/dev/aacraid?
aacraid management interface
aacraid4
Adaptec series 6/7/8 6g and 12g sas+sata raid controller driver
Usage
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device pci device aacraid
To compile in debugging code: options AACRAID_DEBUG=N
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
aacraid_load="YES"
Overview
The aacraid driver provides support for the Adaptec by PMC RAID controllers, including Series 6/7/8 and upcoming families.
The RAID containers are handled via the aacraidp0 bus. The physical buses are represented by the aacraidp? devices (beginning with aacraidp1). These devices enable the SCSI pass-passthrough interface and allows devices connected to the card such as CD-ROMs to be available via the CAM scsi(4) subsystem. Note that not all cards allow this interface to be enabled.
The /dev/aacraid? device nodes provide access to the management interface of the controller. One node exists per installed card. If the aacraid_linux.ko and linux.ko modules are loaded, the Linux-compatible ioctl(2) interface for the management device will be enabled and will allow Linux-based management applications to control the card.
Hardware
The aacraid driver supports the following Adaptec 6G and 12G SAS/SATA RAID controllers:
-
Adaptec ASR-6405(T|E)
-
Adaptec ASR-6445
-
Adaptec ASR-6805(T|E|Q|TQ)
-
Adaptec ASR-7085
-
Adaptec ASR-7805(Q)
-
Adaptec ASR-70165
-
Adaptec ASR-71605(E|Q)
-
Adaptec ASR-71685
-
Adaptec ASR-72405
-
Adaptec Series 8 cards
Files
Diagnostics
Compiling with AACRAID_DEBUG set to a number between 0 and 3 will enable increasingly verbose debug messages.
The adapter can send status and alert messages asynchronously to the driver. These messages are printed on the system console, and are also queued for retrieval by a management application.
Releases
32 releases since FreeBSD 9.2-RELEASE; the text changed 20 times.