPC:FIFO) dlt-control -j localhost

Exit status

Non zero is returned in case of failure.

Releases

2 releases since Debian 12 (Bookworm); the text changed 1 time.