arl4
Aironet arlan 655 wireless network adapter driver
Usage
To compile support for the
arl driver into your kernel, place the following line in your kernel configuration file:
device arl
Alternatively, to load the
arl driver at boot time, place the following line in loader.conf(5):
if_arl_load="YES"
Overview
The arl driver provides support for Aironet Arlan 655 wireless network adapters. The Arlan 655 series adapters operate at 354kbps, 512kbps, 1Mbps and 2Mbps.
The Aironet Arlan 655 devices support Aironet TMA, Aironet Non-TMA and PSP operating modes.
By default, the arl driver configures the Aironet Arlan 655 card for TMA operation.
To set up Radio Network parameters, use arlcontrol(8).
Limitations
When using ifconfig(8) for setting SSID you must use a 4-byte even hexadecimal digit value and it must start with 00 or 02.
You can change channel for current country only through ifconfig(8). You must use arlcontrol(8) for changing country.
Cannot change link-level address.