devlink-port8

devlink port set - change devlink port attributes

DEV/PORT_INDEX - specifies the devlink port to operate on.

Format is: BUS_NAME/BUS_ADDRESS/PORT_INDEX

type { eth | ib | auto }

Set port type.

eth - Ethernet

ib - Infiniband

auto - autoselect

devlink port split - split devlink port into more

DEV/PORT_INDEX - specifies the devlink port to operate on.

count COUNT

Number of ports to split into.

devlink port unsplit - unsplit previously split devlink port

Could be performed on any split port of the same split group.

DEV/PORT_INDEX - specifies the devlink port to operate on.

devlink port show - display devlink port attributes

DEV/PORT_INDEX - specifies the devlink port to show. If this argument is omitted all ports are listed.

devlink port health - devlink health reporting and recovery

Is an alias for devlink-health(8).

devlink port add - add a devlink port

DEV - specifies the devlink device to operate on, or

DEV/PORT_INDEX - specifies the devlink port index to use for the requested new port. This is optional. When omitted, driver allocates unique port index.

flavour { pcipf | pcisf }

set port flavour

pcipf - PCI PF port

pcisf - PCI SF port

pfnum PFNUMBER

Specifies the PCI PF number on which to create an SF device.

sfnum SFNUMBER

Specifies sfnumber to assign to the device of the SF. This field is optional for those devices which support auto assignment of the SF number.

controller CNUM

Specifies controller number for which the SF port is created. This field is optional. It is used only when SF port is created for the external controller.

devlink port function set - Set the port function attribute(s).

DEV/PORT_INDEX - specifies the devlink port to operate on.

hw_addr ADDR

Hardware address of the function to set. This is an Ethernet MAC address when port type is Ethernet.

state { active | inactive }

New state of the function to change to.

active - Once configuration of the function is done, activate the function.

inactive - To inactivate the function and its device(s), set to inactive.

roce { enable | disable }

Set the RoCE capability of the function.

migratable { enable | disable }

Set the migratable capability of the function.

ipsec_crypto { enable | disable }

Set the IPsec crypto offload capability of the function. Controls XFRM state crypto operation (Encrypt/Decrypt) offload.

ipsec_packet { enable | disable }

Set the IPsec packet offload capability of the function. Controls XFRM state and policy offload (Encrypt/Decrypt operation and IPsec encapsulation).

max_io_eqs EQS

Set the maximum number of IO event queues of the function.

devlink port del - delete a devlink port

DEV/PORT_INDEX - specifies the devlink port to delete.

devlink port param set - set new value to devlink port configuration parameter

DEV/PORT_INDEX - specifies the devlink port to operate on.

name PARAMETER

Specify parameter name to set.

value VALUE

New value to set.

cmode { runtime | driverinit | permanent }

Configuration mode in which the new value is set.

runtime - Set new value while driver is running. This configuration mode doesn't require any reset to apply the new value.

driverinit - Set new value which will be applied during driver initialization. This configuration mode requires restarting the driver by devlink reload command to apply the new value.

permanent - New value is written to device's non-volatile memory. This configuration mode requires hard reset to apply the new value.

devlink port param show - display devlink port supported configuration parameters attributes

DEV/PORT_INDEX - specifies the devlink port to operate on.

name PARAMETER Specify parameter name to show. If this argument, as well as port index, are omitted - all parameters supported by devlink device ports are listed.

devlink port function rate - manage devlink rate objects

Is an alias for devlink-rate(8).