---
name: "lqr_carver_rigmask_add"
section: "3"
platform: "linux"
package: "liblqr-1-0-dev"
version: "0.4.1-2"
release: "Debian 7 (Wheezy)"
platforms: ["linux"]
url: "https://new.carta.tech/lqr_carver_rigmask_add_xy"
---

# lqr\_carver\_rigmask\_add(3)

update an LqrCarver rigidity mask

Part of [lqr\_carver\_rigmask\_add\_xy(3)](/lqr_carver_rigmask_add_xy/3.md).

## NAME

lqr\_carver\_rigmask\_add\_xy, lqr\_carver\_rigmask\_add\_area, lqr\_carver\_rigmask\_add, lqr\_carver\_rigmask\_add\_rgb\_area, lqr\_carver\_rigmask\_add\_rgb - update an LqrCarver rigidity mask

## SYNOPSIS

```
#include <lqr.h>
```

**LqrRetVal lqr\_carver\_rigmask\_add\_xy(LqrCarver\*** *carver***, gdouble** *rigidity***, gint** *x***, gint** *y***);**

**LqrRetVal lqr\_carver\_rigmask\_add\_area(LqrCarver\*** *carver***, gdouble\*** *buffer***, gint** *width***, gint** *height***, gint** *x\_off***, gint** *y\_off***);**

**LqrRetVal lqr\_carver\_rigmask\_add(LqrCarver\*** *carver***, gdouble\*** *buffer***);**

**LqrRetVal lqr\_carver\_rigmask\_add\_area(LqrCarver\*** *carver***, gdouble\*** *buffer***, gint** *channels***, gint** *width***, gint** *height***, gint** *x\_off***, gint** *y\_off***);**

**LqrRetVal lqr\_carver\_rigmask\_add\_rgb(LqrCarver\*** *carver***, gdouble\*** *buffer***, gint** *channels***);**

## FOREWORD

All the functions described in this page are used to add a rigidity mask to LqrCarver objects. Whenever one of these functions is called, a rigidity mask is activated for the whole image; the mask contains coefficients which modulate the value of the rigidity (which is set with [**lqr\_carver\_init**(3)](/lqr_carver_init/3.md)) in different areas of the image.

It is very important to note that using no rigidity masks at all is equivalent to use a rigidity mask over the whole image with all the values set to 1.0, but, when first adding a rigidity mask to a LqrCarver object, all the pixels outside the affected area will have their rigidity set to zero; therefore, the functions **lqr\_carver\_rigmask\_add\_xy**, **lqr\_carver\_rigmask\_add\_area** and **lqr\_carver\_rigmask\_add\_rgb\_area** actually affect the whole image, despite their name.

All the functions must be called after **lqr\_carver\_init** and before **lqr\_carver\_resize**. If called multiple times over the same area, new values will replace the old ones.

## SETTING THE RIGIDITY MASK PIXEL BY PIXEL

The function **lqr\_carver\_rigmask\_add\_xy** sets the rigidity mask value of the *x*, *y* pixel of the image loaded into the LqrCarver object pointed to by *carver*

## SETTING THE RIGIDITY MASK FROM A BUFFER

The function **lqr\_carver\_rigmask\_add\_area** adds a rigidity mask to an area of the image loaded in the LqrCarver object pointed to by *carver*.

The parameter *buffer* must point to an array of **doubles** of size *width* \* *height*, ordered first by rows, then by columns.

The offset of the area relative to the image are specified through *x\_off* and *y\_off*. The rigidity mask area can exceed the boundary of the image, and the offsets can be negative.

The values in the given *buffer* are scaled by the overall *rigidity* value set when calling the function **lqr\_carver\_init**.

The function **lqr\_carver\_rigmask\_add** can be used when the area to add is of the same size of the image loaded in the LqrCarver object and the offsets are 0.

## SETTING THE RIGIDITY MASK FROM AN IMAGE

The functions **lqr\_carver\_rigmask\_add\_rgb\_area** and **lqr\_carver\_rigmask\_add\_rgb** are very similar to **lqr\_carver\_rigmask\_add\_area** and **lqr\_carver\_rigmask\_add**, but use 8-bit multi-channel images as inputs.

The number of channels in the image is passed via the parameter *channels*. The last channel is assumed to be the alpha (opacity) channel if *channels* is equal to 2 or greater than 3 (if this is not the case, use the previous functions).

The rigidity value is computed from the average of the colour channels, multiplied by the value of the alpha channel if present. For example, in RGBA images a white, nontransparent pixel is equivalent to a value of 1.0 when using a buffer in **lqr\_carver\_rigmask\_add\_area**.

## RETURN VALUE

The return values follow the Liquid Rescale library signalling system.

## SEE ALSO

[**LqrRetVal**(3)](/LqrRetVal/3.md), [**lqr\_carver\_init**(3)](/lqr_carver_init/3.md), [**lqr\_carver\_bias\_add**(3)](/lqr_carver_bias_add/3.md)

## COPYRIGHT

Copyright © 2007-2009 Carlo Baldassi\